Search results for query: *

andrea68 re your ride hight on yur 68 .you cannot set the ride hight with no engine,trans.in the car all weight must be on the torsenbars before you can set ride hight.even if ride hight is correct when yu jack up the car with the front wheels off the ground ,the suspension becomes unloaded and...

hi fellas just my 2 cents re the fuel senders had 3 new ones in my 68. f..... with that thing a dozen times ,still out by 3 gallons .Chrysler 73-9 ohms most aftermarket stuff 80 12 ohms .is that a big difference. there is a guy in newyork who will rebuild stock senders ,don,t know if that will...

hey bob re the 34 deg. timing I have the Chrysler new dist.and yu need the key kit to change total ,that's all the timing I can get now,will work on that when get a chance .how much total should I run .how fast should it all be in. thanks:burnout:

hi fellas re the 440 with ly rods stock steel crank ly rods with all the business ross forged flattop pistons 590grams without the 990pins.edy rpm heads mopar 661 solid cam ,hughes roler 1.6 rockers,ras holdowns,smithbrothers pushrods.edy duelplane,850 demon .eng seems to make good power...

I would put a spacer between the spring mounts but if you go more than .5 in you will have to make a longer driveshaft:burnout:

hi fellas have a question that allyways irkes me re 440 ly rods I hav seen articles where those rods hav been turned to 7000 and did not break in 440 motors .I hav a440 in my 68 cuda that has ly rods. had the car to the track went 12.10 and I think the car will go 11.60.now I shift at 5500 .was...

hi guys good talk on the centerlink when I took out the centerlink I left the tirods attached to both ends,when I tried to install it did not want to go in so I flipped it over.it went inplace but when all the links were tightened it would hit the passanger side torsenbar and the centerlink...

hi guys just to clear up the mystery re the centerlink on 67to69 a bodys some guys on this website said the centerlink will go on eighter way .r&r that thing 3 times if the center link is on wrong the inner tierod on the passenger side is to high and hits the torsenbar.so the center link will...

hi guys been reading your posts on the borgerson stering box .my 68 cuda has a 440 rb engine .the only header that will fit the rb engine for power stering is the surmacher .the pipe size is 1.5/8 to small once you go past 500hp.want to put 2in tti,s on can I do that if I use the borgeson box...

hi guys thanks for your quick reply to my mystery .it looks like it will fit both ways. keep your stick on the ice. :burnout:

hi guys. have the stering linkage out of my 68 cuda had to remove the oil pan .now putting stering linkage back .it seems like the center link will fit on the idler arm and the pitman arm eighter way.not sure which way it was when I took it off.can it go on eighter way.anybody have that problem...

hi guys thanks for the imput on the pro rachet shifter on my 68 cuda I finaly completed the install took 2 weeks lol. I retained the factory console and factory brackets.but had to fab some alumum shifter mounting plates and 2 new alumun console covers painted them like factory argent silver.the...

hi every one. new guy here have a 68 cuda fastback 440 727 that goes 11.60 .going to install a b&m pro rachet shifter .the car has a console anybody do this install.:burnout: