Search results for query: *

  1. Nico383

    650cfm QFT Carb Tuning / 383 / 727

    Hi guys, I did some tests, went from 62 to 64 on primary jets, from 42 to 37 on primary pump nozzle and changed from pink to green cam. Results are much better! I even gave it a go with the blue cam that I think I will stick with. Going from 0 to WOT as never been that fluent since I own the...
  2. Nico383

    650cfm QFT Carb Tuning / 383 / 727

    Hi Mattax, Many thanks for this great answer. I may not be that far from a good solution. I think that without knowing I've been trying to compensate a lean condition setting bigger pump nozzle whereas it may come from the pump shot cam. I'm going to go from 62 to 64 on primary jets and try to...
  3. Nico383

    650cfm QFT Carb Tuning / 383 / 727

    Hi Gents, I am looking for a set up for my QFT 650cfm double pumper carb as I can't find help over here in France. I would need a configuration of jets, squirters and power valve as a basis I could adjust afterward. I did some tests but I get lost with my AFR readings. When the carb was stock...
  4. Nico383

    European A-body owners: where are you?

    Hi Guys, Nico from France here! I own a 1970 Plymouth Duster with a 383 and 727 trans! By the way I'm looking for a decent pair of door panels and a driver fender (engine bay part), if you have that please let me know!!! Cheers!
  5. Nico383

    [WANTED] Duster 70 Low door Hinge, driver fender inner part, Door pannels

    Hi Gents, I'm looking for : -A low door hinge (only the outer part) of this type (with rollers) : -The inner part of a driver fender (the part that comes back in the engine bay). I will have it welded here in France so I don't have to get a full fender shipped. -Door pannels in good shape...
  6. Nico383

    [WANTED] Bay engine part of driver fender Plym Duster 70

    Sounds good to me! Can you send some pictures to this address : [email protected] When you will cut it, can you please keep in mind it will have to be welded to my fender, we need to keep a margin so the the welder will be able to melt both sides together... Cheers! Nico
  7. Nico383

    [WANTED] Bay engine part of driver fender Plym Duster 70

    And by the way, I'm looking for door panels in good shape as I need to replace mines...
  8. Nico383

    [WANTED] Bay engine part of driver fender Plym Duster 70

    Hi guys, I'm looking for the inner part of a driver side fender. I can't buy a full fender as it would be costly to get it sent to France where I live. This way I could rework my actual fender to have something clean before painting. Car is a 1970 Plymouth Duster Cheers! Nico
  9. Nico383

    Door end seal, pillar seals and lock seals...

    By the way, here is the list of the part I bought prior to sending my car to painting... If you see that, apart from "door end seals" and "pillar seals", some parts are missing, feel free to give your input!
  10. Nico383

    Door end seal, pillar seals and lock seals...

    Hi Gents, Pretty hard for me to make the difference between these seals... I'm I right saying that "Pillar seals", "U-jamb" and "lock seal" reffers to the same part? YearOne don't have these seals for my application (1970 plymouth duster) they say. Do you know if I'm supposed to have those on...
  11. Nico383

    Full door and windows"rebuild" kit for 1970 Duster

    Hi Gents, I need your help as I plan to send my 1970 Duster to painting this winter and I would like to change all the seals and gaskets around side windows and doors (the windshield one has been changed recently). The thing is I miss some vocabulary to look for each part. Do you know if some...
  12. Nico383

    Front tire clearance : what rim / BS on a 1970 Duster?

    All right! Thanks for the info. And if I order a pair of 15*7 rims with 4.25" backspace, will I be able to stick my 225/60/15 tires on them?
  13. Nico383

    Front tire clearance : what rim / BS on a 1970 Duster?

    Car is a 1970 Duster with a 383, 1" torsion bars and pst sway bar. Hi, The rim I run on the duster have been given to me by a friend, they were on a 1971 Cuda before and guess what, I have a clearance issue with the front wheels hitting the rear part of the wheel well. I had a look to whats...
  14. Nico383

    Main jet tuning... ...in France

    Ok... And what's the process I should follow using the AFR gauge to find the good PV?
  15. Nico383

    Main jet tuning... ...in France

    I did some tests with a 4.5 PV I found. First feeling : I get "holes" in acceleration when applying load so I guess 4.5 is too small. Keeping the 60 main jets I get an AFR around 15.6 when cruising at 3000rpm in 3rd gear. with 68 main jets I get an AFR around 12.0 when cruising at 3000rpm in...
  16. Nico383

    Main jet tuning... ...in France

    Hi Yellow rose, thank you for your help :) I'll let you know as soon as I'm sure I need them. @AJ : I checked the vacuum at idle, transmission in D : it's between 12 and 13 with vacuum advance plugged in. I guess I should keep the 6.5 PV? Nico
  17. Nico383

    Main jet tuning... ...in France

    Ok, well, I'm going to check the vacuum pressure at idle in drive and I will first change the PV accordingly. I keep you in touch.
  18. Nico383

    Main jet tuning... ...in France

    ...for the interest and sorry for the lack of information. Engine is a 383 with a 650 cfm double pumper carburator. Camshaft exhaust duration is 228*, and intake is 223* but I don't really know what does it involves.. Here are the camshaft spec ...
  19. Nico383

    Main jet tuning... ...in France

    I need jets between 60 and 64...
  20. Nico383

    Main jet tuning... ...in France

    Hi Guys, I'm now dealing with the carburation tuning on my 1970 Plymouth duster. I first ordered a full set of main jets from quick fuel ($94) but it turned out I need smaller primary jets than the 68 stock ones (kit range is 75 to 110) so I ordered 57, 58, 59 and 60 (regarding the AFR gauge...
  21. Nico383

    Tires and wheel combo Duster 1970

    Bolt pattern is 5 x 4.5 (I changed my hubs and drivetrain shafts)
  22. Nico383

    Tires and wheel combo Duster 1970

    Ok. I think I found a type of rim that could fit. Could you tell me what you think about it? Should it be ok? Front : https://www.summitracing.com/int/parts/brw-941571242/overview/ Rear : https://www.summitracing.com/int/parts/brw-941511240/overview/
  23. Nico383

    Tires and wheel combo Duster 1970

    All right... would a 1-1/4 spacer make the deal?
  24. Nico383

    Tires and wheel combo Duster 1970

    Hi gents, I'm running 15 inches wheels at the front and rear of my car (aero race wheels). I had this front wheels from a friend that had an accident and I know this wheels are not perfectly round. With 225mm wide tires, I don't have clearance enough : the tire hits the fender. It makes two...
  25. Nico383

    Battery ground wire and hot wire section

    Well, to be fair that's what I was thinking about, but if it's better to have two wires of the same size, I guess I'll go for a bigger one. Update on some tests I did with a big /00 positive wire and a smaller section negative one : when car is warm she struggles to start, I can see a huge...
  26. Nico383

    Battery ground wire and hot wire section

    Hi, First I bought a complete kit with too small section wires.So I just bought a new bigger /00 red wire and I wonder if I have to do the same with my negative wire. But I guess I have the answer now ;)
  27. Nico383

    Battery ground wire and hot wire section

    Ahah I will pour some Bordeaux as soon as I'll be able to go to a wine shop with my beloved Duster ;)
  28. Nico383

    Battery ground wire and hot wire section

    Hi guys, Thank you for your replies. The kit I bought came with a 2 gage red wire and a 3 gage black wire both 14 feet long. I had difficulties trying to crank up the engine and wires were hot so I guess I have to replace them. I will go for a 2 times bigger red wire but I wonder if I have to...
Back
Top