Search results for query: *

My 318 ran 12.90 @ 103 stock stroke kb399 pistons around 10:5 compression 360 heads cleaned up 1.88/1.60 erson 488/510 234/244 hdy edelbrock air gap 650 holley dp 904 3500 stall 4.10 gears in a 3400 abody. Ran pretty good for what it was.

I was gonna ask Brian as well. Just thought I would get some ideas.

Brian from imm engines is gonna be doing them and they will be tested. I was thinking that what you said is a good idea to wait until the heads are done.

Yes I was told that they should flow around 295-297 max flow and that's at .550 and 600 lift.

W/373 gears I'm shifting at 6100 and going thru the traps at 6000 rpm. I have 27x10.5 Mickey thompson .

Hello there. Here is my combo: 340 4in crank 11:1 compression comp 246/254 571/571 hyd. roller indy rhs heads soon to be ported 2.02/1.625 air gap intake pro systems 950 flows 830 turbo action 4000 stall 373 gears. 76 dart 3350w/me well the car ran 11.40 @ 116. I wanna get around 11.00s and...

Oh one other thing I have a Mildon low profile pan(7qt). I was wondering if the hooker headers clear the pan?

Thanks guys. I was looking at the hooker 5204s. The car weighs 3250 w/me.

Street/Strip car

I built a 416 smallblock. Here is my combo: RHS heads 2.02/1.625 runners untouched wesco pistons around 11.1 compression comp hdy. roller .571/.571 248/256 107 Edelbrock air gap comp roller rockers 1.5 The question I have is what size headers should I run? and What size carb? Its in a 76 dart...

i agree

I think You should mill the heads .035 and I think you will be fine. run high 13's.

Hi, here's my combo: 318 30 over kb399 360 heads milled .035 1.88/1.60 erson .488/.510 234/244 ed air gap 650 holley dp soon to be trying 750 running a little lean 904 manual valve body 10" turbo action 8 3/4 4.10 gears

I race my dart and run high 12's with my 318.

All Motor! 318's rule!

Good luck! I bought my dart when I was 13 for 100 dollars. It had a slant six with 7 1/4. It took me until I was 16 to get it on the road. I put a roll bar, frame connectors, s/s springs. Then I built a 318 for it and a 904. The rearend is a 8 3/4 with 4.10 gears. The first time i went to the...

I love 4.10s with my 318!

Around here they street race every weekend! they do it at a industrial park. No one is allowed to watch in front of the cars only behind. I would never do it with the track only 25 miles away! Then you can have your time slips tell the story!

I have $2000 in my 318 and it runs just find. It can be done but you don't seem to understand.

Thank you Thats what I was trying to say.

very nice car!

I was just joking but I think a 318 is good motor just like 340 and 360 they are still mopar motors and thats all that matters.

I am tired of poeple bad mouthing 318's saying it takes too much $$$ to make it worth while. Well it doesn't take much. Maybe if poeple knew how to think and build engines then we wouldn't be talking about this just my 2 cents. 318's rule 360's drule!

I would run 360 heads milled with kb399 pistons. I run these heads and a pistons with a 488/510 234/244. Air gap 650 holley dp. I have about $2200 into my engine. Its in a dart it weighs 3400 with me in it. I have 4.10 gears with 3500 stall and run 12.9 at 103. So it doesn't take a lot of cash...

I run a spool and 4.10 gears and love it. I just take wide turns when driving on the street.

I would run the 318. But I like building 318's because a lot of people think it takestoo much money or parts to make them run right,when it doesn't. I don't have that much into my 318 and it runs good.

My dad has a pretty close combo in is dart but it's a 360. only difference is he runs a 750 vs. my 650 holley. hes got 3.91 gears other than that we are about same on combos. He runs 12.80's with his combo.

My combo is: 318 30 over 360 heads 1.88/1.60 milled .035 kb399 erson 488/510 234/244 air gap 650 holley dp 904 3500 stall 8 3/4 4.10 gears hoosier 26x9 slicks race weight is 3400.

I am running a 650 holley dp.

Thanks!