Ford 9inch to 727 driveshaft

-
dukeboy440

dukeboy440

FABO Gold Member
FABO Gold Member
Joined
Jan 19, 2007
Messages
56,973
Reaction score
34,146
Location
No
For those that have converted to a Ford 9 inch, while running a 727. What U joint are you using or is there in adapter style one that will let you use the 727 shaft and bolt to the 9 In pinion yoke?
 
Denny's Driveshaft has any of the combination u-joints that you might need. The Ford 9 yoke most likely is a 1330 or 1310, to your 7260 or 7290 driveshaft.
 
DrEamer said:
Denny's Driveshaft has any of the combination u-joints that you might need. The Ford 9 yoke most likely is a 1330 or 1310, to your 7260 or 7290 driveshaft.
Click to expand...
Thanks
 
Since you will probably need to have your shaft length changed. Have a Ford end on the rear and a Mopar on the front. No need for odd ball conversion joints.
 
Something you need to BE CAREFUL of with Ford rear ends is the so called "big cap" U joint. That damn near entrapped me. There is very little difference in cap diameter

This page here. There is only 1/16 difference

U-Joint series identification

Big%20Cap%20yokes%20copy.jpg
 
You must log in or register to reply here.
-

Back
Top