Search results for query: *

This is the ultimate upgrade for leaf spring equipped vehicles looking for extra tire clearance as well as lateral stability. This is the only kit on the market that has delrin bushings and our exclusive A body specific bolt in slider assembly. Free shipping to the lower 48...

Looking for Keyway style, Saginaw power steering pump pullies. Small Block Only PM with pics. Thanks FABO

Pair of Eaton 6 leaf 340 stock height springs. Good used condition. Comes with delrin eye bushings and bronze lined shackle bushings. $300 Shipped to the lower 48. Buyer pays PayPal fee. PM with questions.

Hey everyone. We just finished up our offset spring hanger kit with the first every, bolt in slider assembly. This is similar in offset of prior discontinued Direct Connection kit that moves the spring inboard .5" even with the inner wheelhouse. I have run 275 tires on a 18x9 rim with this...

Looking for bare front clip. Only need inner structure. No K or body panels needed. Any A body 67 and up. Must be reasonable distance from 28443. PM me with what you have.

Does anyone have the correct part # for a 1969 4 groove BB crankshaft pulley?

I'm looking for a power steering pump pulley with a keyed shaft (not press on) from 69 and earlier small block engines with the cast iron water pump. Also looking for a 2 groove crank pulley for the same engine. I believe 318 polys had these same pullies. PM WITH PICS AND PRICE. No scammers!

Want pre 67 solid style steering shaft or column for power steering. PM with what you havve.

As the title says. The cast iron water pump small blocks (up to 69) are not the same as later 70 and LA small blocks. I'm looking for a 3 groove crank pulley for an AC small block. PM me with what you have.

Can anyone verify the accuracy of new stock replacement level senders?

Looking for Drum Brake Backing Plates 11x2.5 for 8.75". Must be useable, not super rusty PM me with anything you may have

Looking for an alternator bracket with AC (if it makes a difference) for a '65 273. I believe this is the one with the hole in it for the dipstick. PM me if you have anything. Thanks FABO!

I'm looking for the metal interior gas pedal. I don' necessarily need the plastic pedal. PM if you have, hopefully with a pic.

Looking for black rear seat upholstery, 71 Dart. Legendary is a ways out. Maybe someone has one that changed their mind. PM if you have anything.

Almost new Powermaster dual groove, square back, 90 amp 1 wire alternator. Works perfectly. $150 shipped to the continental 48. PayPal to Bergmanautocraft@aol.com. Ships immediately with UPS tracking.

1968 “742” case diff with Eaton Tru Trac installed. 1350 yoke. Installed new bearings and seal when I did the diff install. Case and gears came from a low mileage C body. Gears are quiet and smooth. Great gear (2.94) for those applications that like driving in other lanes beside the right…...

Looking for Saginaw type power steering pump/brackets/pullies for slant 6. Saginaws were typically in 73 and up cars.

Looking for section of frame rail and upper control arm mount. This can be either side. Hopefully in the eastern NC area. PM me if you have something. This can come from any 2 or 4 door 68-76. A body.

Enjoy 10% off our popular lower control arm pivot package. Do it once and do it right!

Enjoy 10% off our popular lower control arm pivot and delrin bushing package. Do it once and do it right!

Brand new Dr Diff 3.55 gear set. 10 spline for 742. 200 shipped inside the continental us. PayPal via f and f or pay the 3%. Shipped UPS immediately. PM if interested.

Does anyone have first hand experience with roof rail weatherstripping on a 67-72 Dart? I installed Steele Rubber products parts and the fit the body fine. The issue is the section that accepts the quarter glass is slightly too narrow. The glass cannot be rolled up without snagging the outer...

Looking for pulley only or complete pump with pulley from any cast iron water pump 273/318/340. Must be Saginaw style pump (pressure line in the back) PM me with anything you may have.

WTB power steering shaft from any 63-66 A body. Measures 36.25" give or take. PM me with anything you may have.

Those using a Pro Flow 4, did you require a drop base to clear the hood? I've been using a 70-71 stock 340 unit, but looking for a little more air flow.

A body Mopar 4 Speed Package: Brewers built 23 Spline, Cast Iron Case, 3.09 1st, 1:1 4th, 4.35 Bearing Retainer Passon Rebuilt Hurst Shifter, Linkage and Operating Levers. Used 23 Spline McCloud Dual Disc Clutch and Throwout Bearing Trans is excellent along with shifter and rods. Clutch...

Set of stock strut rods. Straight, phosphate coated. Comes with Moog bushing set in excellent condition. $75 shipped to the lower 48. First one to PayPal to: Bergmanautocraft@aol.com ***Add 3% if friends and family isn’t an option*** Ships immediately

Set of 11/16” tie rods. Assembled, Moog toe rod ends and QA1 sleeves. Joints are tight. $80 shipped to the lower 48 First one to PayPal to:  Bergmanautocraft@aol.com ***Add 3% if friends and family isn’t an option*** Ships immediately

A body QA1 lower arms. Excellent condition $325 shipped to the lower 48. PayPal to Bergmanautocraft@aol.com

Large joint A body upper arms. Excellent condition. 275.00 shipped to the lower 48. PayPal to bergmanautocraft@aol.com