Search results for query: *

ANYONE HAD ANY PROBLEMS WITH MOPAR PLUS INTERIOR REPLACEMENT PARTS???? I saved a few bucks othet places like Classic Industries by ordering my replacement dash bezel for the 67 Barracuda from MOPAR Plus. But, now, I'm not sure about the quality. Installing the new bezel cause a few scratches...

So, I am about to finish reinstalling the new dash Bezel on my 1967 Plymouth Barracuda. I have become very aware that Chrysler engineers were probbaly paid to shorten every cable and wire that they could behind the dash in order to save money. THAT...is the only thing that makes the job...

So, I am currently encountering the joys of replacing my instrument cluster bezel in my 67 Plymouth Barracuda. I've been very careful to label everything and followed a "How To" Sticky on the process. But, my middle name is "Murphy", after Murphy's Law. I bought a new Bezel for just under $700...

Yup! I'm lazy, and not good at deciphering electrical diagrams. *But I am rehabbing the instrument cluster, gauge faces, and lights while I am installing a new Dash Bezel. Below is a picture of the back of my instrument cluster. TO BE SURE LED POLARITY IS CORRECT....WHERE WOULD I CONNECT THE...

So, I have posted pictures of my 67 Cuda with the 318 and Edelbrock 404 carb. I was ordering a new (colored) air filter, and ran into an unusual problem - THE WIDTH OF THE 4 INCH FILTER. Almost all the standard filters, and even Edelbraock ones, are 14 inches wide. That roughly measured what I...

Bought this 16 in Flex-A-Fan to solve a temp problem with my radiator. Only used for the drive from Kingfisher back to OKCity...45 miles. Was over $100 new from Summit Racing. $75 plus Shipping Oklahoma City OBO

Replaced the flip gas cap that came with my car with a newer one. Mild to Mod pitting. Great for a day driver. No screws. Not into collecting parts myelf! $20 OBO plus cheap shipping. Oklahoma City

Used Barracuda taillight assemblies in good-fair condition (Left & Right set) Good enough for day drivers These were incorrectly placed on the rear of my 67, with also the incorrect trunk trim. So, I'm not sure of the year application. But the inserts are smaller than the 68 trim. See here...

LOVE MY '67 Notcback! But, I've got a local MOPAR buddy also looking for a 67-68 Barracuda Notchback, auto trans, maybe ac, and not a rust bucket. He's looking for something under $18,000, and within a days drive of Tulsa, OK. WHATCHA GOT?

Used Barracuda taillight assemblies in good-fair condition (Left & Right set) Good enough for day drivers Mild to moderate pitting - pictures are from all sides of the trim. Right/passenger side is in good shape. Driver's side (closeup picture) has more pitting and very small chip at the bottom...

Brand spanking new - never used. Reproduction Glove Box Trim - coorrection! It is NOT Stainless; too light. Plastic with chrome paint. $40 plus shipping Oklahoma City

A 16 inch blue flange Flex-A-Fan for MOPARS Like New - Barely used on 40 mile drive back from shop as temporary fix for a problem. Asking $75, as it was over $100 new from Summit Racing. Located in OKCity, but can ship. Shipping at buyer's cost

I know that somewhere along this saga with the new to me 1967 Barracuda I have questioned ya'll about the proper thermostat temp for a 318. The consensus was 180 - 190, so I had bought one to include in my latest list for my fav dealer. The old man and son who put this 318 together were clowns...

I am going to use gauge face overlaps in white when I replace the dash bezel; as well as upgrade to LEDs. I have used LEDs in the past to get better Illumunation. But, I have not disassembled the 67 Barracuda dash yet. The gauge face overlay folks I am considering say to simply use their...

So, I've been trying to match up paint on my new to me 67 Barracuda. This car may have been repainted at some point. But, it is obvious that the DD1 paint has discolored some, and burnt out the metallic over the years. In all my Modern MOPARs, I have had excellent luck with...

I'm going to add side markers to my 67 Barracuda, for safety/visibility sake. I have looked at may Barracuda 67-69 pictures, and the rear side marker seems to be placed in several different locations. (Either even with the tip of the rear bumper; or, slightly above.) Is one or the other...

The old guy and his son who put a 318 in my 67 Barracuda, have a fuel line coming off the carburator of what looks like a 8 inch long rod. The problem is the adapter on the end is probably 1/2 inch diameter, and they have run this one 1/2 inch rubber hose to the 5/16 inch nipple off of the fuel...

Trying to contact a member directly, and I get a popup message that I "have reached a limit of 15 conversations"???? Not sure I have actually "started" 15 Conversations. I see no way to delete any. And, more importantly....why is there a limit????

I try do a lot of small paint touchups with a rattle can. I just cleaned up the peeling and little rust spots and repainted my door jams today. With all my "modern" MOPARS, I have used "Automotivetouchup.com" with great results. When I used their color finder on my 67 Barracuda. the DD1 was...

OK, I give up! I installed a passenger side mirror on my 67 Barracuda, and it helps me with the passenger side blind spot trememdously. But, getting to it, and tightening the nut on the end of the fixed post on the mirror was a PITA! I did not make a mental note on the nut size on the end of...

Air vent door on my 67 Barracuda is broken - and no handle. I scavanged what it was to repair the left one.

So, the old man and son who worked the engine in my 67 Barracuda have put in a thermostat that never gets above 150 degrees. Even on 80 degree days, it was barely above 150 sitting in traffic. And now that the daytime temp is in the 50s, not even near 150. And so, very little warmth from the...

This is a continuation of my thread on selling my 68 Trunk lid trim strips. [SOLD] - 1968 Barracuda Trink Trim Panels - Plenty of picture details This is what the 67 looked like when I bought her. Wrong trim. Lines on the proper tails light didn't even come close to matching width. Sold...

Anyone know if this rear pillar interior trim piece has any significance??? Has it on both sides. My guess is, it's an attempt to cover up a "generic" headliner flaw area. If no special significance, I have a "plan" for it. :p Sorry! I got distracted and forgot the picture! :rolleyes:

Backaways, I was asking about paint codes or something on my new=to-me Barracuda, and someone asked me about the fender tag. I said I could not find none! YESTERDAY I found the fender tag loose in the glove box! :p Once I get the engine painted correctly, what is the proper mounting location...

Center Console from my 67 Barracuda. Car is an auto column shift. But previous owner put it in because he "liked" the center console, even through it is nonfunctional. $75 Located in Oklahoma City for pickup; or add shipping.

Is the gear selector on the 67 Barracuda column shifter lighted?

SOLD! UPPER AND LOWER 68 BARRACUDA TRUNK TRIM PIECES. $225 plus shipping from OKC. Previous owner used these on a 67, and merely painted black in between them. ** SOME CLOSEUP PICTURES IN A LATER POST......

I use Mobile 1 in all my other MOPARS. Is synthetic OK to use in my old 318??

A poster on the Facebook Parts page is showing me this picture as the reverse light switch for the '67 Barracuda. He said this is the one shown in the '67 service manual. Does that look right??? Pin doesn't look black, like the one I am seeing on the one source that has the pins.