Search results for query: *

Well I finally got around to painting the wheels and having new BFG T/A mounted to find that the backs went on and balanced nicely. When I tried to put the fronts on they rubbed on the caliper's. I could not get them to mount no matter what I tried. I just found out today so I will be calling...

Approx 3 months ago I purchased a set of small bolt pattern 15 x 7" steel wheels with 4.25" back spacing for my 72 dart from a place on ebay that takes original small bolt steel wheel center sections and puts them on new 15" outer steel wheels. When I finally got around to painting them and...

Just wondering if anyone has used spitfire headers in a 72 dart with power steering and with fullsize starter. The car is a 4 speed. Any clearance issues?, Where do they dump out at?. Right now I have stock restrictive original stock manifolds. Will I see a power gain?, I am running 318...

I am still waiting for my buddy to get around to painting the wheels for me. I am hoping to get them back from him in the next week so I can bring it down to get some rubber installed. I will let you know how they balance out at that point. From examining the wheels they appear to be a real...

Thanks for all the advice. Went outside this morning, cleaned up the mounting area for the wiper switch, mounted the switch and tightened it up real good. The wipers work perfectly in all three speeds and when I turn them off the park at the correct position. MAGIC (maybe), good advice from...

Hey George R, thanks for the help. I went outside and pulled the wiper motor switch. The switch itself is not getting hot. While the switch was not mounted in the dash I turned on the wipers and I was only getting one speed (out of the three) regardless of which setting I put the switch to...

I have been trying to get my wipers to work. The old motor was real slow so I replaced it. Prior to installing it I wired it up and turned on the motor without being hooked up to the linkake. All three speeds seemed to be working and the switch seems to be working also. I installed the new...

I purchased a set of 15 x 7 steel wheels with 4.25 backspacing. I know that they will fit the rears will i have any problems with the fronts. Any ideas of what size rubber I should go with. I really want to use BFG radial TA.

I have a 72 dart 318 that was originally an A/C car. I removed all of the A/C components from under the hood but left everything under the dash and I am using the original stock control buttons. I am getting heat through the vents under the dash and all three speeds of the blower motor appear...

Right now I have a completely rebuilt 72 318 that runs excellent but I would like some more power without breaking the bank. Right now it is a stock bore, eddy performer intake and cam, holley 650 carb, 302 heads with 1.88 intake and 1.50 exhaust valves, heads were gasket matched to the intake...

I purchased a set of the same wheels approximately 6 weeks ago. They seem like a quality product. I am in the process of painting them to match my car so they are not mounted yet. It cost me approx $110 shipping for the set of four wheels to Long Island New York. There was a slight problem...