Search results for query: *

For sale, as I've switched to a QA1 / HDK setup, my original 68 K member assembly. - K member - front sway bar from PST - LCAs with welded reinforced plate - new polygraphite bushings everywhere, drop links, etc - 2 PST 1.02"torsion bars (not pictured) I can separate but would prefer to sell as...

Hi guys I'm running out of ideas here. I have a 68 Barracuda, with what seems to be the Variable speed wiper switch with push-in washer function (when I use the switch, i can push on it, I can rotate it with an "off" position, a first "on" position, and then I can keep rotating it as I wish...

Selling my front seat sliders, back panels, headrests, both driver and passenger sides. I've taken them apart, replaced the broken springs, greased everything, all good to go. I'm fitting racing seats that come with new modern low profile sliders so these should go to a new home :) 50$ for the...

Tires are gone to a friend so selling the wheels alone. They are 15"x 8" wide, 3.75" backspacing gloss black powdercoated Cragar V-5 steel wheels. Never drove with them, I had them on the car for 1 year just to move it around in the garage while building it. I've since gone with 16" wheels...

I am selling all the glass, regulators, brackets, trim elements for a 1968 Barracuda Fastback. It is all in great shape, I've taken the mechanisms apart to clean them, re-grease them, paint them in black. The trim is in ok shape, chrome looks alright, seals are ok for their age (although I would...

Hi guys I'm going with a different set of wheels pretty soon on the car so I'm putting these up for sale. I've never driven on them actually, they've been in the basement for 2 years and on the car in the garage for a year. Cragar V-5 rims in 15x8 (3.75" backspacing) bolt pattern 5x4.5" in...

For sale, rear 68 Cuda bench seat, disassembled, frame was sandblasted and powdercoated, vynil is in good shape, all chrome is there, backplate too, everything there. I would advise putting new foam in it before reassembly to make it like new. 250$ + shipping from Dearborn MI 48124, or local...

For sale, complete side glass assembly (ideally sold as a whole package) with front windows, main front door windows, and rear quarter windows, all with their mechanisms, brackets, regulators, new bushings / wheels, etc. I'll get more photos if required for those interested. For obvious shipping...

New from PST lower ball joints, never fitted. 30$ obo + shipping from Dearborn MI 48124 New also pair of front 1973 and up discs with bearings and all, and caliper brackets included. 60$ for the pair + shipping.

Stock diameter 318 LA small block valves (brand new) for sale. 50$ obo + shipping from Dearborn MI 48124 or local pickup

I took it out of my 68 Cuda. Heater with new heater core and A/C unit with radiator also. I cleaned up the A/C unit and powdercoated it. I have some hoses and clips that go with it. As far as I know, all works. I have also the OE style condenser that goes with it, as well as all new seals for...

I took it out of my Cuda, stripped it down to bare metal, powdercoated it and was planning to put it back together and back in the car but I'm going another direction with the car, so the rear seat is not going back in. It's black vynil. I can sell it as is or put it back together for you...

I took it out of my Cuda, stripped it down to bare metal, powdercoated it and was planning to put it back together and back in the car but I'm going another direction with the car, so the rear seat is not going back in. It's black vynil. I can sell it as is or put it back together for you...

I took it out of my 68 Cuda. Heater with new heater core and A/C unit with radiator also. I cleaned up the A/C unit and powdercoated it. I have some hoses and clips that go with it. As far as I know, all works. I have also the OE style condenser that goes with it, as well as all new seals for...

Testing the waters on this, as I will be removing my roof to finish welding my cage into the car, I might as well go for the full quarter panels rather than just the skins. If anyone is interested, I'm putting these up for sale until I finish welding my cage. Location: Royal Oak, MI Price ...

they were on the 7-1/4 rear end on my Cuda. Shoes are new, springs are good, levers are new, wheel pistons are new, adjusting screws too. I completely sand blasted and powdercoated the housings too. Asking 120$ + shipping, obo. Located in Royal Oak, MI. I can deliver locally within 30 miles or so.

i switched to a Proform carb so i'm selling my Edelbrock. It's new, comes with all the papers, manuals, stickers etc. 4 barrel, 750cfm, square bore, black powdercoated. I've only put it on my engine once but never run it, it has never seen any fuel. I have an electric choke kit and a jets kit...

