Search results for query: *

Are they repops or original used parts? The pigtail for the front or back / If used what condition are they in?

Sent PM on Pillars

Installing Weld in Subframe connectors on my Duster, checking the E-brake cable I found that it comes in contact with the side edge of the subframe . Looking for pics of other install how you addressed the E-brake cable and any concerns with the Gasline and Brake lines. I will be installing new...

PM Sent

If i am not mistaken yearone sell the bracket

Would you be able to give the measurement location for the 4 1/8" hole, I have the holes drilled for the scoop and looking to make mine functions. Duster Hood is not the same when I laid out for mine I used a Dart Hood and made the adjustment I sorry but I do not recall the difference in the...

1973 AND UP K FRAME SWAY BAR GOES THROUGH THE CENTER, Can you share the gizmo with everyone thanks

do you still have the dome light assembly for sale and the AC Plenum?

I will take the dome light assembly

How much are you asking for the chrome housing and side makers lenses?

interested in fender bolts, 70 Dart rear harness,pic# 5wiper blades and arms, also would you have the wire harness for 70 front head light engine?

looking for 11 in brake parts the e brake lever and c clip also the spreader bar that the e brake is part of. Hope that my description of the parts are understood if not please pm Thanks

I pick up a B Body rear end for my A Body Duster yes for the large bolt. I realize that the spring perches will have to be relocated 1/2 in. I checked the spring perch they seem to be 5 degrees off towards the front of the car, or the pumpkin when installed on the car, is this correct? Has...

Thanks for the replies, what through me off was the mount that came with the transmission.

I am in the collection of parts from a slant six to a 340 swap for my 1970 Duster. I have a 727 Transmission for which I plan to bolt up to the 340. My question now I am looking at the transmission cross member will the cross member have to be replaced? The cross member on the car appears to...

Thanks, both of my cranks are steel, now off to buy a converter, Hughes ,ACC any suggestion

I have a 340 crankshaft and would like to know if it is a cast or steel crank. I looked for a casting number no luck, the only numbers that i could locate were a 50 in a triangle with a capitail R above. not sure if this means anything to someonethanks in advance for any help

Nice looking car may be to far to go get her. Curious do you have the AC parts?

Where is the car located? When you mention that the car was stolen and the next owner it will show up clean does this mean that the car is not registared in your name? Are you going to get the car running or as is? Thanks

This year the weekend of Aug 16 & 17 / 08 http://www.moparfest.com/ preregistered last week. I am from Northern Ontario, Sudbury, we have a few Mopar's running the streets up here in the summer. My Mopar is a 1970 Duster that never left the north other than the drive down to the moparfest.

looking for 340 spool type motor mounts for 1973 a body (DUSTER). also sway bar attachment the u shape that connect to the k-frame for 1970. Thanks

Looking for swaybar attachment brackets for 1970 Duster. Have swaybar missing brackets. Thanks

looking for swaybar brackets for early abody 70, 71

when you upgrade to the 11" where you able to use your existing e brake cable? If not what replacement cable did you find. I know that the Aspen came with an 11" drum I think it was 1977. I am wanting to upgrade my Duster form its 7 1/4 to 8 3/4 which originally is a 9" setup. thanks

thank you for the reply 7demon2,

can any one tell me or send me pics of the location of the interior adjuster lever On the drivers door for ralley mirrors on 1970 duster thank you

I was told that there was a problem in the number six, cylinder with oil flo I will try and find out more about this mod. I am in the process of rebuilding my 340 with stock oil pan, I was wondering because the motor is all apart would it be a good time to invest in a high volume pump. Thank for...

considering the purchase of a high flo oil pump for my 340 or should I be satisfied with the stock oil pump. will it cause a low oil level in the sump. the high flo require a larger capacity oil pan, also does any no of a modification on oil flo to the number 6 cylinder thanks