Recent content by Raupleminze

That's what I am thinking, I just wanted to make sure that they are used and was hoping for pictures for proper placement.

Is there any need for the rear A12 brackets? Are you running a similar set up? If so pics?

Hey guys, I have seen a few hood pin kits offered online for the B-body A12 cars. Will those kits work for mounting a lift off six pack hood on a 1971 Demon? Is there a separate kit somewhere? I looked on the AAR Fiberglass website and saw nothing. Will the A-body also require brackets to...

Back to the top!!!!!!! Anybody know where to get the larger (thicker) engine mounts for more clearance?

Thanks for the reply! I actually have the lenses, I am just missing all of the screws to assemble everything.

Hey guys, Finally getting back to reassembling the car back together and despite taking the time to mark and bag all of the pieces for the dash they are now missing. Any idea of a vendor for reproduction dash hardware (mounting the gauge cluster to the dash, gauge face plate, etc)? Thanks, Brian

Wow! It has almost been a year and I am just getting time to try to get this solved. Anybody have any ideas? Do they make taller engine mounts? Here is a pic showing how thick the current mounts are. Also, it looks like a mouse decided to make a snack out of the wire coming out...

Fly, I am assuming that in the picture you posted that the smaller bump is for indexing to the engine bracket right? It fits inside a hole on the engine bracket right?

How thick are they supposed to be?

Post #20

Passenger side bracket and mount.

No worries, thanks for the attempt. Yeah, this is still the same manual steering we got from the donor car.

Not sure if they are correct mounts, they appeared to be correct and came with the 1970 Duster 340 parts car we had for the build.

I believe the mounts are correct, here is a pic of the driver side. I will have to get one of the passenger side. You can also see another angle of the oil pan. 9F6D5438-49C8-4FB1-8B7F-8C0CE1FF667B_zpspjhbqlqm.png Photo by raupleminze |...

It appears that there will be no clearance for it. The engine is from a 95 Ram (I assume) since it is a 95 magnum 360. I am assuming that the truck pan is still on it. I checked out the link you sent, i will have to get better pictures of the pan.