Search results for query: *

For sale is a 1968 Plymouth Barracuda that has been restored and modified to be a great cruiser, with a 383 6-pack and 4spd. Currently registered and insured in CT, I have ownership paperwork going back to 1968 (originally a /6 auto). I purchased this vehicle in the fall of 2003 and began its...

For sale is a 1968 lower dash pad set in good condition for a driver, simply dye it to match your interior! As shown in the photos, this 3 piece set includes the lower left dash pad, the lower right dash pad, and the steering column cover. The mounting nuts for the dash pads are also included...

For sale is part 2770378, variable wiper switch, with knob and mounting nut. Knob has positive stop(clicks) and sweeps through the rheostat. $65 shipped in the 48 states, payment via PayPal. Located in Manchester CT As shown in photos

$35 for the pair, shipped via Priority Mail from Manchester CT. Payment via PayPal As shown, black!

Small block style, $40 each plus shipping from Manchester CT, payment via PayPal As shown, includes whatever mount parts and hoses are in the photos. The pump with the solid pulley has a slight dent in the bottom of the reservoir. Power Steering Pump #1 solid pulley Power Steering Pump...

For sale is a pair of dust shields for a 1973 and up A-body. Condition as shown. $35 via paypal, with USPS Priority shipping included from Manchester CT.

As shown in photos, this includes the 4 hubcaps. These will be great for a driver! Hubcap in lower left has some dings/dents/scuffs around the center section, shown in photos. The rest are dent free but may have some small scuffs. $65 via paypal, shipped from Manchester CT

The following electrical gremlins have been torturing me for over a month now, and I've been searching out old threads for research and troubleshooting but I'm finally stumped and starting a new thread. I can't get the instrument cluster to illuminate in a 1968 Rallye Dash --- 4-17-17 I'm an...

As shown in photos, this is a satin finished 3-spoke horn ring #2925442 w/ center button, correct for 1967 and 1968 A-body. Good for a driver! As shown in photos, this includes the horn ring, internal center, and the removable black center button There is a small hairline crack on the left...

For sale is a 1968 lower dash pad set in good condition for a driver, simply dye it to match your interior! As shown in the phtos, this 3 piece set includes the lower left dash pad, the lower right dash pad, and the steering column cover. The mounting nuts for the dash pads are also included...

As shown. Barracuda glove box trim w/ mounting screws $25+ shipping Barracuda glove box door $25+ shipping Both pieces together $40+ shipping Payment via PayPal, please send a message!

Part number is correct for 1972-1973 engine 340 cid. Date stamp 7-28-72 As shown, a little hay from the barn can be included at no extra charge! $40 plus shipping, payment via Paypal Please send a message! Located in Manchester CT

Set of exhaust manifolds, part numbers reflect 1967-1968 Dart - Barracuda 273 & 318. Passenger manifold has bolt through heat riser. $35 plus shipping for the pair, payment via PayPal Please send message! Located in Manchester CT

I bought this car back in November 2003 and just came across some (gasp) Polaroid photos of the first day I had it, when I immediately began taking it apart. It is just weeks away from being finished, and I'll be updating this thread with pictures as I scan and upload them. This Barracuda...

As shown, part #2771653 $75 shipped Priority Mail, paypal OK Please message or PM for email. Located in Manchester CT

1967-only, uses threaded connector for speedometer cable $95 shipped via Priority Mail, paypal OK Please email or message! Located in Manchester CT

Removed

With toothed adjuster (no locking tab), small bolt pattern. Minor rust spots, no wheel studs. I'll even include one A-7 wheel bearing w/ collar, new in box federal mogul. $65 for the pair + shipping from Manchester CT

For sale: 1967-1968 horn ring 3 spoke partial circle #2925442 Good/fair condition $20 plus actual shipping Located in Manchester CT

For sale: Small block right angle 90* oil filter adapter with bolt, #2951995 $45 shipped - located in Manchester CT

I'm looking for a functional license plate lamp housing for a 1968 Barracuda. I have the lens, gasket, and wiring pigtail. Please send me a message!

For sale is a 120mph speedometer for a 1968+ Barracuda. This speedometer accepts the clip-on cable (not the screw on). The needle could use a fresh coat of orange. Overall the gauge is in good condition with minimal flaking/pitting/rust. $125 shipped via Priority Mail, payment by USPS money...

1967-only Barracuda 150mph speedometer gauge with trip odometer. Speedometer uses screw-on cable. Comes as shown with the entire dash cluster, performance (vacuum) gauge, gas, temp, alt, pressure gauges. Bottom right corner of the cluster is cracked in 2 places. Lenses are clear on the gauges...

1967-only Barracuda 150mph speedometer gauge with trip odometer. Speedometer uses screw-on cable. Comes as shown with the entire dash cluster, performance (vacuum) gauge, gas, temp, alt, pressure gauges. Bottom right corner of the cluster is cracked in 2 places. Lenses are clear on the...

120mph speedometer gauge out of a Barracuda, used. Minor surface imperfections, still functions. $40 shipped USPS Priority in the 48 states, payment by money order. Located in Manchester CT

1974 Dart Sport 340/416 with 727 and 4.10 gears Located in Manchester, CT $11,500 obo Please send me a PM with any questions 63,000 miles on the odometer with less than 1,500 on stroker engine/transmission combination Factory sunroof & fold-down rear seat, buckets, console shift...

Any interest in somebody possibly repopping them in the $175-225 range? Not sure if the headlight buckets would be on them or not yet...that is currently undecided. Just want to see what interest there is before I tell them to make a mold...

Last year with a dying TCI 3400 converter/ 727 tranny I ran a 13.23 @ 105.xx with a 1.987 60ft.... This year I have a Dynamic 3600 converter with a more than healthy 727...(thanks to moparts member "moper" for the trans build & bodywork!) Hopefully I can hit 12s this year, that's been the goal...

Yanked the engine out last week, and started tearing into the bay since I had the day off... I removed the brake lines along the firewall and other hoses, did not get to the wiper motor or steering column yet. I hit the upper inner fenders with Aircraft Stripper, and here's the results!

I currently have a 1968 Barracuda with no engine, and the early style v8 K frame. I was looking into getting the Schumacher kit for the swap since I am familiar with their products, but have heard that the 4spd makes things a lot harder. The car is currently gutted w/ no front clip, so it is...