Search results for query: *

Looking for a passanger side upper control arm for my 67 barracuda . need the small ball joint unit . Threads must be good. Live in Lethbridge Alberta but have shipping address in MT so no shipping issues from USA.

Had a real suprise today when putting in new KYB shocks .Upper ball joint had popped out of upper control arm - don't know when happened but luckly caught in garage -could have been very bad if driving on road . Got ball joint apart with homemade tool (picture)and hammer but when looking for...

Can anyone recommend a brand ,supplier and part # for high brightness led replacement of 158 instrument cluster lamps for a 67 Barracuda. Have looked at many sites for replacements but I find confusing ,

Was looking to order carpet for my 67 Barracuda with floor a/t console(floor only) and see on all sites "carpet with console strips" or "carpet without console strips " but cannot find a site that tells me the difference. Anyone tell me what that means ond recommendations re carpet suppliers ...

Am putting in new front seats from Procar and am looking for comments as to the best looking , easy to install aftermarket steering wheel . I have ps and wondered if people have recommendations re size . Don't want to impede view of instruments . Was looking at the grants from 13.5-15 inches...

I am looking to redo my front buckets and rear bench on my fastback. Original interior seat colour is gold and very expensive from Legendary . If I use the original seats and legendary covers it will cost approx$2k. Was thinking of using Procar seats and adaptor brackets from YearOne in the tan...

I am moving to Lethbridge (West side -Stoney Place) at the end of June. Want to make contact with Southern Alberta members so I can possibly cruise with them and pick their brains as I work on my 67 barracuda fastback . Hoping to join a car club or 2 in Lethbridge . Am presently a member of...

I need a floor automatic shifter c/w reverse micro sw if possible for my 1967 Barracuda f/b . Previous car owner put 8 ball on shifter and without proper setup for my b/u lights am having trouble with my provincial safety ck. PM me if you have something . Tks

I need a passanger side mirror for my 67 Barracuda fastback . I keep getting notifications from e bay re mirrors but they all seem to be for drivers side with remote . Anyone have a passanger side mirror or know of a place to get one . Have done a internet search but can not seem to find...

This may not be the best place to post but here is the story. My son lives in Moncton and is having problems finding good employment and getting to Gagetown for his military reserve duties without a vehicle .Any members or your friends around Moncton who have a good vehicle for sale under $4K...

I am planning a move from Cranbrook BC to Moncton NB in the spring . I need to ship my 67 Barracuda FB or sell it. I have heard horror stories about some car moving companies . Anyone out there have companies to recommend or stay away from? My preference is enclosed trailer over rail but costs...

I am planning to replace my stock intake and 2 brl on my 360. Engine is 72 I think and is in my 67 Barracuda (904/7 1/4). Was looking at the Summitt easy kit -Eledbrock performer with the 600 Eledbrock carb. This is a cruiser and not planning any strip use .Is this a good combo or is there...

Does anyone know a good place to buy wheel well mouldings and outside passenger side rear view mirror for a 67 Barracuda FB. I know they are expensive and don't mind spending the money for quality stuff. Tks

Am looking for info on what would be a good street 4 brl intake and carb for my 360. Live in a colder (morning/evening) area around 3000ft.May change cam to mild/medium street down the road so a intake/carb combo for mild street would be good. Car is a 67 cuda fb presently with stock 2 brl .Any...

Am going to see my sister in Spokane this week (May 23-27) . Any Spokane area members with parts for 67 Barracuda fb with a 360 engine .Looking for complete electronic ign setup and 4 brl alum intake with or without carb and other misc. parts like passenger side mirror ,wheel well moulding, etc...

I am looking for a good street use 4 brl intake manifold (and carb ??)and electronic ignition for my 360. Live in a mountain area (3000') and gets cold so something with manifold heat would be best. Tks.

Hi to all Canadian members . I live in Cranbrook BC. Am looking for a 4brl intake manifold and carb for my 360 in my 67 cuda fb . Would also like to get a electronic ignition setup for the 360. Know I can buy new but thought someone in the west may have what I need that they are not using . If I...

Went to mount my new cragers on 67 cuda(5 on 4) and found loose studs in front hubs and 1 or 2 in rear axles.My studs are the 7/16 *20 rh about 1 1/2 in long. The # on studs is D 096.Car has 10 in drums.Seems like the shoulder size is .550 but do not fit tight in hub .Hub hole size seems to be...

I would like to put a stripe on my 67 barracuda. Interior is gold and exterior colour is forest green.Was thinking of going gold for the stripe kit but was wondering what would look better and if lower,middle or hood/roof stripe kit would look best or a combination of these. Car will have chrome...

Am fairly new to this forum and have read threads on tire/rim combos. Need specific opinions on 67 Barracuda tires /rims. Am intending to buy Crager orig. ss mags - 15*6 ,3.375bs for front with 215/60 BFG radial TA and 15*8 , 4.125 bs for rear with BFG TA 255/60/15 . My bolt pattern is 5on 4in ...

I am new to this forum and hope someone can help me on the colour of seat upholestry . I just purchased a 67 Barracuda fastback and the previous owner told me he was going to order gold for the seat colour. The car is the original Forest green . Cked Legendary and Fryers and see gold is NOS and...