Search results for query: *

looking for a good manual steering gear for an abody one that's in good shape and not crazy price going on a 71 demon let me know what you guys have thanks

hay guys selling this grant steering wheel only reason wife didn't like how small it was got a different wheel In car now brand new with install kit is around 80 I believe I'm looking for 50.00 plus shipping and paypal fees thanks cj located in wisconsin

http://www.ebay.com/itm/Crane-Rocker-Arm-Guideplate-Conversion-Small-Block-Ford-Mopar-P-N-36655-16-/401049191288?hash=item5d60650378:g:JI4AAOSwK7FWho02&vxp=mtr has anyone on here use this conversion to get away from the shaft mounted rockers they kit says you can then use normal roller rocker...

I'm taking my car to the track and wondering do you guys run a quart over I have a 340 with a stock pan running five quarts right now

hay guys wondering what oil everyone is running and why. I have a 340 with hyd flat tappet cam I heard of people running standard oil with an additive added to it but I don't want to do that I currently running joe gibbs hr oil conventional oil here is my problem a friend of mine is also running...

hay guys wondering if anyone had this problem I have a brand new Stewart warner digital tach and shift light when I'm doing a pull the tach will start to not read accurately at the top of a pull around 4600 or so what it does it will read 4600 then 5200 back to 4300 and just bounce around and...

ok just wondering I have a comp cams xe268h cam in my 340 small block with early j heads with the bigger valves just wondering if the heads are being my limiter on making more power it does have 10:1 pistons in it also I feel like the car should pull harder on the top end just wondering thanks

hi guys I know its not an a body but still a mopar what im working on it a 1961 Chrysler imperial four door with push button trans and a 413 in it. the story starts out with the car had a really bad vibration but found out the center bearing was shot it a two piece drive shaft so sent out shaft...

ok I have a 71 dart with a fresh built 340 and im doing some final tuning on it well every thing was going good I have a wide band 02 sensor in the exhaust numbers are looking good so I pulled plugs to check the out and I notice that the two from second from the front of the motor should be 3...

ok guys im thinking its trans issues that I got just want to see if anyone else had this problem, I have a 71 dart swinger with a 340 that is fresh 1000 miles on it may be and a 727 trans with the same, now when I first get the car out and drive down the road I feel like the brakes are being...

im sure this has been asked on here before just cant find anything on it when I search for it, my question is I have a 76 dart that im converting to manual steering the box im getting in a early 64 to 72 but I am getting the pitman arm for it, will the tapered ball joint end fit in to my center...

hay guys like the title say I got some bad vibes with my car at around 60 ish mph and the some what go away a little faster and then they are there again, had my drive shaft shorten and balance like two weeks ago due to installing a 727, just checked all of my drive line angle and here they are...

hi guys just got the car running again tonight, what I have is a early 340 with 10.1 compression extreme energy cam and old offenhauser tunnel ram intake im running two 450 Holley carbs just had the carbs rebuilt by a very well know engine shop in my area now my question is im running a total of...

hi guys finishing up the trans swap on my 71 dodge dart went from at 904 to a 727 bolted to a 340 got every thing done and went to put the dipstick tube in from my 904 and found out that's not long enough so I ordered a new dip stick tube from summit an allstar locking dip stick tube so I got it...

like the title says Im looking for a good dipstick tube and stick for a 727 small block trans let me know what you guys have thanks

sell set off small block la mt valve covers in good shape has some chips in black paint but not bad no cracks in the covers looking to get 70 obo plus shipping parts are located in Wisconsin ready to ship out thanks for looking cj

hay guys looking for a power steering pump brackets I have the Saginaw pump came with my 76 dodge dart 318 car I now have a 340 in it now I have the double groove crank pulley and a single groove water pump and I noticed that my power steering pump sits to high the was an ac car so im thinking I...

hi selling at set of mt valve covers for small block mopar in good shape could use a respray of paint one cover has some chips in it but not bad looking to get 85.00 plus shipping all parts will come from Wisconsin I also have a edelbrock air cleaner 14 inch round with a 3 inch paper element...

looking for a flip top gas cap for my 71 dodge dart let me know what u got and how much

looking for an antenna for my dart the car is a 71 dart but i think 70 to 72 will fit if anyone know if there are more years that fit that would be great but i need the base part of it i have the mask already and also looking for a mirrior for driver side door that has good chrome would also do...

hi guys im trying to get my dart running, the setup is a 340 that has just been rebuilt 10.1 compression and a comp cam extreme engery cam http://www.summitracing.com/parts/cca-cl20-223-3/overview/make/dodge running 26 degrees of timing with mopar performance dizzy recurve kit,converted to hei...

where can i get a 12 volt source for my msd coil i coverted to hei four pin module and i cant find a hot with key on and hot when cranking any help would be great

1. edelbrock 14 inch with 3 inch air cleaner good shape 15.00 plus shipping 2. two 6 inch with 3 inch chrome air cleaners good shape 20.00 plus shipping 3. washer tank with motor came out of a 76 dart swinger not sure if motor works but tank is not cracked 10.00 plus shipping 4. 3 1/2...

hi guys got a question about rear brakets for a 70 to 73 dart swinger, from what i been finding i see that 70 to 71 brackets are different than 72 to 73 i dont know what is different, and also my question is are the brackets differnt from left to right, i have a set of them and when you look at...

hi guy i know this isnt the b body forum but we all like mopars on this forum. looking to buy a 1970 coronet 440 a few hours from my house, here is what the car is its a 318, power brakes, power steering, disc brakes up front, super clean car no rust on car at all one of fenders has a dent...

hi guys i have a few parts for sale that are not needed 1. offy tunnel ram intake with the i/r adapters looking to get 250.00 it is polished in good shape does have small crack where bypass tube goes in cheap fix 30.00 i had quted 2. small block hedman headders they are ceramic coated...

hi guy i got a 72 dart swinger wondering if anyone out there could help me with what hood would fit my engine setup, what i have is a 340 with a offy two four barrel intake with the i,r, adapters, just wondering if a hemi sixpack hood would fit or am i going to have to run a flat hood with a...

hi guys just wondering where is the best place to mount a electric fuel pump i have a 72 dart swinger using stock fuel tank with a sump and also dont know if this matters but do have the springer relocated any help would be great

hi guys wondering if anyone knows were u can buy new door handle cups, the one i got the plastic is dryed out let me know thanks i check yearone and ebay already for 1976 dart swinger

hi guys looking to order up some seat cover from yearone. my question is i have seats for a 76 dart swinger front buckets and rear bench now i would like to order 71 covers for the car did the seat change at all will the 71 covers fit the 76 seats thanks let me know what u guys think