Search results for query: *

Does anyone know where I can get a set of 8-3/4 sure grip one piece side gears?

My housing is 18-1/2 “ from the face of the bearing hub ( where the backing plate would bolt on )to the center of the bolt at 3 o’clock and 9 o’clock

No Housing is shortened to 46-3/4" axles are Moser axles that I ended up trimming of about a 1/4 inch to get them installed. Had it rebuilt a couple of years ago, just now trying to put it on the road so not sure about the bearings

Ive been having some problems with my duster and what I thought was clutch slippage turns out its in my rear, Im being told my axles are to short and are not reaching the second set of splines in the rear, Im told there are two sets of splines in each side. Is anyone out there familiar with this...

I did leave out some details I suppose If the trans is in neutral things turn but very tight, and if I put it in gear I can’t turn the wheels at all. The trans shifts ok it goes into reverse and the forward gears using the shifter I have not been able to see what’s happening underneath while...

I have not driven since rear work was done While off the ground wheels turn and drive shaft turns but seems very tight. It almost feels like something is binding up like the e brake is on but I can push it around. I’m in the northern Virginia area does anyone know of any shops in my area that...

It is shifting and there are no noises like something is broken or stripped trans was just rebuilt by Ed Hartnett transmissions in Philly.

Yea everything in the clutch system seems normal and tech support at ram clutch say everything seems right

I am having a serious problem with my clutch and A833 4speed I have installed a new clutch kit and new flywheel and it disengages fine, I can shift it and start it in gear, but the car will hardly move, it’s like the clutch is slipping bad, I have an American power train hydraulic clutch kit...

Thanks a million guys A little looking and some splicing got it working like a champ

Where can I find these wires? the ballast resistor has been taken out, what color are they ? I hate so sound so simple which firewall harness do the come out of passenger side drivers side or middle Thanks

have a 72 duster and have installed a Mallory distributor and MSD 6AL box Currently the car doesn’t have a ballast resistor and if I wire both red ( big red and little red) together to the battery all works great except I can’t shut it off ( I temporarily installed a toggle switch) but if I...

I think other than the MOPAR sport wheels those slots have too be the most common thing on the dusters, valiants and demons I am going old school bench the carbs and centerlines, just a cruiser though, still messing with the height ...Thanks

I have a 1972 H code 340 duster, it has had many modifications to the suspension. I am trying to get a ball park curb height (? how high off the ground say the bottom of front bumper) I have a magnum force Tubular front chassis with rack and pinion and coil over shocks so most of the LCA...

I have a 72 340 duster with an 833 4 speed I bought an aluminum f body od and put in it with my original hurst shifter and now all my shift rods are about an inch short, all of them, is there a slight difference with the f body tail shaft? Is the shifter mounting plate different on an A body...

I am interested in your hinges Please let me know if you still have them and how to contact you Thanks