Search results for query: *

ever tried to start an LA engine with the coverter unbolted from the flex plate....ya. new balanced rods. so, Question: dose the tip of the output shaft touch the inside of the converter; if there is to much play in the output shaft could it move the converter?

i have called a bunch of tranny shops and all of them say it dosent happen on 727s. i also called a bunch of machine shops and all of them say an engine wont move the crank forward on its own for any reason.

no, third crank. second block. new converter. same tranz (second rebuild on the tranz.)

i just checked for the 5/16 and it has it. what else would be pushing on the crank; i can push it back into position when the engine is off.

ok, the long and the short of it. i have gone through 3 engines and two trans rebuilds. the same thing continues to happen. my #3 main bearing thrust is being eaten away. the first time i didnt know it was happening until it scattered the engine. the second time i caught it and had...

i have them on my cuda. your dad is into imports? you dont hear that everyday..

or get a new converter thats neutral balanced. thats what i did because i changed my cam so much that i needed to up the converter stall as well.

my first tranny cost $600 and it killed 2 engines before i put another tranny in from a different shop for $1500. you get what you pay for.

pdq 2600 stall.

to keep it brief. i had a shop build a 727 with a cheetah valve body. i knew it was a good valve body because i had been using it. at the same time built my own engine. i had some problems with the shifts, first and reverse. i visited the tanny shop to no avail. i pulled the...