Search results for query: *

I am starting to install a painless wiring harness into a 69 cuda that is in process of being put together. The car is not going to be stock so factory appearance and workings does not matter. It looks like the instructions show how to do it without the factory starter relay on one page and then...

Just curious if anyone makes a complete terminal and connector kit for mopar vehicles. I would like to use one of the universal wiring kits to rewire my car but I do not want to reuse my current connectors and ends. I know painless and some others make mopar specific kits. If you have used one...

I am looking to see if anyone is or knows anyone who is a janitorial equipment (floor scrubbers etc) tech or a packaging equipment tech. Looking to hear about the pros and cons of it. Thanks

Looking to see if anyone has a shift r gate for a reverse pattern valve body that they want to sell that fits a a-body?

Hi everyone I was just trying to clean up the wiring on my 1972 duster and I have a question on what a wire all runs to. I have the manual and I can not find in the wiring diagrams I have where it shows this wire coming to and from the fuse block. The fuse block is labeled brake and LP for the...

Is anyone using the shift-r-gate in their shifter? I was looking at buying the version for the reverse manual valve body. I searched this and found some old topics but nothing recently and it went both ways,some people said it worked good and others said it caused the shifter to hang up. Just...

I tried to search this and I found lots of info on the newer style clips but not too much on what mine look like. I am trying to find where I can purchase new clips that go between the wiper linkage and the pivots? Here is a pic of what mine look like. Thanks

I have for sale a 727 valve body with a transgo TF-3 kit installed making it a full manual valve body. I recieved this valve body in a package deal with some other parts I purchased. I do not know to much about it and have never used it but was told it is clean and works. Asking 40 plus...

Looking to see what size air filter you are running on your car. I have a 408 in a duster with a air gap intake and I am trying to see if a 14x3 air filter with a drop base will fit? By measuring it looks close but I would like to know before I buy one.

I found a good deal on some corbeau seats for my car but there is one issue with them. One seat is nice and black and the other one is a faded black (has brown tint). I was looking up seat dye and came across a product called simply spray fabric paint,has anyone used it or any fabric paint and...

Wondering if anyone has instructions for transgo tf-3 kit? I searched and i cant find them anywhere online. Thanks

I just replaced my alternator because of a bad bearing in old one. I thought I would check voltage with new alternator and it is showing 15.4 volts at the battery. I tried my spare voltage regulator I have and it is the same. Voltage regulator is grounded good. Wires between alternator and...

After putting in super stock springs I am doing a pinion angle check. I have searched all the threads and gathered info but would just like a double check on my numbers before I order shims. The trans is pointed down 1.1 degrees,the driveshaft is at 4.5 degrees down and the rear axle is at 3.6...

Looking for a kickdown/throttle pressure lever (the one on trans) off of a truck or van with a magnum engine and rh (non electronic) trans. I think that would be the 1994-96 range. If you have anything let me know. Thanks

Can anyone tell me if this is a good band for street use. I have read mixed reviews on kevlar bands. http://m.summitracing.com/parts/TCI-125505

What size carb is everyone running on there stroker motor. What I have is a 408 that will turn no more than 6000 rpm. Here are specs,9.5-1 comp,stage 2 factory ported heads,solid lifter cam duration@ .050 intake 244,exhaust 252, lift is intake 537 exhaust 556. Edelbrock rpm air gap intake. 3500...

Does anyone know what all comes in a holley trick kit? Going to be going through my carb and doing some tuning to it. I cant find to much info about specifics of what comes in the trick kit. Thanks

Just looking to see who has used ptc for converter rework or new converter and how it worked for them. I already have a 9.5 converter I just want to send it out and have it checked over.

I have all the underhood a/c parts off my 72 duster sitting around. Do not know if any of it is good and trying to decide if I should keeep it or not? I do not plan on ever putting it back in.

I have a 04 durango 5.7 with 60,000 and warranty untill 85,000. Am thinking of trading in it on a 03 2500 diesel with 160,000 miles. Truck just had new reman trans put in,has edge chip,magnaflow exhaust and k+n intake set up. Was owned by a older person and he used it to tow his camper between...

I have for sale a turbo action 17156 reverse manual valve body. I bought this used off moparts and never used it. I got my kickdown linkage working properly and decided to stay with auto shifting valve body. I was told it is good and working but again I never used it. I am looking to get 80 plus...

I purchased a turbo action valve body off ebay,the listing number was 250692250465. You can see at bottom of listing I asked what part number it was and the reply was 17675 and the part number on the valve body when I recieved it is a 17166. I am not sure if the person did not know what to look...

Looking for recomondations for hotels for monster mopar. Would also like to go to the arch and some other stuff in st louis. Will I be better off staying in collinsville and then driving to st louis to do the stuff there or better off staying in st louis by the arch? I see that doubletree in...

My car has a slight howl and vibration to it when light on gas. I just had driveshaft re-balanced because of it,and that did not change too much. So I think it is pinion angle related,I took all measurements off of u-joint caps and this is what they are. Trans tail shaft is 2.3 degrees...

Does anyone know the length for a driveshaft (center of u-joint to center of u-joint if possible) for a 72 duster with 360,727,8 3/4. Thanks

I just picked up a turbo action manual valve body for a good price. I need one for my car that is mainly street driven. Looking to see how many people use them for street use as I know one with lba is a better option. I am trying to decide if I should just use this one or sell it and buy a...

Is there anyway to make the factory gas gauge work with this fuel cell,jaz 251-016. Or is a aftermarket guage the only way? I have about 1/2 tank in cell and gauge reads empty. Thanks

looking for a manual valve body for a 727.

Has anyone ever installed sprinkler systems or a sand point for lawn wattering? I am looking to install a point and wondering if I should use 1-1/4 of 2 inch diameter and what horsepower pump to use?

For sale is a edelbrock torker 340 intake manifold. Has not been cut anywhere. Did have one of heater hose fitting threads repaired at one time,does not affect operation at all but want to point it out. Asking 75 plus shipping. Item is located in wausau,wi. Thanks