Search results for query: *

1970 Dodge dart swinger tribute, all original metal, rebuilt 1970 340 with X heads, correct exhaust manifolds. engine has about 300 miles on it. 4 speed with new Ram clutch. 8 3/4 rear end with 355 sure grip. New super stock leaf springs, new fuel tank and brakes. front end rebuilt. New 15 inch...

I have a 69 340, X heads, stock hp exhaust manifolds. air gap performer intake manifold. 700 double pumper carb. comp cam pp284h cam 0.484 lift. 4 speed car with a 355 rear end. I have a stock mopar, I think cei distributor. It has springs that are a lavender color. does anyone have experience...

I have a 69 340,X heads, stock hp exhaust manifolds air gap performer intake and comp cam pp284h cam 0.484 lift. 4 speed car with a 355 rear end. I have a holley carbureter 80778 700 cfm carb that needs rebuild. currently 69 jets in front and 78 in rear. 6.5 power valve can any one give some...

Can someone help me with a question about my drive shaft? I have a 1970 dart swinger 340 4 speed 8 3/4 rear end. I built this from a roller. I have a drive shaft that is to short. it seems to measure 3 1/4 across. I bought another shaft but it measures 3" across. will this work? what was it from...

I have a 1970 340 fresh build, I put coolant in and it is leaking at the lower radiator hose where it connects to the water pump. I tried to tighten the hose but still was leaking I looked closer and there is a timming cover bolt there, does that bolt go into the water jacket. could it be...

Auto meter pro comp ultra light water temp gages and auto meter pro comp ultra light oil pressure gage. water temp hit header has small spot see pics but still works fine. oil gage need tubing kit. $65.00 plus shipping from ohio

I am converting auto to 4 speed in a 1970 dart 340,I have all the parts and pieces, my problem is after installing flywheel, clutch disc and pressure plate and bellhousing. the transmission will not go in. The bearing retainer hits the bellhousing. I checked the alignment and it was off, so I...

1970 TA block for sale, needs repair. $1400.00 obo plus shipping.from dayton ohio prefer pick up.

Holley 650 double pumper 4777-4 manual choke, fuel line included. $165.00 plus $20.00 shipping in the contiguous us.

1970 small block intake manifold. $50.00 plus shipping from dayton ohio

You can run roller rockers under stock valve covers. 3/16 thick. $30.00 Plus shipping from dayton ohio.

Holley 650 double pumper, manual choke. Comes with new fuel line. $200.00 plus shipping from dayton ohio.

Holley 750 vac secondary electric choke #80508-1 . Comes with fuel line, gage and regulator. $80.00 plus shipping from dayton ohio.

Small block adjustable rocker arms and pushrods $150.00 + shipping from dayton ohio.Thanks.

I installed new mopar performance hydraulic rocker arms over oem used shafts, when I primed the motor i noticed that oil was comming out of the end plugs on the shaft, is this normal?

Small Block adjustable rocker arms and pushrods. $200.00 plus shipping. Items located in ohio Thanks.

Will stock 1972 340 rocker arms and shafts work on my 1969 340 x heads? Thanks.

Holley 650 mechanical secondary #4777-4 $215.00 plus shipping. Holley 750 vacuum secondary with fuel line,gage and reg. #80508-1 $100.00 plus shipping. Carbs are used.

Does anyone know the difference between a holley 0-80778 700 cfm and a holley 4778-4 700 cfm. They both have same jet size, power valve and are both 4150 type. also both have mechanical secondary. So whats the difference? Thanks.

I have a 1970 dart swinger 340. If I put an edelbrock air gap preformer intake with a holley carb on it with an 1969 unsilenced air cleaner will the hood close? Thanks.

Can someone please help me on type of carb? it is a 1970 340 stock manifold. can you use a holley ? the hole do not seem to be the same.

Can anyone help? I am converting from auto to a 4 speed. My question is how big to cut the shifter hole. I have been told to cut 1 inch in from shifter hump which would be a large hole ,is this correct?

Used Hurst shifter $ 75.00 plus shipping.

Used milodon gear drive. $175.00 plus shipping. pm with questions Thanks.

1970 340 ta block 60 over with some light ring ridge ware.Has not been decked or line bored.Missing one cap bolt and one head alignment pin is broken see pics. has been pressure tested and leaks at weld. I was told that the block can be repaired at indy cyl. inc. $3200.00 plus shipping from...

Small block 727 transmissions (2) with cooler $400.00 3000 hole shot stall converter with flex plate and bolts $100.00 Auto meter tach $65.00 Holley 750 w/vac sec. includes line and gage $150.00 Holley electric fuel pump $50.00 Motor mounts 6cyl. to v8. $50.00 Milodon gear drive $150.00 Comp cam...

I have a glove box from a 1970 dodge dart, can someone tell me how to remove the crome latch in front? Thanks.

I have a 1971 dodge dart steering column floor shift, removed from the car, also steering wheel has been removed. can someone tell me how to remove the collars and ignition switch so i can blast and paint them? Thanks.

I have a 340 block, the numbers on one side are 3577130.TA.340.1 and the other sie are 11. 25. 69. can any one help identify what car this came out of and also what wood be a fair asking price to sale it for. Thanks

I would like to paint the metal dash in my 1970 swinger, dash pad has aready been removed and painted with sem color coat.also gages and other have been removed. I prefer not to remove the metal dash frame from the car. It is currently a flat green I wish to paint it black can anyone advise me...