Search results for query: *

Hello everyone, fortrucksonly sent me over with my question. I have a 1981 stepside with a slant six. I want to remove all the lean burn wiring and there telling me i have to change the distributer, what all is involved with this swap and is there anything that might be a problem? I feel...

I have a 72 duster originally a 318 automatic. i never had any of the drive train when i bought this shell. I'm starting to put parts together to get the ol girl running again. Here's the question, i have a 318 for motor but will a 727 fit behind it and fit up into the car without modifying...

complete 273 engine, less carb. It ran when pulled two years ago. Was in a 1965 dodge coronet. I bought it for parts and went in another direction. 250.00. Let me know, thanks, Dan.

I recently installed a 1974 318 from a scamp into my 65 coronet. It was a drop in instillation and went wonderful, motor runs great. Here's my question, the 74 motor has what looks to be an electric choke, at least there's a rod that drops into the intake right next to the carb, it has a...

I'm tossing around the idea of replacing the 273 in my car with either a 318 or 360. This will be a bone stock motor as I'm looking for dependability. My question is what year casting should I be looking for? Some sites tell me the L.A. motor was made from 67-76 others tell me something...

I've been told that the original transmission will not mate up to a 360 without a reducer bushing, Do you know where I can get this bushing? Thanks.

This is a two part question to my first email. So if the 273 motor is smoked and I'm not really sure about the transmission in the car would I be better ahead to bolt in a 318 with the matching transmission instead? and if so what modifications will be necessary to do this? it's going into a 65...

I bought a 65 with a 273 engine in it, the engine is done, my question is can I put any 318,340 or 360 engine in it's place? I'd like to bolt replacement engine to current transmission. Thanks, Dan.

did they make a radiator shroud for a 225 slant six radiator? do they need one?? Thanks, Dan.

good black rear seat out of a 68 dart. 35.00. located in Willoughby, Ohio. shipping would be expensive, would like local pickup if possible, Thanks, Dan.

Factory dual point distributor from a 68 340. A must have for anyone assembling a factory correct engine. I have two of them and would like 100.. apiece. Please feel free to contact me at this thread. Thanks, Dan.

I have a 68 dart with original 6 radiator, it's very small and runs a little on the hot side, but not to bad i'm just a freak about stuff like that. is there a v8 double core radiator with both hose hookups on the passenger side I could order that would keep this little monster cool?

I have a set of front buckets with headrest and tracks plus a complete matching back seat for sale for a 68 dart I no longer need. There in pretty good shape. If interested please contact me. I dont know how to post pictures through this website but do have pics. Send me your email and I will...

I picked up a four speed and would really like to know exactly what car this came out of. Here's the numbers that I have found on it. side cover- C95664Z 3-27 Left side by bellhousing- 3-29-68 23 spline right side of tailshaft- C-96707J right side by filler plug- H-3...

complete 68 gts dart interior, not perfect but complete. 500.00. Will sent pics upon request. located east of Cleveland, Ohio. Thanks, Dan.

can anyone tell me what the lightbulb size is for the fender mounted blinker on a 68 dart? baan looking and can't seem to find one. Thanks.

can anyone tell me what size the bulb is in the fender mounted turn signal of a 68 dart?

Hello, Maybe you guys can help me, I've been all over town trying to find this. I'm looking for the lightbulb that would go in the fender mounted turn signal, it mounts on top of the fender. Any ideas what that bulb is???? Thanks to all, Dan

Does anyone know where I can get the left handed wheel studs for my 68 dart? Want to keep it original. Thanks, Dan.

Is there anyone who candecode the last line of my fender tag? it reads as follows, LL21 21 5 11 212 191424 I know somewhere in there is the actual build date, I'd like to know that as well, Thanks, Dan.

Is there anyway to I.D what this transmission came out of? I've had it forever and would like to know if it's the original transmission from my 67 rt. The only numbers I can find are on the left side and they are as follows, PK3515845 3822 6115 Any help would be great...

I'm looking to buy this transmission and want to know what it came out of before I buy it, here's the numbers. right side tailshaft- C 96126-1 RT SIDE BODY C-99129 I.D. PLATE RIGHT SIDE- 9 423931 RR8332875 028 SIDE COVER- C95664 Z Any help would be...

whats the earliest date anyone has seen on a 67 340 block as far as a cast date goes? I've got three of them and there all dated 6-67. Dan

bought a 340 block this weekend and need helping decoding it. Here's the numbers, 2780930-340-2 night 1-15- either 71 or 73 rail stamp- 1B422803 Number on front of cylinder #1- GM340P35900064 I'd like to know if this is a 71 or 73 block and anything else you can tell me about it. With...

looking for a 67 340 block dated 11 of 67. Anybody know of where i might find one? thanks, Dan.

I have a 68 gts that I bought as a basket case. My question is did a 68 gts come with a front bench seat? I had someone look at the fender tag and they said it looked original to the car but had the numbers for a bench seat. What should the numbers be for a bench versus buckets on the fender...

Hi guys, help me out here. I have a 1968 440 hp block. I also have the heads that I got with the motor but don't think there the originals. the numbers off the heads are, rt side, 2843906-8 31 11017 LT SIDE, 2843906-4 31 10267 any help would be appreciated, I've had this motor in my...

I'm throwing together a 318 that I have just to get my car around. What i'm looking for is a good sounding cam that really sounds healthy, the motor is stock. It has to be hydraulic and the car has an automatic. Thanks.

I have an in progress 68 gts, do you know of anyone who might have a template to drill the side fenders for the gts emblems that go there? my car came in pieces and the fendres that came with the car aren't the original gts fenders. Thanks, Dan.

Hi guys, I'm looking at a 71 340 block. The question I have is does this block come with a steel crank or a cast crank? how much would the crank cost?would either work? im putting this in my 68 when I have all the pieces. Thanks for all your help, first timer Dan.