Search results for query: *

Rick, just got your post, but will double check my source and give to you!

I had zero luck with anyone having to "original" clips. I am in Palm Springs area for the winter, but had purchased some "generic" clips before I left. Won't know if they work till next May. Do you have the original rocket moldings for a 69 Barracuda? If so, please tell me the lengths at...

FYI: Pictures of the Dart/Duster Trim, with the slight angle on the ends to match the wheel well trim.

I am fairly confident the 71-74 Dart/Duster Rocker "Wide" Molding is the same cross section as the 1969 Rocker Molding. As such, I measured the Dart/Duster Molding and the Clips, and Alas....they should work great!

I will give Tom a call first thing! Thank you! Bill

Greetings! My Formula S Fastback "did" have rocker moldings, but since my painter tossed them about 8 years ago, and they are now not available, I had to go a different route. I've purchased a pair of reproduced 1971-1974 Dart/Duster "wide" rocker moldings, which I knew were too long. My plan...

And of course, why my wipers are wiping lots of paint and chrome and such....

Well well...My RH and LH Pivot's are the correct part numbers. Assuming the drive and connection links are correct, I need to find out why the wipers are not parking. Thanks for the tips guys!

Oh my....do I have a lot to learn~Thank you.... I did find the pages, and our page numbers match. I've printed them out and believe I now know the correct part numbers of the pivots and crank. LH Pivot S/B P/N: 2857935 Mine is 2857935 ! :) RH Pivot S/B P/N: 2857934 Mine is not known! :(...

I think that's a good idea.

Thanks: I've down loaded the entire parts manual, and after about 2 hours have not found any illustrations or other information regarding wiper systems. Looking in the Alphabetical Index, I was to find information on 23-67-2 through 268. However, nothing. Wiper Switch was to be on 23-67-160...

I'm guessing 36X32 Levis?

Nice rag!

I've had this car since November of 1971, when I purchased it from my cousin, who bought it new. The Park feature has never worked since I've owned the car, and I somewhat almost believe I remember my cousin saying there was a broken gear inside the motor. I am more concerned about the...

I appreciate you help! To be clear: When I shut off the switch on the dash, the wipers do stop! They just don't go park.

I would love to see your disassembly!

I'm not sure about the motor crank arm being removed. I would think the motor would come out with out disconnecting it, so I'd say no.... :) Regarding the connecting links, I've studied them too. In the Repair Manual, the link to the RH pivot appears to have the convex surface of the link...

Thanks for the quick reply. Pictures from top to bottom: LH Pivot Arm; RH Pivot Arm; Variable Speed Motor; Variable Speed Motor Crank Arm. Also: FYI: My Variable Speed Motor does not Park! I have to shut them off just past full stroke, and manually push wipers down. I also see your bushings...

Is there a limit on the size of the Pictures? It is giving me the following message: "Security error occurred. Please press back, refresh the page, and try again."

Greetings, I had my car painted by a guy who completely unassembled the wiper motors, arms, pivots, etc, to paint the engine bay. This guy, (I'm being nice here) has since died, so I can't ask him what windshield wiper pivots, arms, etc. parts were given back to me when he decided he didn't...

Rob! I have a 69 Fastback, and was looking for wheels! May I ask what size Cragers (?) you have on your car? Front and Rear different? Also, tire size? Thank you, and thanks for all the stuff on Accurate Exhaust. Bill

excellent information! thank you

I'm in good company here, that's for sue. Thank you all

I very much appreciate your efforts and clarity. I purchased the Tach in about 1987 or so, and I'm pretty sure it was factory issued, and as you say, perhaps in a console. I understand the factory in dash Tach's are illuminated by the dash lights. The tach is installed in the dash and it's...

I am hoping you can help me straighten out the wiring on my factory tachometer. I have a 1969 Barracuda with out a factory installed tach. about 15 years ago, I purchased a "factory" tach which mounts perfectly in the empty and small center location. The problem is that all the schematics...

Hello, I have a 1969 Barracuda Fastback Formula S with the Rocker Moldings missing. I was pointed your way to understand if your method would work for me! Are the Duster retainer clips now available? It would seem if the moldings wer reproduced, they would also do the retainers, but...

I stumbled on to a posting of the dissimilarity of the 67-68 and 69 Barracuda's. I need the regulators, but I too don't know if another year will work!

Thanks!

From what I read: 20. The wing ding (vent window on the door) channel and handle is different between the years, '67 has a straight handle, 68+ curves in toward the door. 21. The doors are different, '67 has a screw holding on the wing ding (vent window) which can be seen inside the car, '68...