1967 Barracuda wiring harness

-
B

bluefish1967

Well-Known Member
Joined
Apr 8, 2007
Messages
129
Reaction score
50
Location
ohio
I'm looking for an engine and headlight wiring harness for my 67. No luck with Evans Wiring or Year One. Anyone know of any other sources? Have a burnt connector at the bulkhead, going to the fusible link .Any suggestions would be appreciated. Thanks. Larry
 
bluefish1967 said:
I'm looking for an engine and headlight wiring harness for my 67. No luck with Evans Wiring or Year One. Anyone know of any other sources? Have a burnt connector at the bulkhead, going to the fusible link .Any suggestions would be appreciated. Thanks. Larry
Click to expand...


Try posting the in the wanted section and you are far more likely to get some answers.
 
You can repair the harness with plastic connectors from other a-bodies and new wires. The harness likely needs all of the connectors cleaned and tightened up.
 
if you cannot fond a new one. i my be able to help you with a used one.
 
Yes its a v-8. I would be interested in a used one if it was in good condition...Larry
 
YearOne Mopar A/B/E Bodies Catalog: Restoration and Performance Parts
Building American Muscle. Backed by our unequalled "No-Sweat Return Policy."
Mopar A/B/E Bodies » Electrical » Harnesses - Eng / Fwd Light Mod For Elec Ign » A-Body » HU258AM
Reproduction harness requires the use of the 1970 and later style alternator and electromic voltage regulator. If using an aftermarket electronic ignition system, our manufacturer suggests that a reproduction harness for point ignition would be a better starting point. Use this harness for plug & play termination of a Chrysler electronic ignition system.
Part # Description Price Add to Cart
HU258AM Reproduction engine and forward light harness modified for electronic ignition for 1967 Barracuda models with all engines. $199.99
Click to expand...


call year one and see exactly what they offer. your better off with new. 40+ year old engine harnesses are just asking for trouble..
 
I agree. Year one is available, but is backordered until January or so. My experience with Year One has been if it is backordered, it takes much longer to get it than stated, if at all. Thats after you pay up front.
Evans has offered to make one for me, using mine as a template. Thats if mine is not cut, spiced or modified. I"ll have to check it out closer this weekend, including the bulkhead connector. Thanks. Larry
 
good luck with that evans garbage. mine had bad crimps all over the damn thing ( engine and the wiper harness). the 40 year old cracking and corroded wires were better then that junk.

hell its coming to the end of the season any way. you can wait. no?
 
You must log in or register to reply here.
-

Back
Top