Search results for query: *

Hello all it's been a while

Reason I say custom is not do to length but just being aftermarket. Its not the heavy stock cast one its metal. I had it in my 71 dart with a small block and 727 trans. It had stock location 8 3/4 in it so should fit your stock located rear. I will measure it later from center cap to center cap...

Have a 72 dart with the flat style mounts . Whoever put mine look like they are kinda sideways . Is there a left and right or will they work on either side. Also the nut on the backside that holds them to the k memeber are gone. What size and thread r these. Look big like maybe 9/16 or 5/8

I have a used set of pulleys off my 78 318. One is for the water pump which has two grooves and the other is for the crank and has 3 grooves. My car had power steering and worked fine as these are a match set. 50.00 bucks shipped and they will clean up nice with fresh paint.

I wanna c a duster with these as I just bought 2 of a fabo member. I have always loved these wheels

I need one 15x7 with 4 inch backspace and bbp...

I need a single groove water pump pulley and crank pulley for my la 318 . I dont have ac or power steering. I need the correct set that sets deep toward the engine so they line up with my stock located alternator. Thanks

I need a deeper pulley water pump pulley . No longer running power steering which ran water pump. I need a deeper pulley so I can use same belt that goes around alternator

Will a front bumper from a 71 dart fit my 72 duster and look proper...

Just wondering what type of fluid you guys prefer to use on your 904 trans..

Can anyone post a pic for me. I got a duster and all the brake hardware is missing and I wanna put it back together. If you could post a pic of one side of brakes without the drum on that would be great so I can see how it goes together . I usually leave one side together while doing the other...

I have a crossmember off my 71 dart v8 . It will come with useable tranny mount. 35.00 plus shipping

Has anyone tried out the knock off air gap intake. Just wondering how well it bolted on and the quality. Thanks

Ok here is the situation I have a 72 dusted with a 8 1/4 rear believe to be from a 73 duster. It has14 x5.5 rally wheels with 4 inch backspace and 235 60 14 . The tire is only about half inch from hitting springs. I have seen a lot of threads with dusters fitting a 275 60 on without spring...

I forgot how to change avatar... help please

What is the the width of a A body 8 1/4 rear from backing to backing plate. If I measure feom the top side of backing plate on the inside to inside measurement its about 48 1/4 . Just doesnt seem like I can fit some wide tires on my car with a 4 inch backspace. Seems like most duster owners can...

Will quarter panels from a 71 dart 2 door fit a 2 door 74

I have a very solid 71 dart shell for sell no title. Quarters are really good as well as frame. Pic shows rearend but its gone as well as front disc brakes and upper control arms. Has v8 k member was a 318 car. Has flat bottom trunk with fuel cell. No interior besides dash and heater box and all...

I have a set of 14x6 ralley wheels for and they are bbp. 250.00 comes with 235 60 14 tires on rear ones. Good tread

I have upper control arms rotors dust shield and calipers. Also comes with brake pads which look like they have a lot of life left. I will throw brake hoses in as well . All parts are usuable. I want 250 plus 3 % paypal fees and shipping cost. Thanks just pm me...I forgot to say spindles come...

Found a holley model number 8105b for sale for 75 bucks. Seems like a good deal guy said it came off a running car and looks super clean. Guess the guy went with fuel injection. Im thinking its a 600 vacuum secondary carb . I have a 318 with j heads streetmaster intake and headers. I think it...

Found a holley model number 8105b for sale for 75 bucks. Seems like a good deal guy said it came off a running car and looks super clean. Guess the guy went with fuel injection. Im thinking its a 600 vacuum secondary carb . I have a 318 with j heads streetmaster intake and headers. I think it...

Just traded a 93 chevy short bed truck for this car. Its a 72 duster original slant 6 car with ac. It now has a 318 with small cam unknown specs with j heads and edelbrock torker intake and headers. Cool thing is it already has the bbp brakes and 8 1/4 posi rear unknown gear. Pretty sold car...

What seats are these from im pretty sure not a a body. Im thinking b body

Buddy wants to know if doors from a 74 four door dart fit a 70 four door. Also will the seats

Will the front and back bench seat from a 74 four door dart fit my two door dart. Also will the trunk lid fits it looks like the lid would fit. Thanks guys

Just wondering what is needed to make the swap work . Im putting fenders hood and grill and bumper from a 71 scamp on 71 dart . I believe just swap it all including where the hood hinges to

Im selling my FTI 9.5 inch converter and it has less then 75 miles on it. I decided to part everything in car so its gotta go. I paid 608.39 shipped and that was a discounted price it normally runs 655.00 shipped. Its rated at 3400 to 3600 stall and is a awesome street strip converter. If you...

I have a nice set of 10 x 2.5 drums with backing and drums are slightly and all hardware. The drums have less then 100 miles on them. They are big bolt pattern. 125.00 plus paypal fee and shipping

Its the cone type 489 case with 3.91 gears and gears are in great shape low miles. No pic as it is still the car. I want 475.00 plus ride and thats usually 80.00 bucks because of the weight