Search results for query: *

Many thanks for the quick answer! /R

Hi, Does anybody recognize this cam? It's a hydraulic flat tappet, i suspect it's from Lunati (based on the stickers on the car). I would like to get a new one with the same specs, in order to keep it simple regarding the rest of the valve train. /Rick

they´re made here in sweden, i rented that one. yes, its aluminium! fantastic lightweight trailer =)

just finished my first ever dragrace! very nice and fun...learned alot. best ET 12.51 / 168 km/h , 7.98 on 1/8 on the trailer: at the track ,getting beaten by a camaro :sad1:

whats the maximum tire size in an early A-body with stock wheelwells and stock lockation springs? is it possible to squize in 26.0x8.5-14 with 10.20 section width ?

in my valiant-65: 360 0.40 over, 9:1 static compression ratio, stock heads with 2.02/1.6 valves, ported. 292/.501 hyd cam, edelbrock torker II , holley 750 dp and 1 3/4 fenderwell headers..mopar pointer less distributer , msd 6 digital. 8" turbo action, 727 tq with ta reverse manual...

Thanks for the info guys. I'll check the heads and then come back to you. Anyone here who runs nitrous? I'm thinking of getting a system, how much nitrous can you run on a 360 with stock rotating assembly? except for the pistons mentioned above.

Hi, have another opinion guestion: 360 0.30 over, completely rebuild,forged pistons 9:1, hv-pump, 7qt pan,windage tray, stock heads with 2.02/1.6 valves, ported. 292/.501 hyd cam, edelbrock torker II , holley 750 dp and 1 3/4 headers..pointer less distributer , msd 6. timing set at 36 degrees...

its a 360 .040 over. deep sump, windage tray, hv pump, camshaft dur 292 0.501 lift, forged pistons, 2.02/1.6 valves in ported heads, torker 2, holley 750 doublepumper, fenderwell headers. Mopar pointerless distribiutor and MSD 6 digital, MSD wireing. previous owner ran 12.70 with the ignition...

ok, thnks for the advice. Will try 10w-30. The oiling system is stock besides the hv-pump, windage tray and deep sump. It´s a street/strip, on the strip the revlimiter i set on 6900 rpm.

here are some pictures. valiant-66 valiant-65

hi guys. The previous owner on my valiant used "76" 20W-50 racing motoroil, and the pressure is steady just under 75 psi (hv-pump). But when i went to the local shop to buy oil, he said that 75 psi is way to much and that the timing chain would wear down and lose its tension wery quickly. he...

Hi everbody, new guy from sweden here. Have been reading posts here for a while and a think this forum is the best! I drive valiant, one -65 with 360 and the other a -66 with /6 how do i post pictures?