Search results for query: *

My 65 Barracuda resurrection is nearly complete. It is running beyond break in but has yet to move 1 foot under it's own power and that moment is upon me. I like it's stance as it is but it occurs to me that, beyond suspension assembly, no other adjustments have been made. In fact, none of the...

I am searching for an emergency brake handle. Just the plastic, I have rebuilt the mechanism. I need the headlight bezels. I have several pairs that are pretty well beat up. Rear window trim (what I call the trunk belt} All five pieces. I have two sets, 1 of average driver quality that I am...

...understatement... As some here know, I am nearing the completion of my 65 barracuda. Essentially stock build on a 273 with a factory 4 speed. Had to move out of my shop last October, then got sick (understatement). Anyway, brought her home and fired her up for the first time before illness...

Looking for speedometer cable for my '65 Barracuda with 273 and 4 speed. Thanks for the help, as always! GS

I am ready to fire up the 273 in my 65 barracuda. I have spun it over and oil pressure came up quickly just off the starter. Hooked up my timing light to do a static set prior to start up. The timing gauge on the block is behind the lower water hose! No way to see the timing mark on the...

This barracuda is a mildly built 273 with factory 4 speed and stock rear end. I am interested in what transmission fluid and rear grease to run and any recommended additives? Thanks to all comments! GJS

Looking to the end on the 65 barracuda. Still need: Trunk trim (NOS or very nice) E brake handle Air cleaner Trunk lid prop When I think of anything else, I will add it here. Thanks everyone GJS

The torsion springs have been off my 65 barracuda so long, I have forgotten how to install them. I would rather avoid damaging some paint so, thought I would ask here. if someone has pictures or a video they could post... Thanks to all GJSZ51

Snapped mine off at the block and need a correct replacement . GJS

Is there such a thing. Fellow down here has one he says runs but unknown condition. Is it worth grabbing up? GJS

Does anyone sell correct or use able fuel lines for pumpvto carb, 1965, 273ci barracuda

Searching for factory style single exhaust for 273 4 speed 1965 barracuda. All help and advice appreciated. Thanks GS

I am looking for some engine accessory parts to finish up my Barracuda with 273 and factory 4 speed. Coil bracket Distributor hold down bracket PCV valve cover grommet ( and line if preformed to carb base ) Accelerator cable Air cleaner assembly Also, if there is a source for wiring...

I have installed new front and rear brake lines and master cylinder. In need of the proportioning valve/manifold that all connect to. I am guessing I will have to fabricate the line from master to valve. I have no assembly manual so, a diagram or picture would be great. Thanks GS

ISO head light trim and the rear window trunk belt trim for my nearly complete '65. I am also interested in exhaust advice. The car is retains it's original 273 with 4 speed. I would like to install single exhaust as was from the factory. I am thinking it may be best to have my exhaust guy...

ISO a correct SBP right front hub for a 1965 Barracuda. The lug studs are wallered out on the one I have. I have purchase 2 that are for a different bearing/race size I am in Raleigh, NC Thanks in advance GS

Looking for a good SBP ( 5 X 4 ) passenger side front hub for a 1965 Barracuda. Thanks in advance! GS

I need the window mount for each quarter window for my 1965 barracuda. This would be the metal part and bushings the glass bolts to and rides in. Thanks for all help and advice. GS

average drivers or good for rechrome. no dents or bad pitting. 50..0 each = freight from 27607

I have the Keystones that were on my 65 barracuda when I bought it. They are 14" in the 5 x 4 bolt pattern. Make no mistake, they are nowhere near show quality but are restorable. One is in need of repair at a stud hole. They had 245/60-14 tires mounted and I used them until I installed the Coys...

Quick question... Can I run a 235/60 15, with a 4" backspace on a 65 barracuda?

Needing the quarter window glass mounts assembly for my 65 barracuda, in good condition Thank you GJS

I need a replacement 5x4 (sbp) right front hub assembly for my 65 barracuda Thanks GS

I restore the grill for my '65 but broke (bolt tabs) it on assembly. In search of a restorable replacement. Also could use quarter window regulator assemblies and window mount. Thanks in advance! GJS

Finishing up the nut and bolt restoration on my '65 and still in need of some parts: gas cap dash trim sun visor chrome trunk trim (all 5 pieces) passenger side inner fender splash shield 4 speed shifter boot clutch rod boot clutch fork boot drive shaft boot 273 4v accelerator cable and...

Does anyone have an install diagram or picture of bumper jack placement in the trunk of a 65 barracuda? Thanks in advance...

Nearing the end of a rotisserie style restoration. 85K original miles. 273, 4 speed. Non original colors http://i307.photobucket.com/albums/nn303/GJSZ51/1965%20Barracuda/IMAG0374_zps6c854fbf.jpg http://i307.photobucket.com/albums/nn303/GJSZ51/1965%20Barracuda/cudaclear1_zpsc3d379c4.jpg...

Still need all dash brightwork for my '65 Also need the trunk belt trim and hinge covers Thanks in advance GJS

Looking for all 4 pieces of dash trim for a '65 barracuda.

Rounding the corner on a nut and bolt restoration of a 65 barracuda. She is a 273 with factory 4 speed. Not original exterior or interior colors. still missing few pieces. Need weather to warm a tad to complete paint. I am in Raleigh, NC GJS www.garyscalf.com