Search results for query: *

ok guys been having trouble getting my combo to run well. I have 3 different carbs lying around and just can't seem to be the right combo together. My setup is a stock 1976 RV 360bottom end, Eddie rpm heads, lunati voodoo 226/234 @.050 lift 494/513, rpm air gap intake, stock electronic ignition...

I have a nice set of Crane adjustable rockers, shafts and pushrods. They were pulled from a running motor. Everything looks to be in great shape. $500 plus shipping Located in Buckeye Lake Ohio

I had these seats in my 1972 Dart, they are used but great shape, no rips or tears or worn spots. They recline and flip forward for rear seat access, I have universal sliders and brackets on the bottom that will go with them. Seats are comfy I drove 7 hours in them and was fine. Looking for...

I have a Door panels and Seat covers for Duster, I believe it will fit later dusters and dart sports 1973 1974 1975. Door panels and covers are custom made to look original but are not exact. good quality vinyl all black. I also have the rear divider and rear package tray with the cuts in it for...

I have a pair of A body high back buckets, need recovered foam isnt in horrible shape, have the tracks and plastic backs. I can ship but wont be cheap, $350 located central ohio, ill try to get pics up soon. Can pm me and get pics sooner

This is a custom made spoiler from triggerman on hear, I bought for my car, sanded and painted it satin black, but decided no to use it. I havent drilled holes or anything in it. $100 plus shipping Located central ohio

Up for sale is a very rare piece that I have decided I will never build and want to see it get used. This is a true 1970 date coded 5-25-70 block and dont not have a serial number stamped on oil pan rail. The block has been fixed see pics, it was done at Columbus Col-Weld which is very reputable...

-nice set of x heads I took off my 360. They are date coded 1969, they have not been ported,long story but heads should be bolt on ready, I ran them for over 3000 miles and no problems, these have had new stem seals and Comp Cam valve springs installed when I built motor. I was smoking very...

I installed new heads on my 360 motor and I have some blueish smoke coming from my exhaust, which I know is burning oil. Give you some background, i changed out heads because i was using a qt of oil a tank of gas. I talked to the guy who built the motor and he said that the heads probably needed...

I have up for sale a mild built 360. Motor is fresh, been started on engine stand. Has .030 Keith black 190 pistons, 1969 X heads, new Comp cam .484 nostalgia plus cam with matching springs, edelbrock air gap intake, has stamped steel rockers, direct connection valve covers, new fuel pump...

I am selling my xheads that came off my running 1969 340. I have upgraded to Eddie heads and no longer need the x heads. Few years back had the heads gone through, new springs have maybe 1k miles on them, prob less. These are ready to bolt on and go. They come with the rockers, only imperfection...

Ok long story but I had a 360, .060 built with x heads, KB pistons kb190, comp 20-671-4 (.484/.484, 284/.291 duration), airgap intake, stock crank, everything has been balanced. Now I came across some Edelrbrock 6077 360 heads I want to put on it, I am worried that It will be too high of...

I am looking at purchasing these for an LA 360, Im running a Eddy 360 heads, not decking block or anything. Any idea of what compression itll make? Also these have rods on them and was set up for a magnum motor, will rods and pistons interchange on la to magnum? Probe SRS 12351-030 piston...

I just bought these sheets from Jegs the other day, did not use as much as i thought I would, also will include some leftover dynamat tape, on my dart I did most of the trunk and floors and rear deck with 4 1/2 sheets $200 plus full box cost me $500

Very nice hood, no major rust, there is a little surface rust on the bottom see pics, corners arent bent up, no damage of any kind $100 Located East of Columbus Ohio

I have following items for sale, im located just east of Columbus Ohio -Power brake booster bracket, pedal rod and some fittings, this all came off of my 1972 Dart $40 -Accelerator throttle cable $5 -K&N 14" complete filter, comes with a chrome base plate, needs cleaned but still good $50...

I have the following interior items, would be willing to ship anything -Green Kick panels nice shape $35 -Green Plastic pillar covers , one is cracked but can be glued as it is all still there in one peice $35 - Cerullo Black vinyl bucket seats, great condition, no tears or rips reclining...

I have a very nice rust free hood for a Dart or Dart Sport. It looks as originally it was green and now has been painted pink. comes with hood bolts and front latch pieces $150 Central Ohio

I have a 904 trans with converter, flex plate, and throttle and kick down linkage for sale that came off a Dart with a 318. Has pretty clean fluid in it, the car it came off of was running and driving but I cannot verify it, thats what previous owner states. I will sell complete package $300...

Up for sale is my fathers 1969 Dodge Dart GTS 340 all numbers matching project. The pics I have below are before we started the restoration and now he has too many projects and some have to go. Car is complete with ORIGINAL Numbers matching 340 that has been redone, correct intake, manifolds...

I have for sale of good shape interior pieces -Green Kick panels for dart duster scamp valiant dart sport demon etc $40 -Pair of Green a body visors no rips $30 -Green Pillar trim, one piece has a crack but I can glue it together before shipping $30 -Green steering wheel 3 spoke with horn...

I have up for sale a nice 727 trans for a small block with reverse manual valve body. I was told it is a TCI valve body but I do not know for sure. Converter is a 2500 stall and not sure of brand. Trans and convert is said to have less than couple hundred miles on it due to it being rebuilt for...

this bellhousing is what you need to adapt a Viper or LS1 t56 six speed trans to a small block mopar!! I have sold trans and do not need bellhousing any longer comes with the scatter shield and bolts also have new t56 spicer yoke $50 and Mcleod hydraulic throw out bearing $200 $400 located...

These headers have never been installed, great shape and have been in storage, comes with header bolts and flange kit so you have everything you need to install them. $325 can ship at buyers expense Located central ohio

I have a nice new rechromed front bumper for a 70-72 duster, scamp, valiant, chrome is in great shape, been in storage and has one spot that looks like something is on the chrome its not rusting just maybe where is was laying on something? Comes with bumper bolts $250 I have brand new set of...

Brand new patch panel for rear quarter on passenger side for a duster or dart sport, this is nice quality panel not cheap flimsy chinese stuff. Its brand new still in the box $100 plus shipping Also have set of 1970-1972 dart duster marker lights in great shape, no cracks etc front and...

I have finally broke down and decided to sell my original bench seat and matching rear seat. The front seat has had new padding added to make it niced to sit on, but retains the original black vinyl and black and white diamond cloth inserts. No rips or tears, vinyl is still soft, head rests are...

I have up for sale a complete front street and strip Suspension made by Reilly Motorsports. The kit came with other parts I bought and have no use for the suspension as I already have the same kit on my car and love it! The kit was bought for a 72 duster / dart sport project and the guy lost...

I have up for sale a used t56 six speed transmission, i have had it in my 1972 Dart for last year and since then have recently upgraded to T56 Magnum for different gearing. Current Gearing Tag ID = 1386-000-011 GM Aftermarket 450 Torque Rating 1st 2.97:1 2nd 2.07:1 3rd 1.43:1 4th 1.00:1 5th...

I have a few parts up for sale that I no longer need and just taking up space. - Full 2.5 exhaust headers back for 1972 dart pre bent with jegs flowmaster like mufflers, stainless tips, was on the car with stock leaf springs bent for over the axle fit great just went with coil overs $300obo...