j par
Well-hung Member
Speedmaster sale is on up to 40%...
What do you recommend. Bare, assembled? If bare, what valves, etc.Speedmaster sale is on up to 40%...
What do you recommend. Bare, assembled? If bare, what valves, etc.
it really depends on what you're putting them on and what your expectations are. I bought complete heads and ran them basically out of the box. I paid $95 to have them looked at and they were pretty close to the specs I had already on my well done Factory heads. The only thing they had to do is just free lubricate the valve guides... So far they've ran flawless on my Stroker with a dual quad tunnel ram..What do you recommend. Bare, assembled? If bare, what valves, etc.
Their information is the best sometimes..Ok stupid question...why do they all say hyd? What about solid?
Thanks Jpar.
Yeah before I but mine last year I called Don's over there on Stark and they said at least $800 to rebuild them as everything was wrong with them. The valve guides the seats all had to be replaced everything. They said $800...Every builder I've talked too about these heads is buy them bare and use quality hardware. That goes for all of their heads be it Mopar, Ford and that other company. I bought mine bare and had them set up for my cam and build.
Maybe they are using better hardware now so it may be worth buying assembled.
They always do free shipping anything over $100..Apparently they're doing free shipping too.
it really depends on what you're putting them on and what your expectations are. I bought complete heads and ran them basically out of the box. I paid $95 to have them looked at and they were pretty close to the specs I had already on my well done Factory heads. The only thing they had to do is just free lubricate the valve guides... So far they've ran flawless on my Stroker with a dual quad tunnel ram..
Speedmaster sale is on up to 40%...
I'm pretty sure they doSorry I have a stupid question they say pushrod oiling but do they have internal oil passages In them to run them on an older Pre-magnum block
I just got the non cnc'd heads...Did you get the complete CNC 190 heads or the 170 heads? Since I'm asking questions, maybe 50-60hp increase?
I know right! LOL it's for two heads..Are these prices for 1 head or a pair of heads ? I am looking at the cnc pair bare ?