[Found!] 7 1/4" Rear Axle Assembly For 1969 Valiant

-
Status
Not open for further replies.
Want to travel ? Bring 500 and a trailer to Easley SC. Haul this 68 notch away. We'll poke a complete, excellent ( currently in use ) SBP 7.25 under it before it leaves. Plan to work hard all weekend moving parts around.
 
Two available - 64 and 68 valiants. None scaled housings, clean metal. Will strap to pallet for free - Need $25 to deliver to El Paso truck dock. $100 per rear end.

100_4362.JPG
 
I have(4) 7 1/4 rearends as well as plenty other parts in Houston Texas pm me.
 
You can have the one out of my 68 B'cuda if you come remove it. The car is in the garage, and all the tools you need are here as well. You just can't take the tools home with you. I'm 10 min south of Baltimore.....
 
1969_Valiant said:
Looking for an entire 7 1/4" rear axle assembly in good shape that will fit in a 1969 Plymouth Valiant. Message me if you know of one. Thanks.
Click to expand...



Have one from 69 barracuda V8 with 10 inch drums and backing plates already out of car. FREE come get it !!! Thats right, Its FREE. Even has the parking brake cables. tired of tripping over it. Never been apart. Free to you or any body that wants it. Come take it away!!!.
 
Last edited:
I've got a 7-1/4 sure grip with 3.90 gears if you're still looking. I'm in Northern VA so we're not too far away.
 
Has anybody heard from the OP? We have given him quite a few offers and some of us have pm'd him.... any responses? Are you still looking?
 
I have one from a 67 barracuda. You can have it. Come pick it up. I live in white deer PA. Just below Williamsport
 
I gave the OP one for free. He picked it up last week. Maybe I could have got something for it but I just wanted it out of the shed and wanted to see it put to good use.
 
rich006 said:
I gave the OP one for free. He picked it up last week. Maybe I could have got something for it but I just wanted it out of the shed and wanted to see it put to good use.
Click to expand...

I wanted to thank everyone for all of the help and offers. I just had everything installed. As rich006 said, he hooked me up in a major way. I was able to drive to his place, grab it and have my friend's shop install it with no problems, for very little money. If it wasn't for this site, rich006 and my friends at the shop, there is no way that I could have my car running right now. If it was a regular shop that got the part for me and had it installed, it would have been more than the car is worth and I'd probably have to scrap it. It's my grandmother's car which was then passed down to my brother and I now own it. It's been a little bit of a battle getting it running right and legal, but I am continuing the project. It's my daily driver and I am putting about 9000 miles on it annually. It still needs a ton of work, but I will never sell it. Either it totally dies, I totally die or we die together. Thanks again for all of the replies. I wish you and all of your abodies well.
 
And btw........not only did he hook me up, but he is a totally cool and trustworthy guy. Don't hesitate to work with him. 5 star rating, without a doubt!! Thanks again everyone.
 
1969_Valiant said:
Looking for an entire 7 1/4" rear axle assembly in good shape that will fit in a 1969 Plymouth Valiant. Message me if you know of one. Thanks.
Click to expand...
I have the whole assembly out of a 63 Valiant if it will work 2.93 gear,Also have a nos ring gear and pinion never used 3.90 gear....
 
Status
Not open for further replies.
-

Back
Top