Search results for query: *

Looking for a good shop to do the final body work and paint my dart. Central Indiana or within 150 miles from Indy. Car is on rotisserie and can be painted on it as well. Currently in epoxy primer. No rust, needs high build, blocked and painted to original FE5.

Car is a 70 Dart

For small UCA ball joint and LCA tap to press out sleeve $40. Plus shipping

Well that was certainly a real PIA! Got them out without any damage to windows, car or knuckles.

2 sets. These are in great shape. Bare. Have been sandblasted and primed. Includes set of stiffener plates from Mancini and one set of adjusters and 2 sets of pivots without bushings. $200 plus ride.

2 sets. Blasted and primed. New Ball Joints and Bushings moog. One set “x” arms are pushed inward too far From press and not symmetrical, happened when removing the bushings, i think may be able to be pushed back out with a small pneumatic jack. Other set is aligned. $100 plus ride.

New never installed. Going to 4 speed. Purchased from Classic Industries. $90 plus ride

OK I bought these 5-6 yrs ago and not sure what I really have here. I believe I got them from Mancini but, can't remember cause I'm old as dirt and lost the receipt. I ordered these for A Body 70 Dart. So looking at Mancini's website there were 2 versions, A body and B/E body - now no longer...

My covers were bent and when doing reseal on floor board, it was easier to remove these. You van by repops from AMD Jegs but question for group has anybody used an alternative material? I was thinking some high density foam and contour to inside rocker to the floorboard. Here’s the parts in...

Don’t know what this fits. I know it doesn’t fit my 70 Dart. Earlier A body?

New never installed. $325.00 plus the ride. These are $496 on Summit. Includes gaskets and hardware.

Fresh rebuilds with Moog bushings and bumpers. Stripped, blasted, primered and Seymour Stainless paint. This is a very nice set.$250.00 delivered.

These are new, few very minor scratches from shelf sitting, nothing significant. Complete set with gaskets. I have these on eBay now for $395. Will sell to FABO member for $375.00 delivered. Helluva deal!

Need the 2 front sway bar brackets. Ones I have are pretty well shot.

This looks pretty cool. Anybody use one of these? I'm thinking could make something similar for a lot less $$ http://store.uscartool.com/Mopar-K-Frame-Stand-Drivetrain-Restoration-Tool_p_84.html http://store.uscartool.com/Mopar-K-Frame-Stand-Drivetrain-Restoration-Tool_p_84.html

Rebuilt, reinforced with stiffener plates, all new bushings and bumpers. Bead blasted, primered and 3 Seymour Stainless finish coats. This are solid and hard to find. $400 plus ride. I have rebuilt matching sway bar for $200 and shipping.

New bushings and ball joints, primed and painted in Seymour Stainless steel paint. This is a very nice set, ready to bolt on. 200.00 delivered.

64-76 LCA's, pulled fresh off of my 70 Dart w/ only 45k orig miles. These are exceptionally clean, no pitting, no dings, straight and solid. Blasted and wire brushed ready to paint. New rubber McQuay Norris pivot bushings installed. Located Indpls IN $250.00 Delivered. If you want, I can...

Is this normal that factory would have painted black around the radiator? Paint underneath is red, same as body.

WTB or I have set 73 - 76 with sway bar tabs fresh blasted and new bushings, will trade. My zip 46168. Thanks

What are the differences between the /6 and V8 K frames for 67-72? I have a slant now and am pulling it and doing v8 swap was going to use the schumaker engine mount adapters. I'm changing over from drums to KH discs, SBP, but want to upgrade to a frontsway bar. My current lower arms have...

Need for 70 A body.

What is that putty that is used on the pinch weld window frame? Seems it smooths out the rough imperfections on the pinch weld. It's white, painted over and been there for 45 years. Replacing front and rear windshields. Do I need to replace this putty stuff when I install new gaskets? If so...

Looking for the camshaft thrust plate bolt that has the oil drip hole. Thought I'd try here before I do a drill on a bolt.

Converting from auto to manual transmission. Want to swap out my steering column collar from auto to manual. Looking for just the collar. Thanks. jeff

Well it's underway.... My 70 dart swinger, I am the 2nd owner. Purchased in 2005 for my youngest daughters' 1st car. She drove it 1 mile everyday to school and then at college knowing one day it would morph into a street rod. All original; started 10 yrs ago with 27k miles, now sporting...

From 74 dart - stabilizer links. Indpls. $60 delivered lower 48.

Not certain what these came off of.... what u c is what u git....$95 delivered lower 48..

These are clean, no cracks or weld jobs... $100.00 and the ride from Indy.

Not certain what these are off of... What you see is what you get. Rubber bladders in both are good. Indianapolis, IN $80 and the ride and all this can be yours!