Search results for query: *

I don't get some of u guys,Aported iron head will ping with 10.5 or so to 1.My 69 roadrunner I had up to 1979,and ran it on 93 octane and it had 10-1 from the factory, rebuilt it milled the heads 030. ran 40 degrees total with 906 heads with over 300 duration in a 383 Never made a ping,never...

Big deal,I'll use .051 head gasket and gain 7cc's and get the c0mp down to 10.3 and run at 34 degrees, and use the lunati 242/252 cam if it still rattles,I'll get the chambers polished and add another 4-5cc, if it still rattles I will run E85 if it still rattles I'll burn it or use it for an...

lookin all around for the 313 lunati then I find it ITS A Hyd Roller!!,don't want to spend 100$ springs,460$ roller rockers,300$ for the cam,250-450$ for the roller lifters! For 1300 I could run a street solid roller and make 700 hp easy,think I will go with the 200 bucks for the flat tappet cam...

yes may give the stamped rockers a whirl,as they are set up right! spaced to be right on the valve stem,shimmed under the shafts for proper height,,and have had custom pushrods made,they are as light as possible and I have low pressure springs 120 on seat but only 340 open,so see how it goes...

Ok listened to a lot of mombo,jumbo from u guys but ,I think I know best from reading gobs of stuff from people who Know!!! I'm going to try a hydraulic cam first,tried many progams,the camquest,quarter jr and others and if I go up higher than 260-265@050duration the solids definitely have the...

OK going to ask You one question ,and then call lunati,and comp and get their ideas....Which Flat tappet Hydraulic cam would you try in my 470? with the ported and polished heads with 10.4-10.7-1 compression. I will gear and put the right converter in it. If I make at least 525-550hp this thing...

I don't really need it I'll try to sell it 4 you,if u want, I'm sellin a few things for my friend anyway so If I can help and make 20 bucks 4 the engine fund what the hey.....Since your so close We can save on the shippin or I can give u the info and u can do the deal,its not always about cash...

Ty I'm new here and don't really know how this works . If your trying to be funny,get lost,if u r interested in my manifold be nice..........G from NYC ....

Dam this is messed up,wish I knew more about this site,Anyway bad news the torker is SOLD this morning SORRY,But have access to 2 two Street Dominators as good or better on higher HP engines,Chk Hot Rods Mopar 383 manifold test Part 1 and 2 and compare numbers they torker,street dom,M-1 all...

{Edited by staff} Per forum rules you must post an asking price when placing an ad. Please familiarize yourself with the FABO Classified Section Rules

Do you have one ? How Much know someone who needs one....Gene

Hey your no dummy that's smart stuff,I don't have many taxes as I'm on social security disability,and have a dis abil pension,not much taxes to pay there,I owed 100,000 to IRS and they felt sorry for me because wife is disabled NO benefits yet,and I got creamed by a truck in hosp 5 mths,while on...

If I knew where and when to put them I would,My bosses used to hate my reports,for the same thing ,let my wife handle my responses for now on ...........G

no,I did it myself you made me feel dumb.But anyway the hads are what I got.Unless they sell do u think I should have stayed with the 400 instead the 470,not enough head flow? Any way I rechecked the clearance in the springs and I can get 565 lift and still have 055 thou left for clearance don't...

No more heavy font,Mope. Anyway Rumblefish I bought the heads bare done, for the price of a solid roller camshaft,and the ferrea valves, springs,machine work, rest didn't kill me, but if I had as cast 906's it would have cost at least 1,500 or more. I did good,real good.So believe me, I'm a...

Did you gets the pic's I sent how did u like them? Let me know if u need anything ......Gene

DID you get the pic's I sent? How'd u like them.........Gene

Could also use a 383,400 Victor or super victor for race engine 150.00-175.00 ???

ANYONE HAVE A M-1 FOR A 383,400 Big Block mopar single plane for around 150.00 ANYONE.............

HEY Rumble where u live? I'm on rego ave off rustic rd U know rustic across from CVS By johnnys hambergers(never went there)

Rumble, I'm going to go from a .022 shim to 051 or even 056. MULTI-SHIM cometic gaskets so maybe 8.5 cc more that will lower the Ross piston compression to about 10.4 with octane boost or E-85 no problema, or get a barrel AVGASS 104 by me and add lead do that anyway 2 caps per 15 gal no sweat

RUMBLE, FISH heads done and done well flow about 285 @ 550 lift new best of everything what a port job....

Moper ,listen the only thing waiting to get done is my Guys ACE Crankshaft,DeerparkNY he want my piston,rings he has rods and crank,he going to balance cut the mains down to 400 size,check piston height with fods on crank so he will know how much to take off the weights rods already BBC he gave...

HOW I Leave THAT out.DUH! intake,studs,wahers,nuts,and Coil 150.00 plus shipping if still interested give me zip code so I can get proper estimate on fed-ex Me pay insurance. Want pics give email address....,Very,Very nice intake recommend a 1 inch spacer if fits under your hood,phenolic best...

OK ALL THE PARTS by tomorrow afternoon,don't want to miss my TV show.........

Guys,have a really,really nice 383 B Block TORKER intake just media blasted,comes with studs washers,nuts AND A FREE 60,000V Coil that bolts in front where the tapped hole are. this is a modern New box like coil,looks nice and will put coil close to Distributor ,MSD low resistance Coil Wire...

Have a newly reconditioned 383,400 FORGED steel crank 10/10 polished,with chamfered oil holes, plus Newly bought Set of 383,400 Rods,balanced within 1 gram with Mopar Performance bolts payed over 700 plus shipping,SELLING NOW for 400.00 PLUS YOU GET FREE SETS of Main and Rod bearings CL-77...

Hi guys,what do you guys think of this cam in a 470 stroker with fully ported and polished 906's milled 040. with either 9.8 compression or 10.7 compression depending on witch Pistons I go with.And is the 10.7 too much for a 93 octane pump gas,if I run 32-34 degrees instead of 35-38 CAM IS...

I am selling my 66 nova for a change used to be a mopar guy so decided on a dart,demon,gts a body any way the gts seems out of my price range although they are worth 40-55k settled on a dodge swinger 340 which has a value of 32-36k if equiped with a/c and 4 speed. now if you were to get a 318...