Search results for query: *

  1. Inertia

    hi guys 416 - 318 poly swap 56 Savoy

    I stuffed a b/block into one, had to notch fr x-member for oil pump/filter. Seems to me there's a ton of room in there, usual steering box issues. I used fender well exit headers, don't remember brand . Good luck with build . !
  2. Inertia

    Kevco / Dipstick Issue

    Try putting a slight bend in the last inch of the dipstick, so if it's just hitting the windage tray, the bend may guide it past. Try both ways.
  3. Inertia

    Turbo Magnum Swapped Valiant

    That is waaaayy cool.. good job,, looking forward to more..
  4. Inertia

    Mounted the factory fuel pump

    Nice job on the conversion... When I weld a used tank, - with the sender out,, , wash it out,, then run an exhaust hose off a healthy running vehicle into the filler opening,, let it run for quite a few mins,, I used to tape an torch to a long pole and pass it over the sender hole,, but after...
  5. Inertia

    A904 Cooler lines with 5.9 Magnum- like a demented puzzle?

    I've installed/replaced a few cooler lines in the car with/without headers.. It takes time and patience,, and sometimes you need to straighten them a bit to get them in,, but it can be done, (I'll never do stainless again).. I usually push them forward from the bellhousing.. hope it helps
  6. Inertia

    magnum bore wear???

    We've come a long way, in the 50's/60's/ it was common to need a valve grind at 60,000 mi.,,, and re-ring or overhaul @ 100 - 120,000 mi.s, now seldom hear of an overhaul.. not uncommon for engines to go 300k.. if reg maint. is done...
  7. Inertia

    Mopar Magnum

    Yeah,, I just got a set of TTI's for a friend,, polished ceramic,, very very nice.. He took them home to hang on his wall till we install them .. lol
  8. Inertia

    Mopar Magnum

    This is where that "search" button would be handy,.. in the exhaust section and check out some "speed shops" in your area,, for a reference to a good local muffler shop, would be a good idea.. hope it helps.. cheers
  9. Inertia

    Mopar Magnum

    Welcome to the site,, you'll find lots of knowledgeable, helpful folks here.. That's a very, very nice car ,, more pix pls.. and that 360 will be fine, as is, or as a base, ..... thnx for sharing,, keep us posted, cheers PS.. if you go to the forums page,, and choose a title. say "small...