Search results for query: *

Hey guys my build I just finished is a dodge 360 these are the specs of the motor 360 bored .040 over to 367 cubes KB 107s stock crank and rods crank turned .020 over Heads are cast iron 2.02 1.60 ported and flowed to the max Holley strip dominator intake high rise Holley street avenger...

Hey there having a fuel pressure issue I get about 6 psi when I start up my motor, this is a carter mechanical pump on a 360 motor, now when I go out and drive I have sputtering issues I barely got home because it's starving for fuel, have s full gas tank and my pressure drops to zero and my...

so I was cruising today on the highway and I heard a thump I looked at my gauges and my oil pressure dropped right to zero!! Shut it off and towed it home, I pulled the dizzy and the rod and gear that runs into the oil pump to see if that had broken and it is not, this motor is rebuilt with...

i recently swapped out a 8 1/4 rear end for a 9 1/4 with posi and 4.11s. I have a 727 transmission and when I bring the vehicle up to 3200 and above it vibrates like crazy, feel it in the steering wheel and when the wheels are turning every 1.5 seconds seems like a vroom vroom that's when the...

hey there so I installed a brand new externally balanced TCI heavy duty sfi approved flexplate into my dodge 360. I have been having trouble with the stock flexplate shattering under load condition so I spent the extra cash and bought a heavy duty one. Now when I put this in and lined everything...

hey there I'm looking to do a cam swap in my warmed over 360. It is as followed .040 bored 360 block zeroed 2.02/1.60 valved heads ported and polished 65cc Intake Holley strip dominator high rise 670 Holley street avenger carb 3.58 stroke crank Kb107 hypereutetic Pistons Chevy HEI...

360 block 4.040 so 367 cubes 3.58 crank and 6.123 rods both 0.40 oversized Kb107 pistons and moly rings 10.5 to 1 compression Comp cam XE275HL 287/275 0.50 is 231/237 lobe 110 Holley strip dominator intake Holley street avenger 670 carb Cast iron heads 2.02 1.60 valves 65 cc combustion...

I have a 360 I juiced up quite a bit 10.5 to 1 compression comp xe275hl cam Flow tech headers with a magnaflow dual inlet and dual outlet muffler turn downs dumped at the rear axle 2.25 pipe all the way through. Doesn't give me that nice tingling sound from the exhaust any suggestions??

I have a 360 In my 74 d 100 My build is as followed .040 bore .040 crank and rods 3.58 stroke 4.040 bored block Xe275hl comp cam .525/.525 275/287 Kb 107 pistons Stock rods Stock crank Holley strip dominator high rise intake Holley street avenger 670cfm Stock heads 2.02 Intake...