Search results for query: *

Ok guys I know this is an a body forum, but I have a big block question for a pulling truck. I know there is plenty of experience on here so I figured I'd ask anyways. This off season I'm planning to build a 440 for the factory stock class I pull in, what I'm wanting to find out is what the best...

OK I have a slayer 4 bbl carburetor that I took off a performer 440 intake and now I'm trying to put it on an old '59 4bbl intake from a 413 but the mounting holes don't line up. I have a mr. gasket adapter that I just had sitting around # on it is 1932, will this work? If so, how? I only looked...

Ok I'm not 100% sure this is the correct area to post this in but I'm going for it. I have a 440 that I'm building for a pulling truck and I need to be able to make as much power as possible while creating 15" of vacuum at 1000RPMs. Is there any sort of mathematical way of figuring this before...

I have upper door trim plastic 2 sets(30+shipping per set), sill plate metal trim and other metal pieces(10+shipping per set of sill plates) make offer on others, visors(20+shipping), dome light, window crank, door handle socket(5+shipping for all), interior plastic pieces(20+shipping for all)...

I have for sale multiple trim pieces(make offer), sport mirrors with driver side controller(75+shipping), marker lights(5+shipping), plastic taillight housings 2 sets(20+shipping per pair), headlight bezels(10+shipping). Parts are located in south central Illinois.

I have a fuel filler neck with vent hose located in south central Illinois. Would like 30+shipping.

I have both passenger and driver side window tract and crank mechanisms(25+shipping), interior door handle mechanisms with handles(20+shipping), exterior door handles with key locks(20+shipping). Parts are located in south central Illinois. Take all parts for 50+shipping.

I have a set of hood springs that I would like 20 plus shipping for. Also a couple hood latch assemblies one is missing latch, make offer. Parts are located in south central Illinois.

I have a parking brake lever, brake pedal and master cylinder. Parts are located in south central Illinois. I would like 30 plus shipping for all 3 parts.

I have an automatic column shift steering column with key and a manual steering box with pitman arm. Parts are located in south central Illinois. Asking 100 plus shipping for steering box and arm. As for column I'm open to offers.

I'm looking for someone to set up my Dart Sport chassis for me, I want it outfitted to handle ~1000hp and still be somewhat streetable for the occasional cruise. If anyone knows of somehwere near central Illinois that can do this and is well recommended I'd greatly appreciate the info.

I plan to build a street/strip dart making good power on a NA pump gas engine. I want to build my car before I start on engine. So my question is where to start as far as making this car capable of holding a high horse 512 stroker and not twisting up like a pretzel? This is my first ever...

I want to start off by saying this isn't a current build it's been hibernating for about 5 years now as other major life purchases have pushed it back(built my pole barn house/birth of my son) and mind you I'm only 24 so not exactly sitting on a pile of cash to finish this within the year. Now...

[Ad Deleted by STAFF - Please read the Classified Rules before posting again.]

I have a 73 dart sport that I'm parting out I already removed the disc brake setup for myself. Was a 318 auto car with floor shift. Car is an illinois car so it's pretty rusty but still some salvageable parts I have a few parts from my project car which is also a 73 dart sport so feel free to...

I'm looking for a bellhousing for my 440 and np435. I've looked them up on lakewood and the part number I need is a 15335. I'm not really to excited about the $600 price tag tho. If anyone has a bellhousing laying around collecting dust that fits this description let me know. Thanks in advance.

Ok guys I have a 78 power wagon with a 440 swap and some serious wiring issues. The truck was a factory plow truck that someone removed and butchered the wiring on, not to mention the fact that the truck sat in a field for 14 years so rodents didnt help the situatuion much. As for my question...

Ok guys as some of you know I just recently did a little "sprucing" up to an old 440 I picked up. I replaced the camshaft and lifters(only internal upgrade) so now my question is on the break-in procedure. I have already purchased some Lucas break-in additive but I'm not to sure what oil to go...

Ok guys its my first rear main seal removal and its proving to be harder then I thought. The engine is a 440 it is out of truck and on engine stand. Crank is still in and absolutely do not want to remove it if at all possible but I can't get the top seal out(with engine upside down its under the...

Ok guys I'm looking for a 4-speed trans for my 78 power wagon that I recently put a 440 with a few extra get up and go parts. It's gonna be a work truck/puller so I'm looking for 4x4 relatively low gears. If no one has one close by info on what I'll need or where I might find one would be...

Ok guys I have a 75 440 I have the engine on a stand and I'm trying to remove camshaft without a complete dis-assembly of the engine. I know I have to remove fuel pump and actuator, Oil pump and distributor. Any helpful info is greatly appreciated.

Ok I recently pulled a 440 out of a 76 champion motorhome and I'm planning on putting it in my power wagon. I want to do a few small things while its on engine stand and I was hoping you guys would enjoy sharing some of your knowledge. I'm wanting to do cam and lifters, a set of headers, and...

I have a 78 power wagon with a 400 in it. When I changed the oil it was like I was draining black gasoline outta the oil pan(smelled like varnished fuel). The truck has been a barely driven farm truck for the past 14 or so years. The mechanical fuel pump has been replaced but someone installed...

I recently purchased a TM6 manifold from a fellow fabo member now I'm looking to see if anyone has a 4 barrel to go with it. I'm not looking for anything to spectacular as this setup is going on the 400 in my 78 power wagon. Thanks in advance for any advice and help with my search that I know...

I recently picked up a 78 power wagon 200 with the 400 2 barrel set-up. I picked a carter thermo-quad and 4 barrel intake from a 440. I was wondering if swapping out intakes was possible since they are both RB. Any info on whether or not this is possible would be nice along with pros and cons...

Well I just received my blastcabinet today. I'll put some pics up when I get home from work. Im ready to test her out on some parts I'm trying to sell so anyone that's interested let me know and I can blast them and paint them any color you want as long as its black haha.

Its time to start selling some of the parts from this car that I don't need. It's a 318 car that was for the most part complete when I bought it minus the bucket seats. It's a darker green with all the windows intact except the windshield has a crack in it. Hood is in good shape as for the rest...

I'm looking for an 81-93 W200 for sale near south central Illinois. Prefer it not to be mint condition just looking for an old fixer-upper. If anyone has one or knows of one near by any info would be much appreciated. Thanks!

I have for sale a Driver's side remote mirror from a 73 Dart Sport. Mirror and glass are in real good shape. The mirror is located in 62049 Central Illinois. I'd like to get $40 plus the ride. Thanks for the ad FABO.

[SOLD] I have a 68 cuda 7" brake booster in good shape but needs rebuilt. I'm located at 62049 south central Illinois. Looking to get 100 plus shipping.