Search results for query: *

I have a complete 4 speed overdrive set up. Everything is brand new and has not been installed other than the pedal assembly. Everything you need to complete this swap is here. Prices to buy new. Passon hemi overdrive 18 spline - $3695 Passon restored pedal assembly - $439 Shifter, shifter...

72 Dart - 440 big block - stock steel crank and rods - forged speed pro pistons - edelbrock rpm heads and intake - ARP main studs - head studs and rod bolts -fresh motor. Gerst rack and pinion front end - Gerst triangulated 4 link rear suspension with Dana 60 - Borg Warner s475-t6 1.32ar with...

I just rewired my whole car with an ez wire harness. The blinkers worked fine before the wiring. I have it wired exactly to the diagram provided. I even snipped the hazard wire and I'm still getting hazzards no matter if I put on the signal left or right. The only thing that has changed is I...

Car was running great but it got a little hot the other day, around 230 degrees. Once it got hot i think it was vapor locking because it didn't want to start back up. I had to hold the pedal to the floor to get it to start and it stumbled and missed and then ran fine once it was started. Looks...

I know it's a long shot but would anyone have dimensions of the oil pan where it mounts to the engine? I don't have a stock pan to measure and don't want to take mine off right now. Wanting to make my own road race style pan vs paying $450 for the milidon. I currently have the milidon deep sump...

Came on the car, I'm not going to use it. I am not sure if it's an original or aftermarket, no markings that i could see on it. $150. Located in coopersville michigan.

I hate to be that guy but I'm picking up a dart this weekend and I'm just wondering what you guys think the hp range would be on the set up it has currently. 440 stock stroke 10:1 compression 93 pump gas Edelbrock rpm heads un-ported Edelbrock victor single plane Hughes whiplash cam-.518 lift...

05 5.7 hemi, bullseye 75mm turbo with t4 housing, turbo smart wastegate and blow off valve. Hot and cold side piping for a body dodge. System does require trimming and fitting of the bumper brackets, grill and blinkers. Engine is fresh with new rings gapped for boost @ .028, all new main...

Need covers, one has the sliding seat adjuster, one does not. I have some aluminum mounting brackets for them, they are just generic brackets. Not looking to ship. Located in grand rapids michigan. $250 obo

Just the plate, no studs or spacers. $60 shipped! Located in Grand Rapids MI

1100 cfm, was built in October for 493 stroker 93 pump gas motor 700-800hp. Still in the box, never even bolted on. Paid $1080, $800 shipped!

Never been ran, was bolted to motor and ports were opened up to match heads. 4500 flange, paid $410 new, $250 shipped.

I am picking up an 05 5.7 this Saturday with 120,000 miles on it. My plan is to ring it, put new bearings in it and put a cam in it. I would like to get as close to 500hp as possible. Whats it take to get there? I will be adding TTI's headers as well and make up my own cold air intake. I...

Was used for mock up, never ran. $460 new, $350 shipped. Located in Grand Rapids MI.

Brand new in the box, $650 shipped. See link for details. https://m.summitracing.com/parts/mil-21185

I'm looking at putting a 6.4 in my 69 dart, it's an srt motor with all the stock wiring harness and ecu. I know I'm going to need headers and an oil pan, I plan to run a th400 with a small block 727 bell housing. Besides a tune and probably a programmer, what else will I need? I'm just getting...

72 440 block, all machine work done by muscle motors in Lansing, Eagle Steel crank, Eagle h beam rods, diamond pistons, 493 stroker, indy ez440 heads with cnc ported intake side, exhuast side hand ported (gasket matched), stainless valves, comp solid roller lifters/1.5 rockers, lunati voodoo...

Would anyone be interested in a nicer round tubular version of the QA1 stock replacement k member? I have built and fixtured one up. I don't have time to do this and have them in stock to ship. My thoughts are doing a few at a time and offering them up at a similar price point as the QA1...

Everything in the picture, $75 shipped obo.

Great shape, bushings need replaced $75 shipped

Coil overs and adapters from magnum force, eliminates the torsion bars on a body cars. Paid $650, only used for mock up. Scratches and scuffs on springs.

PST sway bar for 67-72 has the end links and mounting brackets, measures 1.155" on my calipers, **pending payment** 64-76 Lower control arms, need rebuilt other than that in good condition, $50+shipping 73 and up disc brake spindles good shape, I do not have calipers, **SOLD** Steering link/...

Great condition, solid, $150+shipping obo

Great shape, no dents or dings, scoop is in good shape, no cracks, molding is nice hard to get good pics as its hanging from my ceiling. $250, not looking to ship, located in Grand Rapids, MI. Will drive up to an hour to meet for pickup.

Has been cut and gusseted, motor mounts were cut off so only for use with motor plate. Just needs paint or powder coat. $125 + shipping.

Uses 67-72 sway bar, all chrome moly self lubricating Teflon injected heim joints, viking double adjustable coil overs, bolt on and weld on rear brace, cnc pivot shafts 2015-11-08 13.43.47.jpg Photo by junior636_bucket | Photobucket

Help Bob win this contest and get a mopar on the cover, voting takes literally 5 seconds no signing up. Bob is a helpful guy and answered some of my questions during my build, help him out! http://rpm-mag.com/2015-rpm-magazine-top-gun-shootout-round-2/

Just looking for ideas for a big block in an a-body.

I had removed my windshield and rear window in my 69 dart to put a roll cage in. Whats the best avenue to put them back in? If I call an auto glass place will they know what to do with an old car like this? Is this something a guy can do on his own and save some $?

Just thought i'd share my build of the lca's that I've been working on. My idea for these was to not have to modify the k member but have a tubular control arm. I was hoping to retain the factory strut bar too but I'm going to have to build adjustable strut bars for these. I'm only about half...