Search results for query: *

I have 11 pairs (one complete engine set plus 3 spare pairs) of new Mopar Performance solid roller lifters for small block Mopar race blocks still in their packages. I took one pair to photograph. Part number is P5249584. See the included picture from the 1997 Mopar Performance catalogue for the...

I have a set of New BRC 4.030" forged flat top pistons and pins for a 3.79" stroke small block crankshaft. Compression height is ~ 1.57" and the ring lands are 1/16, 1/16 and 3/16. 0.984 wrist pins included. Approximately 6cc valve reliefs. These pistons can be used in aftermarket race...

I have 9 new Mopar single valve springs part number P5249838. Price is $45 shipped in the lower 48 states and will ship elsewhere for any added shipping cost.

I have a new set of QA1 upper control arms for 67-72 A Bodies - small ball joint. Part number is 52303. They were installed to the upper mounts but not to the knuckle so ball joints wee not tightened down. They have some scratches but are in excellent shape. $350 delivered in the lower 48...

I have 12 new Mopar Performance 1.5 ratio roller rocker arms for W2 econo heads. This set has the 8 exhaust rockers and 4 left intake rockers. Left intake part number is P4532859 and the Exhaust part number is P4532860.I do not have any right intake rockers. $520 shipped in the lower 48 states...

I have a new K&N 9” outside diameter (7.5” inside diameter) by 5” tall part# KNN-E-3650 & K&N 9# diameter extreme filter top part# KNN-66-0901. Both are new. Comes with a chrome ring at the bottom. One minor dents on the lit edge which you can see on the bottom right of the second picture...

I have two sets and 4 spare BBM used main cap sets for the 2.75" crank journal. See pictures below. $50 a set or $80 for the who lot shipped in the lower 48 states. I will ship elsewhere for the added shipping cost. PM me with any questions.

I am looking for a few Eagle small block H beam connecting rods in very good usable shape. PM me with what you have. Thank you

I have a new set of 16 new Erson big block Mopar roller lifters in their original box. These are 1.6 ratio and have needle roller bearings that ride on the rocker arm shaft. These rockers are USA made, and are very strong and are well constructed. These rockers use an 11/16” hardened shaft that...

I have a new set of TRW L2316 pistons and pins for a 0.030 overbored 340 engine. Specs are: bore 4.070” compression height ~ 1.81” piston pin 0.984” They have had some balancing done to equalize their weights but have not been run. They are a little dusty and have some minor shelf wear from...

I have a new set of 8 Mopar Performance pistons and wrist pins Mopar part# P4876973 for a 3.454” stroke crankshaft. Specs are 4.060” bore, 1/16, 1/16, 3/16 ring set, 0.984” wrist pin, flat top with ~ 5 cc eyebrows, listed by Mopar as 10.5 compression ratio. Compression height is ~ 1.72” per my...

I have a new CAT gear drive for small blocks. New in the box. Opened to take pictures. Clearing out a few excess parts I will not be using. Price is $230 shipped in the lower 48. I will ship internationally for the added cost. PM me with any questions.

I have used Eddy small block RPM dual plane manifold in great shape. All thread holes are fine. No pitting on mating surfaces including thermostat housing. No porting or modifications. $290 plus shipping. PM me with any questions. I have a couple nice used single plane intakes as well if...

I have several ignition parts for sale. Prices include shipping in the lower 48 states. I will ship internationally for the added cost. New MSD Digital 6AL ignition module part #6425 $300 shipped Used chrome ignition box $60 shipped Used coils. Jegs $35 shipped Pentronix coil is sold. Used...

I have a new full set (8 pairs) of Mopar Performance solid roller lifters for small block Mopar race blocks with 59 degree tappet angle that require a taller lifter. The Mopar part number is P5007399. Roller wheel is 0.81". These lifters are in their original packaging and look to be in...

Tubular Automotive Headers for Mopar A Body cars and either W2 or LA heads. They are 1 7/8 OD tubes and are a multi-piece design for easy installation and removal. These can be used on W2 heads or LA heads with the right adapter plate. Adapter plates are included that fit W2 and LA heads. You...

For sale is a black 1982 Nissan 280ZX inline 6 cylinder and 5 speed manual transmission in good running condition. This 280 ZX starts right up and runs well. Drivetrain has 127,900 miles on it. I have owned this car for 4 years and only drive this in the summer when the weather is nice. I have...

A friend of mine is restoring a 67 Dodge Dart Convertible. Does anyone know of any steel or fiberglass door skins that are reproduced for this car? Thanks

I have a few new sets of small block Mopar rocker arm shafts for LA type cylinder heads. These shafts are made here in the U.S. from thick induction hardened steel. They feature banana groves and oiling holes that are positioned for the loading of mechanical rocker arms. These shafts have screw...

I was wondering if anyone had interference with TTI 1 5/8" to 1 3/4" step headers hitting the Borgeson power steering box. I was speaking to TTI the other day and they said while the Borgeson box is smaller, the design of the top of the box is different and can interfere with the front tubes...

I have a few new sets of small block Mopar rocker arm shafts for LA type cylinder heads. These shafts are made here in the U.S. from thick induction hardened steel. They feature banana groves and oiling holes that are positioned for the loading of mechanical rocker arms. These shafts have screw...

I have a used electric puller fan and controller. The parts are in nice shape. Overall measurements are 16.75" x 16.25" x 4.0". The fan blades themselves are 15" diameter. Price is $55 plus shipping. PM me for more information.

I have a Holley 1850-3 vacuum secondary carb that is rebuilt. 600 CFM. Disassembled, cleaned and reassembled with new gaskets and seals. $175 shipped in the U.S. PM me with questions.

I ordered a set of fully grooved Mahle (Clevite) main bearings from Summit. First time I have ordered fully grooved main bearings. I was surprised to see that one of the thrust bearing halves was not fully grooved while all the other 4 journal bearing halves were fully grooved. I called...

I have one set of new ductile iron main caps available for 360 main blocks. These are Mopar Performance caps. The set includes all 5 main caps. The center 3 caps are 4 bolt main. These are the same caps that came standard on R3 4 bolt blocks. I have installed these types of caps before on a...

I have a new Moroso 8mm spark plug wire set for Big Blocks. Moroso part # 72660. The are a little dusty from sitting sitting in the box on the shelf. Information from Summit Racing site reads: Moroso Blue Max Spiral Core custom-fit wire sets have a special strategically-wound 304 stainless...

I have a set of 16 new Mopar valve springs . Six are in the box and the other 10 boxes were in bad shape so they went in the trash. They are in the bag in the photo and sprayed with oil. Description and specs from Mopar are as follows. High-pressure Valve Springs can be used on exhaust and...

For sale is a used set of 8 Diamond forged flat top pistons and pins for a 4.070 bore block and using a 4.000” stroke crankshaft. These pistons use a Chevy sized 0.927” wristpin. These were used in a street-strip engine for a few summers. Part number is 51008. Bore (in.) 4.070 in. Stroke 4.000...

I have 16 new Elgin hydraulic lifters Thani had purchased for a small block LA build. I have sold that project and will not need these lifters. I have had good success with these lifters in the past. $80 shipped in the lower 48 states. PM me with any questions.

I have an older model Sun tach for sale. Comes with the cup and mount as pictured. Worked when removed years ago when I converted my old Dart to a bracket car. $90 shipped in the lower 48 states.