Recent content by TerraBella

Floor shifter

I need a Trans cable for my 65 Barracuda mine is a mess,and leaks oil from a burn in it from long ago, my temp fix has out lived itself. any help would be Great! Thanks

Hey Tony, do you know where i can get a replacement power steering cap for my 65 Barracuda 273/4 I think its a federal pump . any help ? Thanks Kevin

I need a cap to the power steering pump! i think mine is a federal pump on a 65 273 commando. thanks

I NEED a cap to the power steering pump do you have one, I think mine is a federal pump! Thanks

Got one at local parts store, funny how some things just are not avlb. and some are on the shelf! THANKS

I'm having some trouble with my brake lights working sometimes and not working at other times. I think I've tracked it down to the switch at the break pedal this is on a 65 Barracuda auto trans car. anyone know where to get a replacement switch?? Thanks!!

I need Striker plate from driver side of a 65 barracuda

Anyone know where to find the lower rocker Trim clips for a 1965 Formuls S these are plastic or nylon and about 1" to 1 1/2" squair any help PLEASE Thanks!!

any help please. I am rebuilding my 65 273 comando. I have some 302 heads that were rebuilt,bought off the interweb. thay looked great and i had them touched up to remove a small anmount of surface rust. at a machine shop. when we went to put it back togather the push rods were too long...

[Yes its a Comando with 4bbl QUOTE=JBurch;1970811228]You didn't say if your 273 is a standard 2 bbl, or a Commando 4 bbl. In any event, 302 heads are a great swap, a little clearance grinding needs to be done on the drivers side head, around the air injection holes, which must be plugged(...

Big Joe says the valve was burnt from the last engine rebuilder not getting all the Gunk out of the block and gunk in the cooling system not properly flushed out so he thinks it was getting HOT. I'm going to get it all clean and flushed this time for sure.

I have a cracked head on my 1965 273 comando i have a replacement head on the way. BUT I also have a set of 302 heads that i just purchased form Ebay My Question What intake are will work best, what carb/cam works with it all. any suggestions please chime in. not looking for a race car but...