Recent content by Timmy's Toy

  1. T

    [WANTED] W2 Small block exhaust rocker needed

    Rocket, I cleared my PM messages. Left you a message.
  2. T

    Rocket, I figured out how to clear my inbox.

    Rocket, I figured out how to clear my inbox.
  3. T

    [WANTED] W2 Small block exhaust rocker needed

    So I'm an idiot. I can't figure out how to delete old PM messages
  4. T

    [WANTED] W2 Small block exhaust rocker needed

    These are the rockers for W2 race heads and not the econo W2; correct?
  5. T

    [WANTED] W2 Small block exhaust rocker needed

    Does anyone have any blue Mopar or Gold Crane 1.5 exhaust rockers for W2 heads? This the offset shaft style used with aluminum rocker stands.
  6. T

    Stroker kits, Ohio Crankshaft vs Hughes Engines

    I'm looking at big inch SB stroker kits from Ohio and Hughes based on a 360 block. Ohio has a 4.1 inch crank kit that'll go 425 inches with a 4.060 overbore, (418 with a 4.030 bore). Hughes is 4.180 stroke with a 4.030 bore for 426 inches. This will be a drag race only engine in my Dart. I'm...
  7. T

    How do hydraulic flat tappet lifters fail?

    Are you using a high zinc oil?
  8. T

    Alternator mounting with Moroso electric water pump kit

    I assume it's this pulley. Only one that Moroso shows.
  9. T

    Alternator mounting with Moroso electric water pump kit

    I meant the passenger side, not the drivers! Dislexia!
  10. T

    Alternator mounting with Moroso electric water pump kit

    Guys, Thanks for all your comments! It looks like I'll figure out a mounting in the normal drivers side area. I'll use a smaller pulley as suggested and will have a cut-off switch for the alternator while racing, which should keep the belt on! Any pictures of your installations would be...
  11. T

    Alternator mounting with Moroso electric water pump kit

    Do me a favor and send me a picture of the mounting of both the alternator and water pump. I'm trying to figure out which mounts to buy, and I really don't want to spend a lot of money if possible!
  12. T

    Alternator mounting with Moroso electric water pump kit

    Anyone running an alternator with an electric Moroso belt driven water pump kit? I have a 68 Dart race car with a 360 LA motor. I've been running no alternator for 14 years of racing, charging battery between rounds with no problem. However I've decided to add an alternator to speed up...
  13. T

    W2 head installed valve spring height

    I've been toying with buying a spring tester. I'm going to know. I'm going to spend a little money and get a good one. I'm being educated. Thank you guys for your comments and help.
  14. T

    W2 head installed valve spring height

    So using your equations I come up with different answers. 124@1.80 310@1.25 186/.55 = 338 lbs. 133@1.88 354@1.28 221/.60 = 368 lbs. Am I missing something?
  15. T

    W2 head installed valve spring height

    The 120 seems too low for me as well. I'm confused about the 540lbs/in. Where is that?
See more
Back
Top