Search results for query: *

Do you know the rpm power range of this intake manifold so I can figure out torque converter and cam for it?Thanks in advance

Ya thats funny.Gonna borrow that one from ya.But I am thinking to weld in the updated idler arm off of the donner slant six onto my K member just to have everything 74 on my 67 and a sturdier piece in case I happen to hang the front wheels on a good launch and slap her down hard.I am no slouch...

It looks great.Where did you get the right side mount you welded onto your K frame?Is that off the donner slant sux one?

Holy crap I probably wouldn't have noticed that till it was completed.Thank you for the info.The wealth of knowledge here is amazing!

Yes it does have a sway bar.Manual brakes and no power steering.If I can get away with keeping the K-member and mounts as they currently are configured then I would leave them alone and just do the torque strap like you mentioned and swap over what's needed for disk brakes from the donner...

My Barracuda came as a 273 so I have a V8 K member in it but it is the OG squaire puck mounts not the spool mounts.I am building a stroker 360 for it that should push 600hp when done.My question is should I change out from squaire puck to spool mounts and does anyone make weld in brackets to...

Awsome!Thank you exactly what I needed to know.

Does anyone know if a four door 1974 Valiant (dart) slant 6 disk brake,controll arms and complete K-member assembly including upper and lower controll arms and master cylinder will bolt onto a 1967 Barracuda fastback formula S that had 10inch drum front end on it from factory?Basicly the whole...

Is anyone thinking about or looking to sell a LD340 intake?I am in the market for one.Must have good thread holes for carb and t-stat.Non rotted out ports or coolant passages.Shipping cost to 83338 please and thank you in advance.(Pictures are a must too)

PM sent

I am interested. What is shipping to 83338? Also do you have pics of how you mounted them to the frame rails?Is there another (L) bracket that bolts down?And payment??Thanks!

Does anyone know at what the power and flow range is of the LD4B intake? I am looking at cam specs and convertor stall speeds for a 273hp and Eldenbrock tech says they don' have them.

Just picked up a 727 last week and this torque converter in it.Was trying to figure out the markings for sure and what the specs are stamped on it.Was told the stall speed was possibly 2000.It was in the bell housing when I bought the 727 so splines are correct but my early 440 flex plate has a...

Thank you for the follow up info.I am going to order the mounts from Schumacher possibly tomorrow.Just seems more convenient to do it that way and spend more time on other parts of the build.Made the decision to also not wait and go ahead and build the 440 supercharged.Its been one of my long...

Will these mounts still work to be cut and moved.They look different than the ones in the video

I need clarification please...So when you say "You can do anything from Original, K frame and mounts" does that mean the original 273 engine mounts and K frame will work on the 440? Any ideas where to get the kickdown and dipstick tube?

We can work that out.Let me pull the engine the rest of the way out and make sure #5 is ok.It will be a few days before that happens but will PM when removed

Cylinder #5 has taken on the contents of the cooling system for years. The head is warped and pitting on the block and head where the coolant ate the head gasket.The cylinder is pitted and eroded up where the coolant sat and of course that piston was down.The camshaft is gaulled up badly and...

So I just disassemble my small block 273 and found out that it is no good. The good news is is that I have a 440 sitting on an engine stand that could be dropped into my 1967 Fastback Barracuda in place of the small block.Since I haven't shoehorned one into a A body, what am I up against? I've...

Can you please send me pictures of the intake.I I'm looking for good piece that I don't have to spend hours repairing stripped carburetor bolt holes, pulling out a rotten coolant fitting, or dealing with a tore up gasket surface.Shipping would be to 83338 Jerome Id.Thanks

Yes interested and pics please

I am looking for a Edelbrock LD4B intake manifold to go on a 1967 small block 273. Got to be in good shape and usable without a bunch of repairs needed before installing.

I am interested!I will take it.PM sent

Thanks for the reply Halifaxhops.Found some parts over the weekend to put this 7.25 back togeather and gonna run it till it cant take no more.I have lots of priors with rear differentials. They don't seem to live long in any of my vehicles so just gonna have fun till it nukes.Thanks again

In search of a good useable sure grip carrier for my 67 Barracuda with a 7.25 differential.Going to upgrade in the future to a bigger diff when the 440 goes in but in the mean time I want to drive this old gal thats been sitting since 1992 and keep my promise to my son and give him the first...

Do you have a pair still available? Do you know what shipping to Jerome Idaho would be from where you are?Thanks

Are the taillights for a 67 and still available?Could you send me a better picture of them if still available please.Will buy them if the lenses are good.Thank you

Thank you but got lights comming

Hard to tell on my phone but any bends or tweeks in them? How much for the bumpers and what was the bracket price?

Hey cosgig did you happen to get my reply on interest in your bumpers and brackets.Could you please send me some pics.Thank you