1970dartcustom
of the Moore clan
My Dad recommended the Hurst Pro Matic 2 shifter for my build...
It looks pretty cool, anyone else recommend it?
It looks pretty cool, anyone else recommend it?
Yep, best looking one on the market.My Dad recommended the Hurst Pro Matic 2 shifter for my build...
It looks pretty cool, anyone else recommend it?
B&M pro ratchet for the win...
Had good luck ,with mine. The Cheetah's sweet,too expensive for my budget.
I like mine, but no one else knows how to use it cept for you.
It took a bit to get used to how it moves to put it in park or reverse, but now it's just second nature.
A good shot of something like graphite spray once in awhile is fairly mandatory to keep it free and smooth.
I have the Hurst Aluminum T handle instead of the ball.
Your car,is fun to drive.Had a great afternoon, Greg.��
I have one in my 67 Coronet. I am running the truck version as it has a longer handle and works great with a bench seat and almost gives a look of a 4-speed. Shifter seems to be working good now but did have its problems when I first installed. I found it very finicky to get the adjustment just right so it would go in all gears. The other problem I had and was already mentioned is the recommended cable routing calls for it to exit front of shifter through the floor then loop out front and come back to trans linkage. The problem with that is if you have headers it will melt the cable no matter how much you tie it back or wrap the cable. Ask me how I know:banghead:
I purchased another cable and routed it from the front but around the transmission case on the passenger side and then back across the front of the transmission pan and then into the transmission linkage. No problems since and I even wrapped it with some heat sleeving just to make sure. Its real tight though when you route this way but seems to work. Could use another cable that is about 2-3" longer.
Will try and post a couple pics later.
My Dad recommended the Hurst Pro Matic 2 shifter for my build...
It looks pretty cool, anyone else recommend it?
comes with a theft deterrent too, No ones going to figure this pattern out in 60 seconds...
I put it under my console I like the look .....