Recent content by Son2PopsCuda

Thank you, definitely gonna look at Ebay. I appreciate that.

Hello FABO family, hope all is well first and foremost. Does anyone know the size of the socket for the upper ball joints. I assume there all the same size for all A bodies but mine is a 67 Barracuda. I purchased a kit from Amazon that included two sizes but one socket is slightly bigger than...

It’s definitely mechanical, good idea on the copper lines, I’d hate to have oil pouring into the car!!

I do have the performance gauge but it was hooked up directly to the carburetor. It never did work right but I also tried this port. It has to clogged, I’ll take this fitting out and clean it up. Thanks man

Thank you for this information, do you happen to know the thread sizes on the T fitting?

I also don’t know what this is, I had the carburetor line hooked up to for vacuum as it does idle better but I honestly don’t think it’s for that. I circled the part in the pic and the part in question is located on the backside of the manifold on the driver side very close to the distributor.

Hope all is well with everyone first and foremost. So I purchased a set of gauges, not to look cool so I’m hoping I can get them going. The gauges are the typical water temp, oil pressure and volts. The volts are by far the easiest, the water temp easily figured out (hope I didn’t speak too...

Thanks for the info man, definitely appreciate it!!

Definitely great news!!!! Now I gotta hunt one down. Thanks man

I forgot to mention that it is the 22” Radiator. Thanks again

Hey guys, I’m looking for a fan shroud for a 67 Barracuda with a 273 in it. It’s running a little warmer than usual. I’m going to flush the system and pressure test the radiator but a fan shroud can’t hurt only if I can my hands on one. Ok so here’s the deal, I don’t care about exact year and...

I since replaced the MC with a factory coded disc/drum MC. Bench bleed it, re bleed the system, pressure was felt instantly and brakes work. I’m no mechanic and don’t pretend to be but I know my way around the garage. With that being said I’m definitely getting the brakes inspected and...

Reverse lights still available?

Update, I was able to find on eBay an NOS MC for disc/drum. Also made sure that it didn’t need rebuilding being that it is NOS. Seller said that all of the rubber is checked before shipping so rebuilding wouldn’t be necessary. I installed it and the brakes work as they should. It was the MC all...

The big deal is that they sold me a MC that is supposed to be for a manual disc/drum application and it is actually a manual drum/drum application. I already had a perfectly working drum/drum manual MC and didn't need another one. The car is now set up for manual disc/drum so I need an MC to fit...