Search results for query: *

For sale, 1970 Dodge Dart Custom in Plainfield, Indiana. $14K. See link for photos. http://indianapolis.craigslist.org/cto/4041043795.html Thanks for looking! Pm if interested. Clark

I thought this would be easy to find, but surprisingly I cannot. What is the stock torque converter stall of a 1970 dart 318/904 combo? Original gear set was a 2.73.

I have a few items for sale:1) A 1992 360 block, pistons, and crank with main caps. Crank and Pistons removed for inspection. Block needs honed. $100 for all of it.2) A Small block aluminum timing cover $203) A 1970 318 with 67K miles. Newish head gaskets, seals, and timing chain/sprokets...

Is it the action of the lockdown linkage "bottoming out" as its pushed all the way back Or The action of it moving rearward quickly? I cannot seem to get my car to downshift under heavy acceleration. 360 with a 904.

I just finished the rebuild on my la360 with a mild mp perf cam. Everything idles well currently at 800 rpm neutral idle at 20* advanced on a factory set Pertronix flame thrower II ready to run dizzy.I'm running into two issues: 1) From a stop, if I heavy foot the throttle it falls on its face...

Ok, so I believe my drivers side caliper is seized. I have bled off all four pistons, however only one moves with pedal pressure. My second issue is the caliper is dragging bad.I have to hold the wheel at 2 o'clock and after a 20 min drive my rotor is turning blue from heat. This is the second...

So this mc appears to be a Chevy unit on a small booster. Anyone have this unit and knows which end of the mc goes to which line, front and rear?

Guys, swapping a 360 with a mild cam into my 70 dart. I am still running the stock converter and stock 904 trans. Would I see any benefit going to a slightly higher stall converter... Perhaps a tci or Hughes? I see them in summit but don't know if the swap is worth the price. This is a pure...

Guys, I'm doing a 360 build to swap in place of the 318 in my 70 dart. I currently have no exhaust manifolds for the 360. What options should I consider? 360 manifolds? Headers? I have an automatic with power steering. If I go the header route I want ceramic coat but aren't looking to pay for...

Got this on a engine I bought and I'm selling it to pay for honing. This needs cleaned up and has a broken bolt in one of the thermostat holes for the smaller size thermo housing. I havent tried to remove it,but it should come right out. It also has a chip on a threaded hole, but doesnt impact...

Guys, I'm doing a mild 360 build on a budget so the specs will all be pretty OEM but I'd like to put in a mild cam. What lift and duration would be best suited with stock length push rods, valves, and lifters? 77 la block and heads. I run a weiand intake and 650 4 bbl carb.Thanks Clark

Guys I have two la 360 blocks; one is a complete 1977 and the other a 1992 minus heads and intake. I see that the 92 has roller lifters; aside from the lifter difference, is there anything else that may be different that would effect part interchangeability? I'd like to run the 77 heads on the...

For Sale: A MP unsilenced air cleaner kit. These are normally chrome new, but I had this one blasted inside and out and powder coated with a satin textured black. Its pristine. I have the lid, base, practically new air filter element, and a 318 4bbl pie tin. Asking $100 obo plus shipping. PM me...

I have a MP air intake assmebly for sale... not the intake manifold. New, these are chrome with a sticker on them, but this one I had acid dipped, blasted, and then powder coated satin textured black. Since then, I decided not to use it. This is the carb base, newish filter (still white), lid...

Ok I installed my ssbc w153 front disc kit to replace my old front manual drums and recently decided to add a power booster.My question is, do I need to replace my manual drum prop valve since ill be running power front disc with rear drums? What would be the down side if I don't change it?

Looking for a MP air cleaner setup in good to great shape. PayPal payment. Pm me if you have one and an asking price. Clark

Has anyone attempted and successfully made a rear track bat set up for their rear axle? My axle has some side to side motion when I get on it through a corner and with new 17" wheels I am getting slight tire rub on the quarter lip. I've already trimmed. I didn't know if this has been done. Clark

One set (minus small chrome A-piller pieces) vinyl top stainless steel trim from 1970 dodge dart. Good driver quality. Can email pics. Buyer pays shipping PayPal preferred. Pm me if interested. Thanks Clark

For sale: 1) 1970 stock 318 oil pan with drain plug. Good shape: $50 obo 1) distributor from 1970 318 with Pertronix kit (points eliminator kit) with about 500 miles since Pertronix install: $50 obo 1) accel canister style oil filled chrome coil with less than 500 miles: $15 1) alternator...

I am looking for a fan shroud to fit a 1970 dodge dart with 318 non AC. 22" radiator. PM Me if you can help me out,

Looking for a super cheap set of 318 LA head stock steel valve covers that aren't bent and banged up. PayPal preferred.

So yesterday I dropped in my new hei distributor from skip white with accel super stock canister coil. Everything started and idles fine. This morning I jump in to pull out of my garage and all I got was a click.I jump start the car and its running fine. Turn it off and it struggles to turn...

4: 14"x5.5 small bolt pattern rallies, center caps, trim rings, and bfgoodrich 215/70r14 tires all with less than 1k miles on them. Wheels were blasted and professionally powder coated silver. Excellent condition items! $600 takes it all. Will not seperate. Thanks, Clark

Just ordered a set of 17x7" wheels and was curious if there are any suggestions on tire size out there for these. My dart sits stock, so I don't want to risk rubbing.

For Sale are a pair of raised fin aluminum valve covers. In pretty good shape. Could use a new coat of paint. I just bought these from a FABO member and I decided to go a different route (staying with the stock look). The second picture shows a small chip missing. Very minor... would not effect...

8.75 with 741 open diff.... tearing down to replace seals and bearings but I am stuck getting the 2nd axle shaft out. What holds this in place? The other just slipped right out? Judging by the axle shaft that came out... I'm assuming the bearings need pressed onto the shafts... can someone...

Looking for an unsilenced air cleaner for a 4 BBL carb that I can put a pie tin on. Its going to be blasted and powder coated anyway so I'm not worried about finish so long as its not bent or dented. PM me if you have one. Thanks, Clark

Any ideas why my wipers will not return to their home position? Worked fine yesterday, but today keep running when I turn them off and when they do stop don't return home. Electrical or mechanical? Clark

Just finished installing my new Summit 600 CFM carb with electric choke and Weiand Action Plus 4 BBL intake. All is fine at idle and mid to high RPM but I am getting a hesitation at take off. So far I've adjusted the air/fuel mix and have maxed my vacuum at idle and have adjusted my curb idle...

Just put my new 4 bbl intake and carb on and I need some help with the kick down linkage on my 904. Should this be all the way forward, half way, or all the way back on the stud? Meaning, the slot on the arm of the linkage. Thanks, Clark