Search results for query: *

W5 heads Fresh valve job and surface job Mopar intake manifold I have shafts and rockers I’m throwing in that should work. You will need stands. I don’t know what ratio rocker. I was told 1.6’s Heads have been pressure tested and are ready for valves and springs. The part numbers are in the...

Mopar R block 48’ degree lifters 4 bolt mains Wet or dry sump 340 mains Old nascar block Deck height is 8.990 4.065 bore that is ready for pistons $1600

Yes this is an R2 race block Small block that was made just before the R3’s 48 degree bushes lifter bores 340 mains Siemese bore Roller cam bearings I have a low deck timing cover for it Bore is 4.175 still have the cross hatches and should be able to run as is. Deck height I measured was 9.10...

Brand new Mopar w2 heads. P4532693 open chamber heads. $1200 plus shipping and PayPal fees.

Nice used Edelbrock small block Mooar air gap intake manifold. I’m switching to a single plane. Has mild port work done by Hughes Engines. $400 plus shipping. Buyer pays PayPal fees of 3%.

I have two NOS 50mm cam cores for small block mopars. These are new and need to be finish ground to your specs. Mopar P5007932 I’d like to sell these are a package of two. $200 for both or $125 a piece plus shipping and PayPal fees.

P4876671 R3 block 48’ Siemese bore 9.20 deck height New $3000

P4532435 R1 block 48’ 9.30 deck 4.060 bore Has engine mounts 4 bolt mains No cam bearings 340 mains Takes 360 pan Looks like this was machined and then never assembled. Needs to be cleaned up as it’s been sitting. $1600

P4876631 Timing set for low deck Race blocks Comes with seal and gasket I have two available $300 each

I have two sets of Mopar P5007708 W2 heads 48 degree 47 cc open chambers Long valve $1000 a set

Like new with only 8 passes 75mm S475 T6 twin scroll Part# 171703 5’ to 4’ adapter included T6 flange included 1.32 A/R What you see in the pictures is inclined. $500

W7 small block heads 2.18 intakes 1.60 ex Fresh valve job Jesel rockers Titanium spring keepers Locks and retainers Springs Chapman cnc ported These have the injection ports which need to be plugged as they were run on a spring car. I don’t have flow numbers. $2,200 for complete heads or...

Selling my personal R3 W8 engine. Life changes and I’ve decided to go a different route on things with my car. -R3 block P4532907 -Siemese block 4.145 bore -Bryant crank 3.3ish stroke (I haven’t took it out) -9.00 deck height -W8 heads fresh from Brett Miller -2.18 in, 1.63 ex valves -Jesel...

Used adapter wheel made by JW to bolt a power glide up to a small block Mopar. $125 plus the ride and PayPal fees.

applications. New $80 I have two 904 deep stamped tranny pans. $25 each I have three small block roller cams for sale. $175 each see cam specs I pics. I can pm pics of cams if interested. (2 cams sold ) 904 shorty tail shaft conversion (for dragster?) cool piece has gm spline shaft. $400 I...

ACC Boss Hog Model: “Outlaw” Wild Boar Stall 3500-4200 rpm 727 transmission 10 inch Part# 54794 Anti ballooning This converter was bolted in and drove around the block and was to much for the customers street car. Practically brand new in the original box. Sells for $691 from Jegs $450...

2 Brand new NOS blocks R blocks P4532435 Tall deck Bore is under 3.900 Two bolt main Sonic checked .300” thrust walls Never been machined or touched! These are as NOS as you’ll find! Ad your 4 bolt main caps and build. $6,800 for both or $3,500 each. Can ship via Fastenal for under $200 a...

Hello, I am beyond frustrated with my cursed 1970 Dart. This thing has fought me the entire way. The car has 65,000 original miles and started life as a 6 cylinder. When I bought the car the motor was removed and the v8 k member was already installed. I had a battery draw and found the horn...

New P5007742 Big block heads See pic for description $85 Price is plus PayPal fees and shipping

Two sets of forged pop up pistons One set looks like MGD & the other TRW 4.070 bore block 340 stroke 3.310 Both sets Come with pins Chrysler connecting rods Compression should be around 12:1 $300 Price is plus PayPal fees and shipping

Used Fluidamper For small block Mopar internally balanced engines This is a used part used for start up only. There is some aging on the damper from sitting but it’s practically brand new. Price is plus shipping and PayPal fees $220.00

Nice used solid roller cam with lifters Small block Mopar 273-360 engines Cam and lifters are used but in great shape! .260/.266 duration @ .050’’ .628/.638 lift with 1.6 ratio rockers .589/.598 lift with 1.5 ratio rockers 110 degree lsa This is an older grind. Those were the numbers Comp...

Fresh set of Brodix B1BA heads New Manley valves 2.05 intakes 1.65 exhaust Fresh valve job These heads were originally done by sd-concepts.com for a boosted application. 68cc Port matched M1 intake manifold These heads have a dual header flange pattern, one is the stock LA pattern...

Hello, I'm needing a bit of help with a 1970 Dodge Dart I'm building. A little history on the car is as follows. Its an original paint, body, 65,000 survivor car that was a 6 cylinder car. It's been converted to a v8. It has a mild 408 stroker in it. MSD 6al box with a Blaster coil. MSD...

Nice W5 topend Start up time Only W5 heads Mopar M1 intake manifold Norris 1.6 ratio rockers Polished sheet metal valve covers Bronze roller distributor gear MSD distributor New W5 headers 1 7/8 with 3 inch collectors equal length for A-body I don’t know what the springs are...

Mopar M1 W2 intake used $180 Edelbrock Victor 340 W2 intake $250 Mopar small block W2 heads These need to be finished They are some old school experimental heads. Someone put a lot of time into these heads. They will flow really nice when finished. They’ve welded and moved the ports as you...

like new milodon distributor gear. Bronze for roller cams $75 firm

like new less 1000 miles on assembly! 345 ci .020 over 340 The rotating assembly has been balanced Eagle forged 3.331 stroke crankshaft 340 mains Eagle H beam rods 6.125 length Small end is .927 and big end is 2.100 Part# Crs6125b3d Custom forged Diamond pistons 4.060 bore...

ATI damper Small block mopars internally balanced. Bolted on and used for engine break in only $250 firm Buyer pays PayPal fees Will ship usps flat rate for $14 Thanks!

Brand new Fit magnum heads Light shelf wear (see pics ) $225 plus shipping