Search results for query: *

Here is a pair of sport mirrors or Rallye mirrors from a Duster. The driver side is remote. Both body gaskets are included. You’d need to get a replacement glass for the driver side. It’s scrapped up and cracked. The chrome has pitting on both. Making these good candidates to strip and paint...

Decent factory shifter from a 1972 340 Duster. The mechanism moves freely. The handle is okay for a driver but I’d suggest having it rechromed for a nice car. Comes as pictured with factory shift ball. $275 free shipping in the US

This is a really clean southwest car. Been in California and Arizona it’s whole life. I was going to make a winter driver out of it, but I have another car that is almost finished I need to concentrate on. This is a factory 318, 727 auto, power steering, manual drum brakes and 8 3/4 rear end...

I have 2 wheels here. One Dodge and one Plymouth. Both have cracks and blemishes on the rim. Some peppering on the spokes too. The center caps are good. Both have horn buttons too. $200 each + shipping from Phoenix.

This is for 1970 up small blocks. No rot and no damage at all. Comes as pictured. Unless you don’t want the old fuel pump. I can take it off and chuck it. $80 free shipping in the US

Here is an old CH4B I used a little bit ago on a 440. One of the outside carb stud holes is buggered up/broke out. Could be fixed but I never bothered. I just used the inner carb stud holes which are fine. Most carb bases have the dual pattern anyway. $200 free shipping in the US

Here is a beautiful survivor truck. It only has 112k original miles and looks like it! No rust Arizona truck. It is powered by a 5.9 liter 360 V8 and automatic overdrive transmission. Both work flawlessly! Tires are in good shape and are not very old. They are heavy duty All Terrains. The...

Nice set of pedals from a 70 Duster. Will work in all 1967-1976 A bodies. $200 + shipping from Phoenix.

Only Need a passenger side headlight bezel. Will buy a pair if necessary. 69-72 Valiant will work too. Thanks!

This is in very nice condition. Came from a dry climate so no rust issues or pits. No dents or Frankenstein mods either. Just a clean housing ready for a new coat of black wrinkle paint and a pie tin. $250 plus shipping from Phoenix

This is a good parts car or an ambitious driver project. First off, it runs and drives. However, the engine has a healthy knock. 318, 904, 8 3/4 rear. Manual drum brakes, power steering non AC. The body still has the original paint. Some minor dings here and there. It has rust in the lower...

Here is a really nice pair of front fenders for a 1970 or 1971 Plymouth Duster, Valiant or Scamp. Absolutely no rot or rust damage. No bondo worms on the back side either. One small dent on the top edge on the driver side fender (pictured). $200 each No shipping but pick up is welcomed in...

I’m looking for a 1964 valve body from a push button 904 trans. I’m working on a 1964 car that has a 1965 cable shift trans and the shift pattern is different and doesn’t line up with the push button shifter. So if anyone has a valve body and possibly cables too, I’m interested. Or a whole...

These came off a 71 Swinger parts car. They are in good condition but will need the rubber seals replaced. These can fall off and get lost pretty easily because the rubber that hold them onto the glass shrinks and fails. Think that they’ll fit 67-76? hard top Swinger body only. $45 shipped to...

Here is a complete trunk light harness for pretty much any A body. Not 100% sure on the 66 and earlier cars. This plugs into your existing tail light harness so no cutting required. Comes with switch and light socket. $30 shipped to you in the US

Came from a 1971 Swinger parts car so I don’t know if it works. Missing one knob. Dial moves side to side. Speaker wire end was cut and additional aftermarket wire was added. $40 shipped to you in the US

These are from a 1971 Swinger. They are the same for 1970 and I think they’ll work in earlier cars too. They are dark green in color and are in decent shape. I haven’t washed them or detailed them so they can only look better. $40 free shipping in the US

Complete pair of tail lights from a 1974 Sport. They are in decent shape. The passenger side is really nice. Driver side has a nick on the outside edge of the bezel. The outside lens also has a few scratches that could be cleaned up. They will look real good on a clean driver car. All mounting...

Here is a pretty rare intake. These are an awesome upgrade on a 340 or any small block for that matter! This one is in good condition with no port work done to it. All 4 outer carburetor stud holes are helicoiled. It is ready to run as is. $350 shipped and insured from Phoenix.

I have 2 early wood grain wheels. These were off mid 60s cars. The one with the horn pad is from a 66 Charger. The other is from a 65 Dart. The complete wheel has many cracks at about 3 and 9 o’clock on the back side. The inserts on the spokes have some pits, good spokes. The other wheel has a...

I’m looking for a 1964 valve body from a push button 904 trans. I’m working on a 1964 car that has a 1965 cable shift trans and the shift pattern is different and doesn’t line up with the push button shifter. So if anyone has a valve body and possibly cables too, I’m interested. Or a whole...

Here are a few hot wheels I have duplicates of. I’ve been going through my collection so there are probably more to come. Anyway, take the whole lot. $40 shipped to you in the US.

So to start off, this car is pretty rough. Looks okay from about 20 feet but you start looking close and….well, you see the bad stuff. Long ago it had a 69 passenger quarter brazed on, pass side door striker mangled, 69 passenger door which is good, driver side quarter is bondoed from the wheel...

Here is a rare intake. These are an awesome upgrade on a 340! This one is in good condition but has some erosion on the coolant passages. Nothing horrible or anything that would cause a leak. And all 4 carb stud holes are helicoiled. It is ready to run as is. $300 + shipping from Phoenix.

Here is a small block RPM intake. Only issue is someone hogged out the mounting bolt holes for some reason. No other modifications. Clean intake in natural aluminum, not coated. $250 + shipping from Phoenix.

Tried the B body site but no one there is of any help. If you don’t have a Hemi or a six pack car, don’t waste their time. I just got a decent 67 Belvedere I four door to use as a driver. Need a few things to make it nicer. Hopefully someone here has something. -outer door handles all 4 not...

Just looking for an inexpensive 4 barrel intake for a 1967 318 engine. No single plane intakes please. Performer, Weiand, Offy, whatever. I’d even take an iron 340 intake with a square bore. Please let me know if you have one and how much you want for it. Thanks

Here is a manly mans truck. It’s a 3/4 ton long bed Adventurer Sport W200 Power Wagon. It has a factory 400 big block with a 4 speed transmission, Dana 60 rear and Dana 44 front, factory AC and Factory bucket seats with fold down arm rest/buddy seat. Also has a working CB radio and a gun rack in...

In great condition. Could use a good scrubbing to look really nice! Great street intake even being a single plane. No corrosion or modified ports. $175 shipped

Taken out of a 1971 Swinger. Has cracks around the rim. The spokes look nice, however they have been painted. The little horn button is there but the horn wire needs work and the center cap looks mint! Would look great on a driver. $240 shipped in the US!