CORRECT pedal for 2bbl conversion

-
petty437

petty437

FABO Gold Member
FABO Gold Member
Joined
Feb 5, 2014
Messages
428
Reaction score
308
Location
Kent, Ohio
Does anyone have a picture of the correct gas pedal assembly for the 2bbl (super six) conversion for an early (63) A? I want to use the floor mount pedal assy that just bolts in the original location just by drilling out the dimples already stamped in the floor. Thanks in advance! Tim

Cross posted in the Slant 6 forum also.
 
I’m thinking you might use the 64-66 V8 or 65/66 slant with factory AC bracket and floor mounted pedal for a 2 barrel conversion.

3DCAF5C7-33F5-410E-A411-282A41E84F99.jpeg



DEA446B8-8054-4143-B089-4AFE897B3FFF.jpeg
 
They may have moved the bulkhead connector in 64 to accommodate the cable throttle assy So you may want to look at some photo's of a 63 firewall compared to a 64-66
 
petty437 said:
Does anyone have a picture of the correct gas pedal assembly for the 2bbl (super six) conversion for an early (63) A? I want to use the floor mount pedal assy that just bolts in the original location just by drilling out the dimples already stamped in the floor. Thanks in advance! Tim

Cross posted in the Slant 6 forum also.
Click to expand...

As explained here:
1963 Dart swap to cable throttle?
you cannot directly bolt a 64-66 V8 firewall cable throttle bracket to a 63 firewall. However, you can rig up something that looks like a factory V8 setup and uses the V8 accelerator pedal.
 
You must log in or register to reply here.
-

Back
Top