As I'm rebuilding the car, i'm trying to make some space in the garage and basement, I hope the prices will be fair. It all comes from my 68 Cuda. It is all located in Royal Oak, MI 48073 Shipping can be arranged but if possible I would prefer local pick up in the Detroit area. Prices are...

As I'm rebuilding the car, i'm trying to make some space in the garage and basement, I hope the prices will be fair. It all comes from my 68 Cuda, all was running fine. It is all located in Royal Oak, MI 48073 Shipping can be arranged but if possible I would prefer local pick up in the Detroit...

As I'm rebuilding the car, i'm trying to make some space in the garage and basement, I hope the prices will be fair. It all comes from my 68 Cuda, all was running fine. It is all located in Royal Oak, MI 48073 Shipping can be arranged but if possible I would prefer local pick up in the Detroit...

I have a pair of brand new from P-S-T lower ball joints (for discs) that I bought for my 68 Cuda for sale Asking 50$ + shipping for them I also have a pair of brand new with bearings 73+ front discs, 5x4.5 bolt pattern, brand new. Asking 50$ + shipping for them. And finally I have a pair...

Hi all I have a pair of brand new from P-S-T lower ball joints that I bought for my 68 Cuda for sale Asking 75$ + shipping for them I also have a pair of brand new with bearings 73+ front discs, 5x4.5 bolt pattern, brand new. Asking 70$ + shipping for them. And finally I have a pair of...

As I'm rebuilding the car, i'm trying to make some space in the garage and basement, I hope the prices will be fair. It all comes from my 68 Cuda, all was running fine. It is all located in Royal Oak, MI 48073 Shipping can be arranged but if possible I would prefer local pick up in the Detroit...

As I'm rebuilding the car, i'm trying to make some space in the garage and basement, I hope the prices will be fair. It all comes from my 68 Cuda. It is all located in Royal Oak, MI 48073 Shipping can be arranged but if possible I would prefer local pick up in the Detroit area. Prices are...

As I'm rebuilding the car, i'm trying to make some space in the garage and basement, I hope the prices will be fair. It is all located in Royal Oak, MI 48073 Shipping can be arranged but if possible I would prefer local pick up in the Detroit area. Price is negotiable in a reasonable manner :)...

As I'm rebuilding the car, i'm trying to make some space in the garage and basement, I hope the prices will be fair. It all comes from my 68 Cuda, all was running fine. It is all located in Royal Oak, MI 48073 Shipping can be arranged but if possible I would prefer local pick up in the Detroit...

Hi guys i'm picking up a 70 A833 non-OD 4 speed trans on sunday for my 68 Cuda with 8.75 rear axle. i'm trying to get a driveshaft (Dynotech) built in time for Dream Cruise, and the guy needs the length of the output shaft 930 spline) out of the back of the 833 a body tail. I'm short on time...

Hi guys I've been going through internet and get all the information and its complete opposite... My car is a 1968 Barracuda with a 318 and an A904 auto trans. I want to swap for a A833 manual trans and as I'm getting the crankshaft balanced, they need the clutch assembly, which I don't...

Hi everyone Currently rebuilding my 68 Fastback. Came with a 318 and A904 trans, not checked the rear axle yet though. I want to get a bit more out of the engine which will be machined completely. It seems to have been rebuilt about 10 years ago looking at the crankshaft and rods condition...

Hi everyone So i'm starting a build thread for my Cuda project. Copy paste of my presentation thread : 1968 Barracuda fastback with a 318 and a 904 auto trans. Apparently matching numbers (will check), and an ex Missouri car so almost no rust on it. Most of the interior...