[SOLD] DC P3614466 cam

-
Status
Not open for further replies.
1

1966Post

Well-Known Member
Joined
Mar 8, 2015
Messages
438
Reaction score
262
Location
Wisconsin
Rating - 100%
12   0   0
Contact seller
Vintage DC cam part# P3614466 appears to be a very high lift solid or maybe roller cam
New had some flash rust on one main journal but polished out well
I got this years ago with some speed parts from old max wedge racers estate
I cant find the specs on the web but know there are many members here that probably will provide the details my simple dial caliper method shows about a .590+ lift with a 1.5 rocker ratio little too big for my needs
$60 shipped to lower 48 Just would like to see a true blue Mopar member use it

Thanks FABO
IMG_1603.JPG
 
Where are you in WI? I'd be interested if I can find specs on it, but so far google came up with nothing.
If you are close, I could borrow or rent it and put it in my lathe with a degree wheel and come up with some specs on it. I'm looking for something with similar lift, but it needs to have streetable duration. Shoot me a PM if you'd prefer.
 
gzig5 said:
Where are you in WI? I'd be interested if I can find specs on it, but so far google came up with nothing.
If you are close, I could borrow or rent it and put it in my lathe with a degree wheel and come up with some specs on it. I'm looking for something with similar lift, but it needs to have streetable duration. Shoot me a PM if you'd prefer.
Click to expand...
PM sent gzig5
 
13 years ago there were dozens of post here on FABO with guys trying to come up with the specs and no one ever produced them. My guess is no one will this time either. Only way to know at this point is to install it and use a degree wheel on it. I do know from all the reading that it is in fact an LA small block cam.

Tom
 
You might send it to Ken at Oregon cam grinding and have him tell you what it is and if you don't like it pay another $80 and make it into what you want...
 
Status
Not open for further replies.
-

Back
Top