Recent content by MurkOff

I attached some pictures. Anyone done anything similar or know if there is a requirement for a specific design? Will I need to make a new main hoop? I can’t find anything in the rule book saying this isn’t allowed. Thank you. John

I am setting up my 1967 Dart to put a single turbo Gen 3 hemi 6.1 stroker that I built, into. I have just about completed the roll cage which I was setting up for an 8.50 Cert. This morning I started thinking about my main hoop design which is bent following the contours of the interior. It...

Thanks! Me too.

I read that thread too and missed that part! I'm in az and it's going on 8 days no rotors yet. Hopefully they come soon. I got impatient and tried cobra rotors from auto zone, they held the caliper about 3/8 inch from the adaptor bracket mounted on the spindle.

if you look at the last picture I attached, it shows the bolt that goes through the adapter bracket, into the caliper. It will hit the spindle if you try to take it out. I can get around it by putting the bolt loosely in the hole,, and then attaching the adapter bracket to the spindle. I will...

I just ordered Dr. Diff's 13 inch front brake setup for my 1967 Dart. Everything looks pretty top notch just like with his rear disc conversion. I had some questions regarding fitment: The upper bolt that holds the caliper to the caliper bracket is going to hit the part of the spindle that...

Dan, My car does not have a final top. or any evidence of ever having one. That is good info though. Speaking of my car, I should go work on it... Maybe tomorrow. John

Wait. So all 1967 Barracuda windshield gaskets are the same? Is there not any variance between fastbacks and Notchbacks or convertibles? I am looking at http://yearone.com/serverfiles/fbshopmain2.asp?input=windshield&SM=1&SC=1. will this work on a 1967 Dart Hardtop? On a different...

Just curious, why not??

Well, the car is in paint. It took my buddy a while, but looks pretty nice. Getting it back only makes everything else on the car look worse. I think getting it painted made a bunch more work for me. But none the less I am very happy. Six Years later and its like a completely different car. :D

Dropped the car off at my buddies house. Its down to bare metal now. seems to be goin smooth. Still cant find those clips. I know someone here has had to of purchased them somewhere along the road.

Thanks guys, I'm having trouble. I really want a 1000RR, But this Mopar project is starting to steal all my dough. I'm gonna have to wait. Plus that thousand will probably put me underground.

Got the harness and firewall junk out from under the hood. Dropped the car off at my buddies, Paint and Body time. He painted my bike. I attached a picture, also the Lexus Is the color I'm leaning toward, but with added blue pearl. The lighting on the bike pic doesn't show the silver and blue...

same 360 for now. Between the tko600, paint and body, Wheels and tires, and the interior. I'm already looking at too much. we'll see about later though.

Got the engine and trans out yesterday. Trans bled out a lil bit. couldnt get that driver side header out with the time I had. Time to start getting the engine bay ready for color change. still looking for the correct clips for the side trim...