Search results for query: *

Hello - I am currently running a MP electronic ignition with the chrome box on my 416, 4-spd dart. I would like to have a rev limiter for the occasional trips to the track and avoid an overrev. I am very new to ignition systems so I am looking for suggestions on which way I should...

The Slate Belt Mighty Mopar Car Club will hold its annual Father's Day ALL MOPAR Car Show this Sunday June 19th. It will be held at Reagle Dodge in Bangor PA (about 30 min north of Allentown). We always have a great turn out with a wide variety of MOPARs and a friendly atmosphere. Attached is...

Can anyone recommend a good place to order a set of Cragar S/S rims with custom backspace for my 68 Dart? I need a 4 3/8" BS (or close) for the rear on 7" rim to clear my 255/60R15 tires. I am running a set of steelies with that BS and everything fits nicely. My local auto parts store says...

I would like to put in 3 point seat belts in my 68 dart just for some added protection. I have the stock shoulder belt that mounts to the roof but its really uncomfortable. Has anyone taken the 3 point belts from a late model dart and used them in a 67-9 dart? Does the reel get in the way of...

Need a new battery for the Dart and am considering an AGM battery but... 1. Are they worth the $$? 2. If so, there are a bunch out there each with different and inconsistent reviews...Exide, Deka, Diehard, Odessey, Optima, Duralast, etc. Which ones are you guys running? 3. More...

Can anyone recommend a good set of wheel/car dollies? I want to be able to tuck my car in the corner of the garage for the winter. I have heard the harbor frieght ones are on the flimsy side but don't want/need to fork out $800 for the hydraulic ones. Thanks!!

I am looking to purchase a used 24' enclosed trailer for our race car and I am seeking suggestions for what are the better brands to look at. I have read that Haulmark and Pace are two of the better ones but they are hard to come by used. What other brands should I be looking for? Thanks!

I just put on a set of Dynomax ultra flows and I'm not happy with the sound. They are loud just don't like the tone. My brother has the original 40s on his mild 340 duster and it sounds good. However, I am trying to decide on either the Super 44s or the original 40 series mufflers for my 416...

Can anyone recommend a good upholstery shop in eastern PA, Scranton, Poconos, Lehigh Valley, Philly area? Some of the stitching on my driver's seat came apart so I need that repaired. Plus I would like the seat springs stiffened up a bit as well. I don't like sinking into the seat as much as...

What battery group size fits in the stock battery tray? My current battery is a group 24 but I cannot find any group 24 batteries that are the AGM style. Also do the AGM style still get acid/corrosion on the terminals or do they remain clean?

Has anyone tried the new Legendary Rallye seats? I saw them at Carlisle this year and thought the looked really nice...and comfortable. Did a quick search on them and didn't find many Mopar reviews. I guess they are still too new...

Anyone have a phone number to contact Cragar Wheel? They don't list a phone number on their website. I am trying to figure out if they still make the Keystone Klassic wheels and if so what sizes are available. Jegs/Summit do not carry many sizes. Thanks!

Has anyone purchased the "heavy gauge option" for Accurate LTD's exhaust tips? I plan on using them on my 68 dart with the TTI 2.5" tail pipes but don't know whether to go with the heavy gauge option. Any thoughts or opinions? Thanks

I am ready to paint my steelies...will be using the dodge dish hubcaps. I'm not sure what color to paint them. Gloss, semi gloss, flat...base coat / clear coat? What are you guys doing? Thanks!

Can anyone recommend where I could buy good quality replacement black kick panels for my 68 dart? The guy who had the car before me hacked them up to install speakers. I want to replace them back to stock condition. Thanks!

Sorry for the ignorance since ignition systems is not one of my strong points! I am currently running a electronic mopar chrome ECU and would like to know if/how I can install a rev limiter with my existing ignition system? I read the article in Mopar Muscle about the Rev-n-nator which sounded...

I can't seem to find the correct hoses to match my radiator. My local parts store is of no help and I cant locate it on Gates' website. The ports are on the top passenger side and bottom drivers side. Water pump is stock cast pump (port on driver side). Anyone have this combination and can...

Anyone have pics of Keystone Klassics on a 67-69 dart? I have Cragar S/S on now which look great. I am upgrading to a large bold pattern so I need new rims and I think I want to go with something different. I want to keep the old school look so I thought the Keystones would be a good choice...

Did a search and couldn't find the same (or nearly the same) combo as mine. I'm need some suggestions on front and rear shocks for my 68 dart. Will be a 95% street car. Has 416 stroker, 4 spd, torsion bars off a 340 cuda and SS leaf springs in the rear. Anyone have this similar setup or can...

So I am taking this business class and one of my assignments was to send out a survey (topic of my choice) analyze the results then prepare a presentation of the results to the class...followed up by a paper. So I am asking for some help here. My topic is "green energy". I prepared my survey...

I am not quite sure what carb I should buy for my first motor build. Here are the specs so far: 340 block stroked to 416ci, 9.8:1, cam is .548" lift 237/242 duration with 108 degree lobe separation, eddy airgap intake, and eddy performer heads, TTI headers. All mated to a 4-spd with 3:91...

I am building a 416cu small block for my dart and I plan on going with TTI headers. This is a 4-spd street car with occasional trips down the track. My friend said I would be better off with the 1 7/8" instead of the 1 5/8" step headers. You guys with stroked small blocks which size headers...

I am hoping one of the computer experts out there can help me. I need to buy a laptop for classes I am taking at night. I don't need anything really powerful, just something that can handle word processing, excel and powerpoint and websurfing. I will also need to download movies from you tube...

Looking to upgrade to TTI headers for my 416 stroker SB. I have a few questions for the TTI owners out there. 1. Will I be ok with the "step" headers or should I go for the 1-7/8" race headers? 2. How is the finish and durability between the ceramic coated vs. the polished ceramic coated...

Looking to convert my '68 dart over to a 4-spd over the winter. Looks like the majority of you use Centerforce clutches. Forgive my ingorance since I am not up on the latest clutch technology. Which one is the better application the dual-friction or the centeforce II? What is the real world...

Looking for a 68 or 69 radiator for an a-body 340. Would prefer a triple core. Let me know what you have. Thanks!

This is my first try at building a new motor for my 68 dart so I thought I would turn to you guys for some input. Here is what I have so far: 340 block stroked to 416 SCAT rotating assembly final compression about 9.8:1 to run pump gas Hughes cam .548", 237 dur, 108 LSA Eddy Air Gap intake...

I am looking for recommendations for some new shocks (all 4) for my 68 dart. The car will have a stroked 340 mated to a 4-spd with stock front suspension. I will also be installing new super stock leaf springs. What will be my best shock to go with for handling, ride quality and traction...

I am in the process of building a new engine for my '68 Dart...340 stroked to 416 and I am wondering what color to paint it. I think red is the correct color for a 340 in 1968. Can someone please confirm? I really like the orange but I'm kinda leaning towards the "original", "sleeper" look...

I've decided to powder coat my new Edelbrock Air Gap to help prevent against staining. This is my first time powder coating anything. I figured while I'm at it, I should go ahead and powder coat other "essential" items. This may sound strange, but I am having a hard time deciding what really...