soonercruiser
Well-Known Member
This is a continuation of my thread on selling my 68 Trunk lid trim strips.
[SOLD] - 1968 Barracuda Trink Trim Panels - Plenty of picture details
This is what the 67 looked like when I bought her. Wrong trim. Lines on the proper tails light didn't even come close to matching width.
Sold that trim, and bought the proper trim strips.
Car club friend welded in the extra 68 trim mounting holes for me late last week.
Weather warmed up enough starting Sunday, that I ground down the welds; light weight filler & sanded; glaze and more sanding today.
Along with that, a coat or 2 of primer to see where the smaller flaws are.
[SOLD] - 1968 Barracuda Trink Trim Panels - Plenty of picture details
This is what the 67 looked like when I bought her. Wrong trim. Lines on the proper tails light didn't even come close to matching width.
Sold that trim, and bought the proper trim strips.
Car club friend welded in the extra 68 trim mounting holes for me late last week.
Weather warmed up enough starting Sunday, that I ground down the welds; light weight filler & sanded; glaze and more sanding today.
Along with that, a coat or 2 of primer to see where the smaller flaws are.
Last edited: