Search results for query: *

76orangewagon - What key/switch setup did you use for that?

Installing an aftermarket tilt column is the plan just thought since I'd be doing some wiring anyway, why not. I'm looking at an Ididit universal column.

I like the cleaner look of a keyless column so I am thinking about moving the ignition switch to the dash (or ? ) on my '71 Dart. Does anyone out there have any advice on completing this move?

PM'd for price quote.

Not sure how big the controls are but I though it might be neat to fab up a way to hide it in the ash tray.

Like these? http://www.stockinteriors.com/headlinerkit.asp?Itemid=21352&MakeId=7&ModelId=136

You might look into something like this. It could be mounted under the front seat. http://www.classiccarstereos.com/product/Secretaudio-SST/SST-System.html

Gregn96cuda I pm'd you about that linkage.

Any advice would be appreciated.

I also have the rod that connects the z bar to the transmission.

It's a 1971 Dart Swinger with an unknown year 225 and a 1974 904 transmission. The linkage is also from a '74. I'm thinking I can use the factory setup from the carb down to the swivel piece that mounts on the manifold then attach the cable where the long rod would go. I'll add pics tomorrow.

I am having trouble figuring out how I'm going to attach the kickdown on my Dart. It's a single barrel 225 / 904. I have some of the original kickdown parts but it's not complete. I also have a lokar cable that I can use. Has anyone used the lokar with a Carter single barrel, and if so, how...

You have a PM.

As best I can tell, mine measures right at 52 3/4. This would be right in line with the 1973-1976 Duster Dart Sport with 904 and 8 1/4 from the above chart.

Hmmm. My 1971 Dart has an 8 1/4 (318/904 car). I was lead to believe it was original. Guess I need to research that.

retroron - How difficult was the fabrication to mount the universal? I'm floor mount as well and if it's not too involved, I may just go that route. Cuda Srt8 - How did you go about getting the semi custom column and what was "semi" about it? What sort of modification did you have to do to...

If anyone is interested in an Ididt column for their A body, I have a little updated information. I contacted Ididit yesterday and Derek Auten confirmed that they do have an A body column in R&D and best estimate is it should be available in 5-6 months. I was thinking about going with the...

Received the lens in great shape. Thanks!

Thanks. I have to old manual and was having trouble deciphering the wire locations on the plugs. Big-B-Barracuda's version was much easier to figure out with the lettered picture of the bulkhead connector.

Can someone please tell me where the top two wires on the far right column of the bulkhead connector go? Someone replaced them with what looks like a 2 wire lamp cord. I assume they go to the reverse lights or neutral safety. I traced them under the car and what is left of the wire is cut...

Yeah, I had about decided their only reason for being was to aggravate me.

Can someone tell me what the indentations at the rear of the pan are there for? I'm trying to put a new gasket on and every time I start to torque the bolts the gasket wants to squeeze out whet the indentation is. I used a rubber gasket and Versachem gasket shellac.

Information for JMoparts.com Domain Name: Banned for Suspected Fraud Registrar URL: http://www.godaddy.com Registrant Name: Justin Figgatt Registrant Organization: Justins mopar parts Name Server: NS41.DOMAINCONTROL.COM Name Server: NS42.DOMAINCONTROL.COM DNSSEC: unsigned Also found him...

Fast4406, you have a message.

Well I went out after work and got them lined up pretty straight. Loosened up the pivot and was able to bump the bottom of the glass back with my hand. Still need new rubbers but happy that it was a simple fix. However, the screw on the passenger side was not tight and didn't feel like it...

They both feel like they are mounted pretty solid. They swing open and almost closed with no wobble so I don't think there is anything broken. It almost looks like the bottom of the glass is slid slightly forward in the frame. Maybe try to loosen the pivot and try to nudge the bottom of the...

I recently bought a 1971 Dart and it looks like someone "fixed" the vent windows. Now I need to fix the fix. Does anyone have any thoughts on what they actually did? I know I'll need to remove the glass and fix the seal. The top of the glass also hits the chrome when you try to close them.

Glad to hear that this is a reputable seller. I ordered one yesterday and with the price being as low as it was, I was a little nervous about it.

1971 Dart that I bought for my daughter. We are building it together and it will be her first car when she turns 16. Going by the fender tag and vin, this was originally a 318/904 car. However, at some point in it's life, that was pulled and replaced with a 225/3 speed setup. I'd like to put...

Which parking lens do you have for sale? I'm looking for the LH lens for a 1971 Dart. Edit.... nvm. I see now. The pics would not load at work.