Recent content by richierichpoky

So before I even attempt to take the headlight bezels out of my 68 Barracuda (to remove some dings) I'm looking to get some tips from someone who has removed them before. As well as maybe an explanation or exploded drawing on how they attach. My car is missing several of the perimeter screws...

That's what I'm thinking is the problem. Button is not adjusted correctly. I will give it a few turns one way or the other & see what happens

Thanks Matt. I will just have to dig in to it.

I think I may need to look at shifter under the console as well. The positions on the shifter don't seem to snap into position very well.... they seem sloppy. If you know what I mean. Kind of like the button is partially depressed (is that possible??)) Maybe the notches in the shifter are worn??

I will try crawling under there again tonight

Do all of the factory console shifters have a 1st gear position?? Can they all be manually shifted into 1st?? I'm having a problem getting mine adjusted to be able to manually shift into 1st. Am I missing something here

Will do. Once back home I will do compression check, set timing, see if I can find any vacuum leaks. Continue from there

I think one major problem is the 273 intake on the 360 so that is one of the first things I need to do

After that I think a good aftermarket intake make sure it's sealed well. Maybe that will get me somewhere

This mid 70s 360 has the marks on the driver's side which puts it behind the water pump and steering pump. I just bought a bolt on tab for the passenger side. I will need to make a new mark on the damper.

Edelbrock Performer 750. I do suspect timing too. I won't know til I get a timing tab I can read. Vac leak is possible too. Vac guage is really low.

Will do

I will be doing more research when I get back from a business trip this week

It could definitely be a timing issue

I will likely have to have a small mirror if I leave pump on. It's pretty hard to see