Search results for query: *

Chris, I have read your posts and totally agree with your conclusion. I also have a 68 Dart, 3250 lbs, 700 hp, Transbrake, Caltracs with Mono's, Rancho 9 ways....Spent all last season struggling with porposing, Hitting the rear tires to hard and Unpredictable launches with Spinning. Followed all...

Yes it is stll available. PM me if you want it.

Sorry Narrowed Rear being sold as an Assembly only. See post for measurements question Thanks, Steve

Being sold only as an assembly. Not sure on the stock measurement difference...I pulled those Measurements as noted from a reference site on Moparts. (Stock Measurements Could be wrong?). I do know that this came out of my 68 Dart with the Mopar Inboard Spring Relocation Kit installed. The...

Stock Measurements Axle Flange to Axle Flange 57 1/8" Spring Perch Center to Spring Perch Center 43.0" Information from Moparts Tech Reference

RCI Transmission Blanket for 727 SFI 4.1 Certification Dated 02/10 Nice Condition..will post pics soon. $65.00 + Shipping from 06798 Contact via PM. SALE PENDING

Griner 12-22G20B Transbrake Valve Body For 727 or 904 Reverse Shift Pattern w/mounting Bolts, Shift Lever & Case Connector Terminal. This is the Low Band Apply Version. Worked Perfectly Everytime! Changed Over To The Non Band Apply Version. Very Clean & Like New Condition. $450.00 + Shipping...

8" PTC Converter for SB 727 Freshened 5/11 - 12 passes since. Setup for transbrake: Stalled 5500 rpm @ 3000 lbs. 700HP/600TQ Purchased from Moparts Member as part of package deal. Don't need a spare.... $1100.00 New. Asking $550.00 OBO + Shipping from 06798 Contact by PM

Narrowed 8 3/4 - 489 Large Pinion. Richmond 4.86 Gears with Spool. Moser 35 spline axles 53.25" Axle Flange to Flange 35" Spring Perch Center to Center Was set up for inboard spring relocated A-Body Worked perfectly before removal for Dana upgrade $600.00 + shipping from 06798 Contact by PM

Aluminum Carb Spacer 2" Nice Clean Spacer for Standard Sized Carbs. (Not Dominators). $15.00 + Shipping from 06798 Contact By PM SALE PENDING

Mopar Performance Single Plane Intake Manifold W2 Oval Port Design. Very Good Condition...Clean. Water Heater Passages Sealed. $150.00 + Shipping From 06798 Contact By PM

ATI Super Damper Manufacture Date: 12/10 Like New Condition - 3 Passes External Balance Type For 360 SB Part # 918603E $200.00 + Shipping From 06798 Contact by PM SOLD

Every SB Motor Plate I have ever seen is mounted between the stock timing cover and the Water Pump. What needs to be machined/modified on the timing cover?

410 W2.........rest in pieces. Waiting for it's new heart Shady Dell Power 439 W2:burnout:

Bellhousing Alignment Spacer

Bore size?

There are two different types of centerlinks out there. Type #1: the pitman arm, idler arm and tie rod tapers all enter the link from the top. Type #2: the pitman arm & idler arm enter the link from the top and the tie rods enter from the sides approx 90 degrees different. I do not know the...

Just went thru this with my 410 stroker. I tubed both lifter galleys, drilled .040 oil supply hole in each lifter bore. Used the 8043-16 comp lifters with .631 lift cam @1.5 rocker ratio without any problem of excessive oil pressure loss at full lift. I am using oiling thru the pushrods for a...

Must be installed with the bars facing the block. The pushrod angles prevent installation the other way. Comp makes another lifter with the bars mounted inside the lifter wall #8043-16. They will typically not require any block grinding.

Wanted: Steering Centerlink for 68 Dart. 8 cyl. type PM me with pictures & price Thanks

I am looking for a Mopar Drill & Ream Kit Part # P5249508 Used to bore the lifter oil galleys in order to tube the block. The kit has been discontinued and I hope somebody has one that they could sell or rent out? Contact: Steve email: [email protected] Thanks