Search results for query: *

I have a 67 Cuda, do you redue the headlight surrounds? if yes, please contact me, Zippie#7

My friend Steve returned to me my turned down Lifter that I needed for my oversize bore in my 340 that I am rebuilding. WOW, worked just fine, now we need to cut down a push rod to fit this new lifter. Steve is in the process of reworking the push rod as I write. Should have this 340 all...

I said I would keep everyone up to date on my problem of "oversize lifter", so here is where I am at the present time. First, let me give a big "Thank You" to Paul for all his help in hopefully solving this problem. First, I ordered a set of HL-230-921 Lifters from Mondello performance Products...

I am now in the process of building two 340's and have already installed a tensioner on one of my engines. If you have noticed, the original cam plate has "four " bolt holes in it, I went ahead and drilled the forth hole in the new tensioner so I could install that forth bolt. But, before I...

Hay Paul, thank you very much for all your help, so far, so good. I will be sure and keep you informed on how this works out. If it dose work, you will have saved me some bucks. Again Paul, your the man so far. Zippie#7

OK, Just bought a set of those .921" Dia. Old's Tornado lifters today, one I will be using on my out of wack lifter bore on my 340. So, If any one need's an oversize lifter for a 340, I will have them. They are not sold individually, but if you need one I will sell one to you. Thanks for all...

I would like to thank everyone for their quick reply's, that was great. I think I know the way I will be going now and will keep everyone informed of my progress. Again, Thanks to all. Geo., Zippie#7

Hmmmmm, OK, who would sleeve a bore for me, the machine shop I used said they "do not" sleeve lifter bores.

O.K., here we go, I am rebuilding a 71 340 engine. Today I was putting in a new cam and hydraulic lifters when I discovered that the bore on the driver side next to the fire wall was very lose!, about 8000-10000 lose. I went to the machine shop and asked the machine guy what he thought, he said...

Hay guys, thanks for the info, great information and now I know what I am looking for.:cheers:

Is there any difference between 318,340 and 360 rods? If so, what?:glasses3:

Thanks, that makes me feel alot better.

Went to my shop today to do a little work on two 340 blocks that I got back from the machine shop a couple of months ago and after mounting the first one on an engine stand I found that the bores in this block had light rust in all the bores! OOOOH NOOOO, Got a clean rag and some motor oil and...

By far the best post I have looked through!

Great looking ride, have fun and enjoy, life is to short!

Boys,Boys, be nice, would not be hard for her to make Jr look bad!

Hay thanks, never thought it would happen, I am hopeing to get some good help from this site.

I have a 67 Barracuda conv. that I am presently working on, great car for Florida, hope to have it completed by next summer.

I have been looking for the P L Y M O U T H letters on the frount of my 67 Barracuda, haven't found a set yet.

Thanks for the reply.

Is Layson's still doing buisness?

Today, the rebuild of my 67 Barracuda convt. has started. I found the paint and body man that I want to work on my car and believe me that was not easy. He showed up this morning at my home and looked my car over and told me how he would be doing the work and why he would do the work that way...

Hay guy's, How about a small cardboard sign "FABO", then we can talk!.

"If I were a rich man la-de-da-de-da-de-da" !! you do wonderful work, and I am sure have a wonderful mind. Only the best to you in all you do. Thanks for the post, I would love to do this with my 70 Dart or 67 Cuda conv. Zippie#7

Well, lets see, I at the present time have three 340's that I am building, 69-with J-heads, and two 71's with X-heads. But, in the wings I also have an early 360 bored 60 over, 371 I think, that I plan on building later on. When friends drop around they often ask, what are these, I answer 340's...

Never had this happen to me, why you ask? well if I give something to someone, I figure I will never get it back!, If I do get it back, that's great, If not, never again!

When I was 68 years old and had just retired in 09, I went to the doctors and he took a blood test and then asked me a few questions. After reading my blood test and me telling him that even with a good nites sleep I still felt tired, he told me that my T-level was low and that I needed to take...

I want to be there this year!

I for many years was the proud owner of a Velocette single 500, had friends with Vincent's, we went many long miles together. Your post brought back fond memories.

Very nice car, I once owned a 61 Impala 348 Tri-power 4-spd. I enjoyed that car! I treaded a 40 Ford coupe with a Hemi, with a Cad-LaSalle trans and an Olds rear end. ERRRRRRRRRRRRRRR what was I thinken!!